Don-Jo 17 Cast Door Pull — 10"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$78.26
$68.50
Don-Jo 17 Cast Door Pull — 10" CTC, 10-3/4" Overall, 2-1/4" Projection

Don-Jo 17 Cast Door Pull — 10" CTC, 10-3/4" Overall, 2-1/4" Projection

(No reviews yet) Write a Review

Model: 17-605
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$78.26
$68.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 17 Cast Door Pull — 10" Center-to-Center, 10-3/4" Overall, 2-1/4" Projection

The Don-Jo 17 is a commercial-grade cast door pull engineered for demanding door hardware applications. Featuring a 10" center-to-center (CTC) spacing, a 10-3/4" overall length, a 2-1/4" projection, 1-1/2" clearance, and a 3/4" diameter grip, this pull delivers a confident, ergonomic feel suited to high-traffic commercial environments. Compliant with ANSI J401, the Don-Jo 17 is available in a range of finishes — 605, 606, 613, 628, 629, and 630 — to coordinate with virtually any architectural hardware scheme.

Key Features

  • Precise Center-to-Center Measurement: 10" CTC spacing ensures straightforward, accurate installation on standard commercial door preparations.
  • Generous Overall Length: At 10-3/4" overall, the pull provides a substantial grip area appropriate for commercial door applications.
  • Comfortable Projection & Clearance: A 2-1/4" projection and 1-1/2" clearance deliver an ergonomic hand position for ease of use in high-traffic settings.
  • Sturdy Grip Diameter: The 3/4" diameter bar provides a solid, comfortable grip for consistent daily use.
  • Cast Construction: Cast manufacturing process produces a robust, dimensionally consistent pull suited for commercial-grade performance.
  • Broad Finish Selection: Available in finishes 605, 606, 613, 628, 629, and 630 to complement a wide variety of door hardware and architectural styles.
  • ANSI J401 Compliant: Meets ANSI J401 standards, confirming suitability for commercial door hardware applications.

Certifications & Compliance

  • ANSI J401 Compliant
  • Commercial-Grade Product

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Subcategory: Pulls and Push Plates
  • Commercial/Residential: Commercial
  • Product Model: 17
  • (CTC) Center-to-Center: 10"
  • Product Size: 10 3/4"
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 17?

Don-Jo 17 door pulls are built to commercial standards with cast construction that ensures dimensional consistency and long-term durability in demanding environments. ANSI J401 compliance and a broad selection of six finishes make the Don-Jo 17 a reliable, versatile choice for architects, contractors, and facility managers seeking professional-grade door trim hardware.

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Pulls and Push Plates
Commercial/Residential:
Commercial
Clearance:
1-1/2"
ANSI/BHMA:
J401
Product Model:
17
(CTC) Center-to-Center:
10"
Product Size:
10 3/4"
Product Diameter:
3/4"
Product Projection:
2-1/4"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 17-605 – Frequently Asked Questions

