Don-Jo 15 Cast Door Pull — 6" ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.16
$18.82
Don-Jo 15 Cast Door Pull — 6" CTC, 6-3/4" Overall, 2-1/4" Projection

Don-Jo 15 Cast Door Pull — 6" CTC, 6-3/4" Overall, 2-1/4" Projection

(No reviews yet) Write a Review

Model: 15-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.16
$18.82
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 15 Cast Door Pull — 6" CTC, 6-3/4" Overall, 2-1/4" Projection

The Don-Jo 15 is a cast door pull engineered for commercial applications, offering a 6" center-to-center (CTC) spacing, a 6-3/4" overall length, a 2-1/4" projection, and a 1-1/2" clearance. With a 3/4" diameter grip and compliance with ANSI J401, this pull delivers a solid, professional-grade feel suited to high-traffic commercial environments. Available in a range of finishes — 605, 606, 613, 628, 629, and 630 — the Don-Jo 15 integrates seamlessly with a wide variety of door styles and architectural aesthetics.

Key Features

  • Precise Center-to-Center Spacing: 6" CTC measurement ensures straightforward, accurate mounting on standard commercial door preparations.
  • Generous Overall Length: 6-3/4" overall length provides a comfortable, full-hand grip for ease of use in busy commercial settings.
  • Optimal Projection & Clearance: 2-1/4" projection and 1-1/2" clearance deliver ergonomic hand positioning and comfortable operation.
  • Substantial Grip Diameter: 3/4" diameter bar offers a solid, confident grip suitable for heavy daily use.
  • Cast Construction: Cast manufacturing process produces a durable, consistent pull with a refined appearance appropriate for commercial door trim applications.
  • Multiple Finish Options: Available in finishes 605, 606, 613, 628, 629, and 630 to coordinate with existing door hardware and architectural specifications.
  • ANSI J401 Compliant: Meets ANSI J401 standards, confirming suitability for commercial door hardware applications.

Certifications & Compliance

  • ANSI J401 Compliant
  • Commercial Grade

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Subcategory: Pulls and Push Plates
  • Commercial/Residential: Commercial
  • Product Model: 15
  • (CTC) Center-to-Center: 6"
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 15?

Don-Jo 15 door pulls are built to commercial standards, combining cast construction with ANSI J401 compliance to deliver consistent, reliable performance in demanding environments. The precise 6" CTC, 6-3/4" overall length, and 3/4" diameter grip reflect careful engineering for professional door hardware installations. With six available finishes, the Don-Jo 15 offers the flexibility needed to meet diverse architectural and specification requirements.

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Pulls and Push Plates
Commercial/Residential:
Commercial
Clearance:
1-1/2"
ANSI/BHMA:
J401
Product Model:
15
(CTC) Center-to-Center:
6"
Product Size:
6-3/4"
Product Diameter:
3/4"
Product Projection:
2-1/4"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 15-628 – Frequently Asked Questions

