Don-Jo 1165 Replacement Door P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$117.00
$83.30
Don-Jo 1165 Replacement Door Pull with 2" Projection and 12" CTC or Less

Don-Jo 1165 Replacement Door Pull with 2" Projection and 12" CTC or Less

(No reviews yet) Write a Review

Model: 1165-313
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$117.00
$83.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 1165 Replacement Door Pull with 2" Projection and 12" CTC or Less

The Don-Jo 1165 is a commercial-grade replacement door pull engineered for straightforward retrofitting and reliable everyday performance. Featuring a 2" projection and a center-to-center (CTC) spacing of 12" or less, this pull is designed to fit a wide range of existing door preparations, making it an ideal solution for replacement and upgrade applications. Available in finishes 313 and 628, the Don-Jo 1165 suits both functional and aesthetic requirements in commercial door hardware installations.

Key Features

  • 2" Projection: Provides a comfortable, ergonomic grip distance from the door surface, suitable for high-traffic commercial environments.
  • 12" CTC or Less Compatibility: Center-to-center spacing of 12" or less ensures broad compatibility with standard door preparations for seamless replacement installations.
  • Replacement-Ready Design: Engineered specifically as a replacement pull, simplifying retrofits and reducing downtime during hardware upgrades.
  • Multiple Finish Options: Available in finishes 313 and 628 to coordinate with existing door hardware and architectural aesthetics.
  • Commercial Application: Designed and rated for commercial use, delivering the durability and performance required in demanding, high-traffic settings.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1) for precise quantity ordering without unnecessary surplus.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 1165?

Don-Jo door pull products are built to commercial standards, delivering dependable performance in high-traffic applications where consistent, reliable hardware is essential. The 1165 Replacement Pull's 2" projection and broad CTC compatibility make it a practical, versatile choice for facilities managers and contractors seeking a straightforward, professional-grade replacement solution.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Commercial/Residential:
Commercial
Product Model:
1165
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 1165-313 – Frequently Asked Questions

