Don-Jo 62 Cast Cabinet Pull — ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.97
Don-Jo 62 Cast Cabinet Pull — 3" CTC, 3-5/16" Overall, 1-11/32" Projection

Don-Jo 62 Cast Cabinet Pull — 3" CTC, 3-5/16" Overall, 1-11/32" Projection

(No reviews yet) Write a Review

Model: 62-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 62 Cast Cabinet Pull — 3" CTC, 3-5/16" Overall, 1-11/32" Projection

The Don-Jo 62 is a cast cabinet pull engineered for residential cabinet hardware applications, offering a clean and durable grip solution for doors and drawers. Featuring a 3" center-to-center (CTC) spacing, a 3-5/16" overall length, and a 1-11/32" projection with 1-1/32" clearance, this pull delivers precise fitment and comfortable hand clearance. The 5/16" diameter barrel and cast construction provide lasting strength and a refined appearance. Available in finishes 605, 625, and 626 to complement a variety of residential cabinetry styles.

Key Features

  • Center-to-Center Spacing: 3" CTC measurement ensures compatibility with standard cabinet boring patterns for straightforward installation.
  • Overall Length: 3-5/16" overall length provides a proportional profile suited to a wide range of cabinet door and drawer sizes.
  • Projection & Clearance: 1-11/32" projection and 1-1/32" clearance deliver comfortable hand access and ergonomic grip for everyday use.
  • Barrel Diameter: 5/16" diameter and 5/16" width offer a slender, refined profile that complements both traditional and contemporary cabinetry.
  • Cast Construction: Solid cast build provides durability and consistent finish quality for long-term residential use.
  • Multiple Finish Options: Available in finishes 605, 625, and 626 to coordinate with existing hardware and cabinetry aesthetics.
  • ANSI Compliance: Meets ANSI B22011 standards, ensuring reliable performance and dimensional accuracy.

Certifications & Compliance

  • ANSI B22011 Compliant

Technical Specifications

  • Product Group: Cabinet Hardware
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Cabinet Knobs and Pulls
  • Product Type: Cabinet Pulls
  • Commercial/Residential: Residential
  • Product Model: 62
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinetry
  • Bathroom Vanity Drawers and Doors
  • Bedroom Furniture and Dressers
  • Home Office Storage Cabinets
  • Laundry Room Cabinetry
  • Built-In Shelving and Storage Units
  • Light-Duty Residential Millwork

Why Don-Jo 62?

Don-Jo cabinet pulls are crafted from solid cast material to deliver consistent dimensional accuracy and finish quality that meets ANSI B22011 standards. The Model 62 is designed for residential environments where reliable everyday performance and aesthetic versatility are equally important. With three available finishes and precise 3" CTC spacing, this pull integrates seamlessly into standard cabinetry for a polished, professional result.

Product Specs

Product Group:
Cabinet Hardware
Subcategory:
Pulls and Push Plates
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Commercial/Residential:
Residential
Product Model:
62
Product Category:
Cabinet Hardware
Department:
Door Hardware

