Don-Jo 3-CW 3 CW Wrap Around f...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$33.60
$16.49
Don-Jo 3-CW wrap around door reinforcer, 1-3/8" door, 2-3/4" backset, 2-1/8" hole, Satin Stainless Steel finish

Don-Jo 3-CW 3 CW Wrap Around for 1-3/8" Door with 2-3/4" Backset and 2-1/8" Hole

(1 review) Write a Review

Model: 3-S-CW
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$33.60
$16.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 3 CW Wrap Around for 1-3/8" Door with 2-3/4" Backset and 2-1/8" Hole

The Don-Jo 3 CW Wrap Around is a commercial-grade reinforcement plate for cylindrical door locks on 1-3/8" doors with a 2-3/4" backset. Measuring 4-1/4" wide by 9" tall with a 2-1/8" cross bore and latch prep indent, it is constructed from 22-gauge (.032) steel. Available in five finishes: 10B (613), AB (609), BZ (612), PB (605), and S (630). A display-packaged version is available by replacing "CW" with "V" in the item number.

Key Features

  • Door Thickness: Fits 1-3/8" doors for a precise, secure fit on standard interior and light commercial doors.
  • Backset: 2-3/4" backset for correct alignment with cylindrical lock installations.
  • Cross Bore: 2-1/8" hole sized for cylindrical lock prep, with latch prep indent for accurate positioning.
  • Profile: 4-1/4" wide by 9" tall, providing full coverage around the lock area.
  • Construction: 22-gauge (.032) steel for lasting strength in commercial environments.
  • Finishes: 10B (613), AB (609), BZ (612), PB (605), and S (630).
  • Packaging: Standard shelf pack (box size 4-1/2" x 9-3/4") or display packaging (5-1/4" x 11") - order display version by replacing "CW" with "V" in the item number.

Typical Applications

  • Commercial office buildings
  • Educational facilities
  • Healthcare institutions
  • Retail establishments
  • Multi-tenant residential properties
  • Light commercial interior doors
  • Government and municipal buildings

Manufacturer Resources

DON-JO Wrap-Around Plates

Product Specs

Product Category:
Door Trim and Accessories
Subcategory:
Wrap Arounds
Product Group:
Door Trim and Accessories
Product Subgroup:
Filler Plates, Lock Adapters and Wrap Arounds
Product Type:
Wrap Arounds
Commercial/Residential:
Commercial
Backset (Distance):
2-3/4"
Door Width:
1-3/8"
Cross Bore:
2-1/8"
Product Model:
3 CW
Department:
Door Hardware

Don-Jo 3-S-CW – Frequently Asked Questions

1) Will the Don-Jo 3 CW wrap around fit a 1-3/4 inch door?
No. The 3 CW is built for 1-3/8 inch door thickness only. A wrap around has to match the thickness of the door because it folds over the edge, so a plate cut for 1-3/8 inches will not close on a 1-3/4 inch door. 1-3/4 inch is the standard commercial door thickness and 1-3/8 inch is what you typically find on older interior and light commercial doors, so measure the edge before ordering rather than assuming.
2) My knob has a 2-3/8 inch backset. Can I use the Don-Jo 3 CW?
Not on a 2-3/8 inch backset door. The 2-1/8 inch hole in the 3 CW is punched for a 2-3/4 inch backset, so on a 2-3/8 inch prep the plate's hole sits closer to the door edge than your lock bore and the lockset will not pass through cleanly. 2-3/8 and 2-3/4 inches are the two usual cylindrical backsets. Measure from the door edge to the center of the existing lock hole and match that number to the plate.
3) Does the Don-Jo 3 CW work with a standard cylindrical knob or lever lock?
Yes, that is exactly what it is prepped for. The plate carries a 2-1/8 inch cross bore, which is the standard bore size for a cylindrical knob or lever set, plus a latch prep indent on the wrapped edge so the latch face seats where it should. The lockset comes out, the plate goes over the door edge with the bore lined up, and the lock reinstalls through the plate. Anything mortised, or a lock with a bore other than 2-1/8 inches, needs a different plate.
4) The door around the knob got kicked in and the wood is torn up. Will a Don-Jo 3 CW wrap around cover the damage?
It covers a 4-1/4 inch wide by 9 inch tall area on each face, centered on the lock bore, and it wraps the door edge so the damage at the latch is covered too. That is enough to hide and reinforce a torn up lock area on a 1-3/8 inch door. What it will not fix is a door that has split through the stile or a bore that is blown out so far the lock no longer has anything to clamp to. In that case the door itself is the repair, not the plate.
5) Can I use this wrap around on a door that has a deadbolt above the knob?
The 3 CW only takes care of the knob or lever. It has one 2-1/8 inch hole and stands 9 inches tall, so it wraps the cylindrical lock bore and nothing above it. If you need the deadbolt bore covered by the same plate, you need a taller wrap around drilled for both holes at the correct center to center spacing on your door. The 3 CW can still go on a door with a deadbolt, it just leaves the deadbolt bore uncovered.
6) What finishes does the Don-Jo 3 CW wrap around come in so it matches my existing lever trim?
Five finishes, and each is called out with its BHMA number so you can match what is already on the door: 10B oil rubbed bronze (613), AB antique brass (609), BZ satin bronze (612), PB polished brass (605), and S satin stainless (630). If your levers are 626 satin chrome, the closest of these is the S satin stainless. Match on the number rather than the name, since brass and bronze finishes vary a lot between manufacturers by name alone.
7) Do I have to remove the lockset to install a Don-Jo wrap around plate?
Yes. A wrap around goes over the door edge and sits under the lock, so the knob or lever has to come off, the plate slips on with the 2-1/8 inch hole over the bore and the latch prep indent aligned to the latch, then the lock goes back through the plate. Budget it as a lock removal and reinstall per door, not a stick on repair. On a 1-3/8 inch door the plate seats flush against both faces once it is in place.
8) Is 22 gauge steel heavy enough for a wrap around on a school or office corridor door?
The 3 CW is 22 gauge, .032 inch steel, and Don-Jo rates it for commercial use. That thickness is doing two jobs on a corridor door: spreading the load around a bore that has worn oval, and putting a metal face where knuckles, carts and keys hit the wood. It is a reinforcement and cosmetic plate, not a security astragal or a latch guard, so if your problem is someone prying the latch rather than the door face wearing out, that is a different part.
9) What is the difference between the Don-Jo 3 CW and the 3 V?
Same plate, different packaging. The 3 CW is the standard shelf pack, boxed at 4-1/2 by 9-3/4 inches. Swap the CW for a V in the item number and you get the display packaged version at 5-1/4 by 11 inches, which is what you want if the plate is going on a retail peg or counter rather than into a job box. The steel, the 2-1/8 inch hole, the 2-3/4 inch backset and the finish options are identical between the two.
How fast can I get the Don-Jo 3-S-CW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 3-S-CW come with a warranty?
Absolutely. The Don-Jo 3-S-CW is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 3-S-CW?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 3-S-CW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Product Reviews

  • 5
    A Reliable Solution for Door Protection

    Posted by Brandon on Dec 13th 2023

    I recently got my hands on the Don-Jo 3-CW door wrap-around plate from ZenSupply, and let me tell you, it's a sturdy piece. The steel construction screams durability, providing excellent protection for my door. However, it's worth mentioning that the installation might require additional hardware and some extra effort. Overall, a solid investment for keeping your doors secure!

!