Don-Jo 14 Door Pull, 5-1/2" CT...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$33.48
Don-Jo 14 Door Pull, 5-1/2" CTC, 3/4" Diameter, 6-1/4" Overall, 2-1/4" Projection

Don-Jo 14 Door Pull, 5-1/2" CTC, 3/4" Diameter, 6-1/4" Overall, 2-1/4" Projection

(No reviews yet) Write a Review

Model: 14-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$33.48
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 14 Door Pull — 5-1/2" CTC, 3/4" Diameter, 6-1/4" Overall

The Don-Jo 14 Door Pull is a commercial-grade door pull engineered for reliable, everyday performance in demanding environments. Featuring a 5-1/2" center-to-center (CTC) spacing, a 3/4" diameter grip, and a 6-1/4" overall length, this pull provides a comfortable and secure handhold for users. With a 2-1/4" projection and 1-1/2" clearance, it accommodates a natural grip while maintaining a low-profile, professional appearance. Available in a range of finishes — 605, 606, 613, 628, 629, and 630 — to complement virtually any door hardware scheme.

Key Features

  • Center-to-Center Spacing: 5-1/2" CTC measurement ensures consistent, code-friendly mounting for standard commercial door applications.
  • Grip Diameter: 3/4" diameter provides a comfortable, ergonomic handhold suitable for high-traffic commercial use.
  • Overall Length: 6-1/4" overall length delivers a proportional, professional look on a wide variety of door styles.
  • Projection & Clearance: 2-1/4" projection and 1-1/2" clearance allow for a natural, full-hand grip without interference from the door surface.
  • Multiple Finish Options: Available in finishes 605, 606, 613, 628, 629, and 630 to coordinate with existing door hardware and architectural aesthetics.
  • ANSI Compliance: Meets ANSI J401 standards, confirming suitability for commercial door hardware applications.
  • Commercial-Grade Construction: Designed for commercial use, providing the durability and longevity required in high-traffic settings.

Certifications & Compliance

  • ANSI J401 Compliant
  • Commercial Grade

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Subcategory: Pulls and Push Plates
  • Commercial/Residential: Commercial
  • Product Model: 14
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 14?

Don-Jo door pulls are built to commercial-grade standards, with the Model 14 meeting ANSI J401 requirements for dependable performance in high-traffic environments. With a broad selection of six finishes and precise dimensional specifications — including a 5-1/2" CTC, 3/4" diameter, and 6-1/4" overall length — this pull is engineered to deliver consistent, professional results across a wide range of commercial door hardware applications.

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Pulls and Push Plates
Commercial/Residential:
Commercial
Clearance:
1-1/2"
ANSI/BHMA:
J401
Product Model:
14
(CTC) Center-to-Center:
5-1/2"
Product Size:
6-1/4"
Product Diameter:
3/4"
Product Projection:
2-1/4"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 14-628 – Frequently Asked Questions