Don-Jo 62-626 – Frequently Asked Questions

1) I need a 4-inch center-to-center cabinet pull instead of 3-inch. What should I look at?
The Don-Jo 62 is a 3 inch CTC pull only, so it will not land on 4 inch holes. For 4 inch spacing the Omnia 1968/102 is a forged solid brass modern pull at 4 inch center-to-center, and the Trimco 562 Series drawer pulls are offered in 3-1/2 inch, 4 inch, and 96mm CTC. The Schaub 10011 Sabre edge pull is also 4 inch CTC if you want an edge-mount rather than a face-mount bar.
2) What is the closest 3 inch center-to-center drawer pull to the Don-Jo 62?
The Trimco 553 series drawer pulls are also built on 3 inch center-to-center spacing, which is the same boring pattern the Don-Jo 62 uses, so existing 3 inch holes accept either without redrilling. The Don-Jo 62 is a cast pull with a 3-5/16 inch overall length, 1-11/32 inch projection and 1-1/32 inch clearance, offered in 605 polished brass, 625 polished chrome and 626 satin chrome. The Trimco is identified by its 553 series designation rather than by those dimensions, so confirm the projection and finish you need when matching a run of drawers.
3) I need a wider grip than 3 inch centers for large drawer fronts - what should I use instead of the Don-Jo 62?
The Don-Jo 62 is fixed at 3 inch center-to-center with a 3-5/16 inch overall length, which suits smaller doors and drawers. For wider fronts, the Trimco 562 series is offered in 3-1/2 inch, 4 inch and 96mm center-to-center, and the Omnia 1968/102 is a forged solid brass pull on 4 inch center-to-center spacing. Either requires a new bore pattern, so plan for drilling if you are converting from a 3 inch layout.
4) Can I use a Schaub Sabre 10010 in place of the Don-Jo 62 since both are 3 inch center-to-center?
They share the 3 inch center-to-center dimension but they are not interchangeable in use. The Schaub 10010 Sabre is an edge pull in solid brass, meant to be grasped at the edge of a door or drawer front, while the Don-Jo 62 is a conventional cabinet pull with a 1-11/32 inch projection and 1-1/32 inch clearance that stands off the face for a full hand grip. If you are replacing a face-mounted pull, the Schaub 10011 at 4 inch and 10012 at 5 inch center-to-center are the same edge-pull style and equally not a drop-in for it.
5) What finishes does the Don-Jo 62 cabinet pull come in?
Three: polished brass (605), polished chrome (625), and satin chrome (626). If you are matching existing hardware in a unit, 625 and 626 are the two to watch, they are the same chrome plating with a bright versus brushed surface, and they will not blend with each other on the same run of cabinets. Pick one and carry it across the whole kitchen.
6) Is the Don-Jo 62 pull heavy enough for apartment turns and rental cabinetry?
It is a cast pull rated by Don-Jo for residential use, and cast construction holds up better than stamped or tubular hardware on repeated daily pulls. For a property manager doing multi-family turns it is a reasonable standard-spec item: one CTC dimension, three finishes, and a slim 5/16 inch barrel profile that suits both traditional and flat-panel doors. For a commercial appliance or heavy drawer application you want something larger, such as the Schaub 79-8 Steamworks 8 inch appliance pull.
7) Is the Don-Jo 62 solid brass, and what is the alternative if my spec calls for forged brass?
The Don-Jo 62 is a cast pull with a 5/16 inch diameter barrel, meeting ANSI B22011, and comes in 605 polished brass, 625 polished chrome and 626 satin chrome. If a job specifies forged solid brass instead of cast, the Omnia 1969, 1970 and 1971 modern cabinet pulls are forged solid brass, with 1-3/16 inch projection on the 1969 and 1971 and 1-1/4 inch on the 1970 - close to the 1-11/32 inch projection of the Don-Jo 62. The Deltana SBP35 modern square bar pull is another heavy-duty solid brass option at 3-1/2 inches.
8) Is there a single-hole option instead of the two-hole Don-Jo 62 for small cabinet doors?
The Don-Jo 62 mounts on two holes at 3 inch center-to-center. If the door only has one bore, the Orca Hardware Bachelor Collection round cabinet knob CK-15030 and the ring knob CK-16030 are both 1-1/4 inch diameter knobs, and the Blackcomb CK-17025 is a 25mm square knob. A knob changes the appearance of a run, so match it across the whole kitchen rather than mixing with the 62.
9) What standard does the Don-Jo 62 cabinet pull meet?
It is built to ANSI B22011. For a spec-driven job that is the dimensional-accuracy reference behind the 3 inch CTC and the stated projection, so the pulls you receive on a later reorder will match the ones already installed.
10) Can I use the Don-Jo 62 on both drawers and cabinet doors?
Yes, it is drilled the same either way. At 3-5/16 inch overall it is proportioned for standard vanity drawers, base cabinet doors, and upper doors rather than for wide appliance panels or deep pot drawers, where a longer pull reads better and gives a two-hand grip. Typical uses are kitchen cabinetry, bath vanities, laundry and home office storage, and built-in shelving.
11) Is the Don-Jo 62 a knob or a bar pull?
It is a two-screw bar pull, not a knob. The grip spans 3 inch between fasteners on a 5/16 inch barrel. If you actually want a single-screw knob, the Orca Hardware Bachelor Collection round knob is 1-1/4 inch diameter and the Blackcomb square knob is 25mm, both single-point mount, which means a different hole pattern than the 62.
12) My client wants a decorative cabinet pull rather than the plain Don-Jo 62 - what are the options?
The Don-Jo 62 is a plain cast pull with a 5/16 inch barrel diameter and 5/16 inch width, a slender profile intended to read as neutral. For a more styled look, Emtek's Schaub Collection offers the Alexander, Art Deco and Bar cabinet pulls, plus the Emtek 8405 from the SELECT series, all designated as cabinet knob/pull hardware. Confirm the center-to-center on the style you choose, since the 62 is fixed at 3 inches.
How fast can I get the Don-Jo 62-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 62-626 come with a warranty?
Absolutely. The Don-Jo 62-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 62-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 62-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!