1) Will the Don-Jo 17 door pull line up with my existing pull holes at 10 inch centers?
The Don-Jo 17 is drilled on 10 inch center-to-center spacing, with a 10-3/4 inch overall length. If the holes in your door or existing pull are on 10 inch centers, it drops straight in. Anything else, and you are redrilling or covering the old holes with a plate. Measure hole center to hole center, not end to end, before you order.
2) Is the Don-Jo 17 pull ANSI rated for commercial work?
It carries ANSI/BHMA J401, which is the door pull designation, and it is built as a commercial product rather than a residential one. If your spec sheet or submittal calls for a J401 pull, the 17 answers it directly. Cast construction, 3/4 inch bar.
3) I need an ADA compliant door pull for a public entrance. Is the Don-Jo 17 the right one?
The Don-Jo 17 is a straight cast pull rated to ANSI/BHMA J401, with a 3/4 inch bar and 1-1/2 inch clearance. If your submittal specifically calls out ADA compliance on the pull itself, the Ives 8145EZHD is the 45 degree offset pull carried as ADA compliant. Spec that one where the drawing names ADA.
4) I need a pull that works with a night latch cylinder. Does the Don-Jo 17 do that?
No. The 17 is a plain 10 inch CTC bar pull with no cylinder prep. For a storefront or aluminum door where the cylinder passes through the pull, use a night latch style pull instead, such as the Cal-Royal PUL-175 at 3-1/2 inches in stainless steel.
5) What should I use instead of the Don-Jo 17 if I want a thicker grip on a heavy entrance door?
Step up to a 1 inch bar. The Ives 8103HD is a heavy duty straight door pull with a 1 inch round bar and through-bolt mounting, and the Ives 8169 is a C style offset solid pull, also 1 inch diameter with heavy duty mounting. The ABH AB3300 is a straight flat end pull at 1.00 inch diameter as well. The Don-Jo 17 carries a 3/4 inch diameter grip, so if the specification on the drawing calls for a full inch bar, the 17 will not satisfy it.
6) What is the closest equivalent to the Don-Jo 17 door pull from another manufacturer?
The Ives 8102HD heavy duty straight door pull is the nearest match. It uses the same 3/4 inch round bar and the same 1-1/2 inch clearance as the Don-Jo 17, so the grip diameter and knuckle space behind the bar are identical. The Don-Jo 17 is a cast pull with 10 inch center-to-center spacing, 10-3/4 inch overall length, and 2-1/4 inch projection. If you are standardizing a building on one grip feel, either pull gives a hand the same 3/4 inch bar to close on.
7) Is there an ADA compliant alternative to the Don-Jo 17 door pull?
The Ives 8145EZHD is a 45 degree offset door pull in the EZ series, described as ADA compliant and supplied with heavy duty mounting hardware. Its offset geometry is the difference: the bar sits at an angle to the mounting posts rather than running straight between them like the Don-Jo 17, which is a straight cast pull with 10 inch center-to-center spacing and 2-1/4 inch projection. If an accessibility reviewer is signing off on your openings, the 8145EZHD is the one carrying that claim.
8) Can I use the Cal-Royal PUL-175 in place of the Don-Jo 17?
Only if the door has a rim cylinder in it. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inches in height, stainless steel construction, and it is designed to carry the cylinder for a night latch rather than to serve as a general door pull. The Don-Jo 17 is a plain cast pull, 10-3/4 inches overall with 10 inch center-to-center spacing and no cylinder provision. On a storefront or service door already prepped for a night latch cylinder, the PUL-175 is the correct part; on an unprepped door where you just need a grip, it is not.
9) How much hand clearance does the Don-Jo 17 pull give behind the grip?
1-1/2 inches of clearance between the bar and the door face, on a 2-1/4 inch total projection. That is the gap your knuckles get, and it is enough for a gloved hand. The bar itself is 3/4 inch diameter, so the grip fills a hand rather than cutting into it, which matters on doors people pull hundreds of times a day.
10) What finishes does the Don-Jo 17 cast door pull come in?
Six finishes: 605 polished brass, 606 satin brass, 613 oil rubbed bronze, 628 satin aluminum, 629 bright stainless, and 630 satin stainless. For a building already standardized on aluminum storefront or stainless lever trim, 628 and 630 are the two that match without looking added-on. 613 is the one to pick against dark bronze frames.
11) Is a 10 inch pull long enough, or should I be looking at a longer door pull?
At 10 inches CTC and 10-3/4 inches overall, the Don-Jo 17 is a standard single-hand entry pull, sized for someone grabbing it at one height. If you need a full-height grab for a glass front or a heavy monumental door where people take it at different heights, go longer: the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back pulls built for that. For a 12 inch single-side option, the Deltana SSP1210 is the closer step up.
12) Should I use a straight pull or an offset pull on my door?
A straight pull like the Don-Jo 17 mounts with both ends landing on the same line, so the bar sits parallel to the door edge and the 2-1/4 inch projection is uniform top to bottom. Pick it where the pull sits in open door face and nothing crowds it. Offset pulls angle the grip away from the door, which buys hand room where the pull sits close to a frame or a lock, or where you want the arm at a different angle: the ABH AB3310 and AB3330 are offset options, and the Ives 8169 is a C style offset at 1 inch diameter.
13) Can I put the Don-Jo 17 pull on one side and a push plate on the other?
That is the normal push/pull pairing on a commercial door, and the 17 handles the pull side. On the push side, the Trimco 1001-1 is a 3 by 12 inch heavy duty push plate, the Trimco 1041 is a half-round 8 by 16 inch plate for a bigger target, and the Trimco 1070 Series comes as a 3-1/2 by 15 inch classic push/pull set. Match the plate finish to whichever of the six pull finishes you order.
14) How much does the Don-Jo 17 pull stick out from the door face, and will it clear a door swinging past it?
Total projection is 2-1/4 inches off the face, of which 1-1/2 inches is open clearance behind the bar and the rest is the 3/4 inch grip. That is what you check against a door that swings back against a wall, a pair of doors that meet, or anywhere a 2-1/4 inch obstruction on the face becomes a problem. On a pull side facing open traffic it is a non-issue.
15) What is the right pull for a restroom door if I am already using the Don-Jo 17 elsewhere in the building?
The Trimco 1035 Ultimate Restroom Pull is the purpose-built option for that opening and is rated heavy duty. Restroom doors are usually pulled with a forearm or an elbow rather than a full grip, which is why the pattern differs from a standard bar pull. The Don-Jo 17 remains the general-purpose commercial pull for the rest of the doors, with its 3/4 inch bar, 10 inch center-to-center spacing, and 1-1/2 inch clearance, and it is offered in finishes including 628 satin aluminum and 630 satin stainless steel if you want the restroom hardware to read close to the rest of the building.
16) Which pull should I specify if the job requires through-bolt mounting rather than surface mounting?
The Ives 8103HD is a heavy duty straight pull with a 1 inch round bar specified with through bolt mounting, and the ABH AB7200 is a solid stainless steel flat end pull with a 7/8 inch diameter and through-bolt mounting. By contrast the ABH AB3310 offset flat end pull is specified as surface mount. Through-bolting puts the load through the door rather than into the face material, which is what most commercial specifications call for on an active entrance.
17) Will the Don-Jo 17 hold up in a high traffic building entrance?
It is a cast commercial pull, not a stamped or tubular one, so the bar and the mounting bosses are one piece of metal. That is the construction you want on a door cycled all day in an office lobby, a school corridor, or a hospital wing. Order 630 satin stainless or 628 satin aluminum where hand oil and cleaning chemicals are constant; polished 605 and 629 show fingerprints faster.
How fast can I get the Don-Jo 17-605 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 17-605 come with a warranty?
Absolutely. The Don-Jo 17-605 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 17-605?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 17-605 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!