1) Does the Don-Jo 14 door pull meet ANSI J401?
Yes, the Model 14 is built to ANSI/BHMA J401. J401 is the pull designation in the A156.6 architectural door trim standard, so if your spec or submittal calls out a J401 pull, this one answers it directly. That matters on school, healthcare, and government work where the hardware schedule cites the BHMA designation rather than a part number.
2) Is a 6-1/4 inch pull long enough for a main entrance door, or do I need something bigger?
The Don-Jo 14 is a short 6-1/4 inch grip pull. It suits a door where you pull with one hand: restroom doors, stairwell and corridor doors, equipment rooms, office suite doors, often paired with a push plate on the opposite side. For a glass or aluminum storefront entrance where the look calls for a full-height ladder pull, go to something like the Deltana SSP1210 at 12 inches, or a 24 inch back-to-back set such as the Deltana SSPOBB24. Those are a different job.
3) Is the Don-Jo 14 a straight pull or an offset pull?
Straight. The grip runs parallel to the door face on 5-1/2 inch centers with both posts the same 2-1/4 inch projection, so it is a symmetrical straight bar with no handing to specify. Order it the same for a left or right hand door. If you need the angled style that clears a push bar or lets the hand come in at an angle, that is an offset pull, like the ABH AB3310 flat end offset or the Ives 8145EZ 45 degree offset.
4) What is the closest equivalent to a Don-Jo 14 door pull with a 3/4 inch grip and 1-1/2 inch clearance?
The Ives 8102HD is the nearest match on grip geometry: it is a heavy duty straight door pull built on a 3/4 inch round bar with 1-1/2 inch clearance, the same bar diameter and clearance the Don-Jo 14 carries. The Don-Jo 14 fixes its mounting at 5-1/2 inch center-to-center with a 6-1/4 inch overall length and 2-1/4 inch projection, so if you are matching existing hole spacing on a door, confirm the 8102HD centers against that 5-1/2 inch dimension before you drill. Both are straight pulls intended for commercial openings.
5) The Don-Jo 14 is a straight pull. What should I use if the opening needs an offset pull instead?
For an offset grip, the Ives 8169 is a C style offset solid door pull at 1 inch diameter with heavy duty mounting, and the Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware from the ADA compliant EZ series. On the ABH side, the AB3310 is an offset flat end commercial pull with surface mount, and the AB3330 series is an offset round end pull with custom length options. An offset pull angles the grip away from the door face, which changes how the hand approaches the pull compared with the straight 2-1/4 inch projection of the Don-Jo 14.
6) My facility spec calls for ADA compliant door pulls. Which pull in this class is stated as ADA compliant?
The Ives 8145EZHD, a 45 degree offset door pull with heavy duty mounting hardware, is the one stated as ADA compliant in its EZ series. The Don-Jo 14 is a commercial door pull meeting ANSI J401, which is the hardware standard for pulls rather than an accessibility statement. If your drawing carries an explicit ADA callout on the pull itself, the 8145EZHD is the item to put on the submittal; if it calls for ANSI J401, the Don-Jo 14 answers it.
7) Is the Trimco 1001 push plate a substitute for a Don-Jo 14 door pull?
No. The Trimco 1001-1 is a heavy duty push plate measuring 3 inches by 12 inches, a flat plate for the push side of an opening with nothing to grip. The Don-Jo 14 is a door pull with a 3/4 inch diameter grip on a 5-1/2 inch center-to-center mounting and 1-1/2 inch clearance behind the bar. They are commonly ordered together on a single opening, pull on one face and push plate on the other, but one does not replace the other. If you want both functions on the same plate, the Trimco 1070 series classic push/pull plates at 3-1/2 by 15 inches combine a plate with a pull.
8) Is there enough hand clearance on the Don-Jo 14 pull for a gloved grip?
1-1/2 inches of clearance between the grip and the door face, with a 2-1/4 inch total projection off the door. The bar itself is 3/4 inch diameter round. That is a full-hand grip with a work glove on, and it is the same clearance figure as the Ives 8102HD heavy duty straight pull, which also uses a 3/4 inch round bar.
9) Which finishes does the Don-Jo 14 door pull come in, and which one matches my aluminum storefront?
Four finishes ship on the Model 14: 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel. For aluminum storefront and most clear-anodized frames, 628 satin aluminum is the match. On stainless push plates, kick plates, and healthcare or foodservice work, 630 satin stainless is the one that blends. 613 is the dark bronze used with bronze-anodized frames.