1) Will the Don-Jo 1165 pull line up with the holes already drilled in my door?
The 1165 is a replacement pull built around a center-to-center spacing of 12 inches or less, so it covers the common existing pull preps on commercial doors. Measure hole center to hole center on the door you are pulling the old hardware off of: if that measurement is 12 inches or under, the 1165 is the right family to order. If your existing prep is wider than 12 inches, this one will not reach and you need a longer pull instead.
2) I need to replace a pull on a commercial door but I do not want to redrill. What should I buy?
The Don-Jo 1165 is made for exactly that job. It is a replacement pull sized to drop onto existing preps at 12 inch center-to-center or less, so on most commercial doors you unbolt the old pull and set this one on the same holes. Confirm your CTC measurement first, since anything over 12 inches is outside what this pull spans.
3) Do I get one pull or a back-to-back pair with the Don-Jo 1165?
One pull. The 1165 ships as a shelf pack of 1, so a door that needs a grip on both faces takes two orders. If you actually want a matched back-to-back set out of one box, the Deltana OHP620 off-set handle pull is sold as a back-to-back set, though it is rated for 1-1/8 to 1-3/8 inch doors, which rules out the standard 1-3/4 inch commercial door.
4) What is the closest equivalent to a Don-Jo 1165 door pull if I need a straight commercial pull instead of a replacement-style unit?
The Don-Jo 1165 is a replacement door pull with a 2 inch projection and center-to-center spacing of 12 inches or less, made for dropping into an existing door prep. If the opening does not already have a prep to match, the ABH AB3300 is a straight flat end commercial door pull with a 1.00 inch diameter grip, and the Ives 8103HD is a heavy duty straight pull with a 1 inch round bar mounted through-bolt. Both are straight pulls sized as new-installation hardware rather than a retrofit to existing hole centers.
5) I need more knuckle clearance than a 2 inch projection door pull gives. What should I use?
The Don-Jo 1165 carries a 2 inch projection off the door face. Where a deeper or angled grip is wanted, the Ives 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance, and the Ives 8145 is a 45 degree offset pull with heavy duty mounting hardware in the ADA compliant EZ series. The ABH AB3310 is an offset flat end pull in a surface mount commercial configuration, and the Ives 8169 is a C style offset solid pull at 1 inch diameter. Offset pulls change the hand approach angle rather than simply extending the same straight bar.
6) My hole centers are wider than 12 inches. What pull covers a longer span?
The Don-Jo 1165 is built for center-to-center spacing of 12 inches or less. For a longer grip, the Deltana SSP1210 is a 12 inch contemporary pull for single side mounting, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls, the SSPOBB24 in a modern offset form and the SSPORBB24 in a round offset form. The ABH AB3330 series offset round end pull is offered with custom length options when a stock length does not land on the existing centers.
7) Which of these pull products are not actually a substitute for a Don-Jo 1165?
The Don-Jo 1165 is a grip pull that mounts to hole centers of 12 inches or less. Several items in the same aisle are a different part entirely. The Trimco 1001-1 is a heavy duty push plate at 3 inches by 12 inches and the Trimco 1041 is a half-round push plate at 8 inches by 16 inches, both flat plates pushed rather than gripped. The Trimco 1070 series is a classic push/pull plate at 3-1/2 inches by 15 inches, which is a plate with an integrated pull rather than a bare pull. The Cal-Royal PUL-175 is a night latch cylinder pull at 3-1/2 inch height in stainless steel, which pulls the door closed around a rim cylinder. The Trimco 1035 Ultimate Restroom Pull is a heavy duty restroom-specific pull.
8) How far does the Don-Jo 1165 door pull stand off the door face?
Two inches of projection, measured from the door surface to the grip. That is enough clearance to get a gloved hand behind the bar on a service or warehouse door, and it is the dimension to check if the door swings into a tight vestibule or against a wall where a deep pull would catch.
9) What finishes does the Don-Jo 1165 replacement pull come in?
Two: 313 dark brown aluminum and 628 satin aluminum. 628 is the standard satin aluminum that matches most storefront and aluminum-frame door hardware, while 313 is the dark bronze-toned anodized finish used on dark aluminum storefronts. Match whichever tone the closer, hinges, and push plate on the same opening already wear.
10) Is the Don-Jo 1165 pull heavy enough for a school or hospital entrance?
It is a commercial-rated pull, built for high-traffic openings, and Don-Jo lists it for office buildings, schools, healthcare, retail, warehouses, multi-tenant residential, and government facilities. For an entrance that takes constant abuse and you want a heavier bar, the Ives 8103HD is a heavy duty straight pull with 1 inch round stock and through-bolt mounting, which spreads the load through the door rather than relying on the face alone.
11) What is the difference between a straight pull like the Don-Jo 1165 and an offset pull?
A straight replacement pull like the 1165 runs parallel to the door face at a fixed 2 inch projection, and its mounting holes sit on the same axis as the grip, which is why it drops onto an existing prep. An offset pull angles the grip away from the door so the hand clears the frame or an adjacent panel. If you need offset geometry, the ABH AB3310 flat end and AB3330 round end are offset surface mount pulls, and the Ives 8145EZ is a 45 degree offset. Offset pulls rarely land on a straight pull's hole pattern, so plan on new holes if you switch styles.
12) Can I standardize the Don-Jo 1165 across every door in my building?
Across commercial openings whose existing pull prep measures 12 inch center-to-center or less, yes, and ordering everything in one finish (313 or 628) is how you get the building to read as one set. Where an opening has a wider prep than 12 inches, the 1165 will not span it and that door needs a different pull, so walk the building and log CTC per door before you commit to a quantity.
13) For a high-abuse entrance, what pull carries heavier construction than a Don-Jo 1165?
The Don-Jo 1165 is a commercial replacement pull with a 2 inch projection. Where a heavier bar and mounting is wanted, the Ives 8103HD is a heavy duty straight pull with a 1 inch round bar and through bolt mounting, and the ABH AB7200 is a solid stainless steel flat end pull handle at 7/8 inch diameter, also through-bolt mounted. Through-bolt mounting carries the pull load to the opposite face of the door instead of into the door skin alone.
14) We need pulls on both faces of a door. Does the Don-Jo 1165 cover that, or is there a back-to-back option?
The Don-Jo 1165 is sold individually as a single replacement pull, so a door needing a grip on each face takes two. Products supplied as a matched pair include the Deltana OHP620 off-set handle pull, a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, and the Deltana SSPOBB24 and SSPORBB24, both 24 inch back-to-back offset pulls. The Deltana SSP1210 12 inch contemporary pull is a single side unit like the 1165.
15) Can I use the Don-Jo 1165 on the push side of the door too?
The 1165 is a pull, not a push plate, so on the push face you want a flat plate rather than a projecting bar that hands and carts catch on. Trimco's 1001-1 heavy duty push plate at 3 x 12 inches is the plain option, and the Trimco 1070 Series combines push and pull plates at 3-1/2 x 15 inches if you want both faces to match.
16) Is a round bar or a flat end pull the better match when replacing an existing commercial pull?
The Don-Jo 1165 replacement pull is specified by its 2 inch projection and 12 inch or less center-to-center spacing rather than by grip profile. Among peers the grip shape splits two ways: flat end designs include the ABH AB3300 at 1.00 inch diameter and the ABH AB7200 in solid stainless steel at 7/8 inch diameter, while round bar designs include the Ives 8102HD with a 3/4 inch round bar and the Ives 8103HD with a 1 inch round bar. The ABH AB3330 is an offset round end pull. Grip diameter is what the hand feels; the mounting centers are what has to match the door.
How fast can I get the Don-Jo 1165-313 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 1165-313 come with a warranty?
Absolutely. The Don-Jo 1165-313 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 1165-313?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 1165-313 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!