1) Will the Don-Jo 15 pull line up with my existing 6 inch center-to-center door prep?
Yes. The Don-Jo 15 is drilled 6 inches center to center, so it drops onto an opening already prepped for a 6 inch CTC pull without new holes. Overall length is 6-3/4 inches, so the mounting posts sit close to the ends of the bar. If your existing prep is anything other than 6 inch CTC, this one won't line up.
2) What does ANSI J401 mean on a door pull, and does the Don-Jo 15 meet it?
J401 is the ANSI/BHMA A156.6 architectural door trim designation for a pull, and the Don-Jo 15 carries it. For an institutional spec that calls out door pulls by BHMA type number, that is the line item you match. It's a commercial-rated pull, not a residential decorative one.
3) Is a 6 inch pull long enough, or should I use a longer offset pull on a glass or entrance door?
At 6-3/4 inches overall the Don-Jo 15 is a short grab pull, sized for one hand on a service door, stockroom, restroom, or mechanical room. It is not an entrance-door pull. For a storefront or glass entrance where the customer expects a full forearm grip, go to something like the Deltana SSPOBB24, a 24 inch back-to-back offset pull, or the Deltana SSP1210 12 inch contemporary pull for a single-side application.
4) The Don-Jo 15 is a straight pull. What do I order if the opening needs an offset pull?
The Don-Jo 15 is a straight cast pull with a 2-1/4" projection off the door face. When the opening calls for an offset instead, the Ives 8145 is a 45 degree offset door pull with heavy duty mounting hardware in the ADA compliant EZ series, the Ives 8169 is a C style offset solid pull at 1" diameter with heavy duty mounting, and the ABH AB3310 is an offset flat end door pull for surface mount. Offset pulls angle the grip away from the door, which is the usual answer where a straight bar sits too close to a frame, a mullion, or an adjacent leaf.
5) What is the closest equivalent to a Don-Jo 15 door pull if I need to match the same grip and clearance?
The Don-Jo 15 uses a 3/4" diameter grip bar with 1-1/2" clearance behind it. The Ives 8102HD is a heavy duty straight door pull built on the same 3/4" round bar with 1-1/2" clearance, so a hand coming off one feels the same on the other and the knuckle space at the door face is unchanged. The Don-Jo 15 is a cast pull sized at 6" center-to-center with a 6-3/4" overall length, so confirm the Ives length you order lines up with the holes already drilled before you swap.
6) I want a thicker grip than a 3/4" bar pull for a heavy entrance door. What should I use instead?
The Don-Jo 15 grip bar is 3/4" in diameter. If you want more bar in the hand, the Ives 8103HD is a heavy duty straight door pull on a 1" round bar with through bolt mounting, and the ABH AB3300 is a straight flat end commercial door pull at 1.00" diameter. Both put a fuller section under the palm on a door that gets pulled hard all day. Through bolting, as on the 8103HD, carries the pull load to the opposite face of the door rather than into surface screws alone.
7) I need a longer grip than 6-3/4" for a full-height glass or storefront door. What are my options?
The Don-Jo 15 is a short pull at 6-3/4" overall on 6" centers, sized for a hand rather than a forearm. For a long grip, the Deltana SSP1210 is a 12" contemporary pull for single side mounting, the Deltana SSPOBB24 is a 24" back-to-back modern offset pull set, and the Deltana SSPORBB24 is a 24" back-to-back round offset pull set. The ABH AB3330 series offset round end pull is offered with custom length options if a stock length does not land on your mounting.
8) Is a push plate a substitute for a Don-Jo 15 pull?
No. The Don-Jo 15 is a grip pull with a 3/4" bar standing 2-1/4" off the door, meant for the side that gets pulled open. A push plate is a flat plate with nothing to grab: the Trimco 1001-1 is a 3" x 12" heavy duty push plate and the Trimco 1041 is an 8" x 16" half-round heavy duty push plate. On a single-acting door the two go on opposite faces, pull on the swing side and plate on the push side, so a plate is a companion to a pull rather than a replacement for one. The Trimco 1070 series pairs classic push and pull plates at 3-1/2" x 15" if you want the pull carried on a plate instead of mounted to bare door.
9) Will a Cal-Royal PUL-175 do the same job as a Don-Jo 15?
They are different parts. The Don-Jo 15 is a plain cast door pull, 6" center-to-center with a 6-3/4" overall length, and it does nothing but give the hand something to pull. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2" in height, stainless steel construction, which means it is machined to carry a cylinder and serve a night latch function on the outside of the door. If the door needs key control at the pull, the PUL-175 is the one to look at. If the lock hardware is handled elsewhere on the door, the Don-Jo 15 is the straightforward pull.
10) How much hand room is behind a Don-Jo 15 door pull for someone wearing gloves?
Clearance behind the grip is 1-1/2 inches, with a total projection off the door face of 2-1/4 inches. The bar itself is 3/4 inch diameter, which accounts for the difference between the two numbers. That 1-1/2 inch gap is enough for a gloved hand, which is why it holds up on warehouse, mechanical room, and back-of-house doors.
11) I have stainless steel lever sets and push plates on my doors. Which Don-Jo 15 finish matches?
Two stainless options: 629 bright stainless steel for polished trim, and 630 satin stainless steel, which is the one that matches most commercial lever sets and push plates in a building. If your existing hardware is aluminum storefront trim, 628 satin aluminum is the match. The full range is 605 polished brass, 606, 613 oil rubbed bronze, 628, 629, and 630.
12) Can I put a Don-Jo 15 on one side and a push plate on the other?
That is the standard push/pull setup, and the 15 is built for it. It handles the pull side; the push side takes a plate like the Trimco 1001-1 heavy duty push plate at 3 by 12 inches, or the Trimco 1041 half-round plate at 8 by 16 inches for a wider door face. Match the finish across both so the opening reads as one set.
13) Does the Don-Jo 15 pull have a handing?
No handing on the Don-Jo 15. It is a symmetrical straight bar at 6 inch CTC, so the same part goes on a left or right hand door and on either face. Order by finish only. Decorative pulls are where handing shows up, for example the Emtek Art Nouveau 8 inch pull, which is ordered with a handing selection.
14) Is the Don-Jo 15 heavy enough for a high-traffic commercial door, or is it a decorative pull?
Cast construction with a 3/4 inch solid grip bar, rated commercial and carrying the ANSI J401 door trim designation. That is a working pull for offices, schools, healthcare corridors, retail, and multi-family common areas, not a residential trim piece. The 3/4 inch bar is the same grip diameter used on heavy duty commercial pulls like the Ives 8102HD.
15) Can I use a Don-Jo 15 as the pull on a restroom door where staff open with a forearm?
The Don-Jo 15 is a conventional commercial grip pull, 6" center-to-center with a 3/4" bar, so the hand goes on the bar. If the goal is opening a restroom door without gripping it, the Trimco 1035 Ultimate Restroom Pull is the heavy duty part built for that job. Specify the 1035 where a facility wants a hands-free or forearm pull, and the Don-Jo 15 where a standard hand pull is what the opening needs.
16) Which pull should I standardize on across a facility if I want stainless steel and through-bolted mounting?
The Don-Jo 15 is a cast commercial pull meeting ANSI J401, offered in 629 bright stainless steel and 630 satin stainless steel. If the standard needs solid stainless with through-bolt mounting called out on the part itself, the ABH AB7200 is a solid stainless steel flat end pull handle at 7/8" diameter with through-bolt mounting, and the Ives 8103HD is a 1" round heavy duty pull with through bolt mounting. Through-bolting is worth specifying where a facility is standardizing on one pull across high-traffic openings and does not want to revisit fastener pull-out.
17) Do I need a different pull for a restroom door where people don't want to touch the handle?
The Don-Jo 15 is a plain grab pull with a 1-1/2 inch clearance behind the bar, so it is pulled by hand. For a restroom exit where the intent is a forearm or elbow pull, the Trimco 1035 Ultimate Restroom Pull is the purpose-built option. Use the 15 where a conventional hand pull is what the opening calls for.
How fast can I get the Don-Jo 15-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 15-628 come with a warranty?
Absolutely. The Don-Jo 15-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 15-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 15-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!