10) What is the difference between the Don-Jo 14 and the Ives 8102HD or 8103HD pulls?
All three are straight commercial pulls. The Don-Jo 14 and the Ives 8102HD both use a 3/4 inch round bar with 1-1/2 inch clearance, so they are the closest match on grip feel. The Ives 8103HD steps up to a 1 inch round bar and is through-bolt mounted, as is the ABH AB3300 at 1 inch diameter. Go to the 1 inch bar where the door takes heavy abuse or the spec calls for through-bolting; stay at 3/4 inch where you want a slimmer grip and are matching existing 3/4 inch pulls elsewhere in the building.
11) I need a pull and a push plate for the same door. Does the Don-Jo 14 work as a push-pull set?
The Model 14 is the pull half only, one side of the door. Pair it with a push plate on the swing side. The Trimco 1001-1 heavy duty push plate at 3 by 12 inches is the common size for a standard 1-3/4 inch commercial door, and the Trimco 1041 half-round at 8 by 16 inches covers the larger palm-and-forearm push area. Match the plate finish to the pull, 630 satin stainless being the usual pairing on commercial work.
12) I need a pull mounted on both faces of the door. Does the Don-Jo 14 come as a back-to-back set?
The Don-Jo 14 is specified as a single pull with a 5-1/2 inch center-to-center and 6-1/4 inch overall length. For a set that mounts on both faces from one set of holes, the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for doors 1-1/8 inch to 1-3/8 inch thick, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back pulls in modern offset and round offset styles. Note the door thickness range on the OHP620 before ordering, since back-to-back hardware is sized to the leaf it bolts through.
13) I want a thicker grip than 3/4 inch on a commercial door pull. What are my options?
The Don-Jo 14 uses a 3/4 inch diameter grip. If you want a fuller bar in the hand, the Ives 8103HD is a heavy duty straight pull on a 1 inch round bar with through bolt mounting, and the ABH AB3300 is a straight flat end commercial pull at 1.00 inch diameter. The ABH AB7200 sits between them at 7/8 inch diameter, in solid stainless steel with through bolt mounting. All three are straight pulls like the Don-Jo 14, so the change is grip thickness and mounting method rather than the shape of the pull.
14) What is a longer pull than the 6-1/4 inch Don-Jo 14 for a glass or entrance door?
The Don-Jo 14 is 6-1/4 inch overall on a 5-1/2 inch center-to-center, which suits a hand-height grip rather than a full-height entrance pull. For longer runs, the Deltana SSP1210 is a 12 inch contemporary pull mounted on a single side, and the Deltana SSPOBB24 and SSPORBB24 are 24 inch pulls supplied back-to-back in modern offset and round offset profiles. The ABH AB3330 series offset round end pull is offered with custom length options if the opening needs a length outside the stock sizes.
15) Can a Cal-Royal PUL-175 be used in place of a Don-Jo 14 on a storefront door?
They do different jobs. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch high in stainless steel construction, meaning it is a pull built around a cylinder opening so the door can be keyed and pulled at the same point. The Don-Jo 14 is a plain grip pull, 3/4 inch diameter with a 2-1/4 inch projection and no cylinder provision. If the door needs a key cylinder at the pull location, the PUL-175 is the right family; if the locking is handled elsewhere on the door, the Don-Jo 14 is the straightforward pull.
16) Will the Don-Jo 14 pull work on a restroom door where people do not want to touch the handle?
It works as a standard grip pull, but if the ask is a hands-free or forearm-operated restroom exit, that is a different part. The Trimco 1035 Ultimate Restroom Pull is the heavy duty item built for that opening. Use the Don-Jo 14 where a conventional 3/4 inch round grip on 5-1/2 inch centers is what the schedule calls for.
17) For a restroom door, is the Don-Jo 14 the right pull or is there something purpose-built?
The Don-Jo 14 is a commercial pull with a 3/4 inch grip and 1-1/2 inch clearance that will serve a restroom door fine. If you want a pull designed for that specific opening, the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull in the 1035 series built for restroom use. For the push face of the same opening, the Trimco 1041 is a heavy duty half-round push plate at 8 inch by 16 inch.
How fast can I get the Don-Jo 14-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 14-628 come with a warranty?
Absolutely. The Don-Jo 14-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 14-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 14-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!