Don-Jo 66 Cabinet Pull Cast 4"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.16
$6.97
Don-Jo 66 Cabinet Pull Cast 4" CTC 4-5/16" Overall Length

Don-Jo 66 Cabinet Pull Cast 4" CTC 4-5/16" Overall Length

(No reviews yet) Write a Review

Model: 66-626
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.16
$6.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 66 Cabinet Pull — Cast, 4" Center-to-Center, 4-5/16" Overall Length

The Don-Jo 66 Cabinet Pull is a cast residential cabinet pull offering a clean, classic profile with a 4" center-to-center (CTC) spacing and a 4-5/16" overall length. With a 5/16" diameter and 5/16" width, this pull delivers a refined, low-profile grip suited for cabinet doors and drawers throughout the home. Available in multiple finishes including 605, 625, and 626, the Don-Jo 66 integrates seamlessly into a variety of residential interior styles.

Key Features

  • Precise Center-to-Center Spacing: 4" CTC measurement ensures straightforward, accurate installation on standard cabinet door and drawer configurations.
  • Compact Overall Dimensions: 4-5/16" overall length with a 5/16" diameter and 5/16" width provides a sleek, low-profile appearance on cabinetry.
  • Cast Construction: Manufactured using a cast process for consistent shape, solid feel, and lasting durability in everyday residential use.
  • Multiple Finish Options: Available in finishes 605, 625, and 626 to coordinate with a wide range of cabinet hardware and interior design schemes.
  • Residential-Grade Design: Engineered specifically for residential cabinet hardware applications, balancing aesthetics with reliable everyday performance.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1) for flexible purchasing to match exact project quantities.

Certifications & Compliance

  • ANSI: B22011

Technical Specifications

  • Product Group: Cabinet Hardware
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Cabinet Knobs and Pulls
  • Product Type: Cabinet Pulls
  • Commercial/Residential: Residential
  • Product Model: 66
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinetry
  • Bathroom Vanity Cabinets
  • Bedroom Dresser and Wardrobe Drawers
  • Home Office Storage Cabinets
  • Laundry Room Cabinetry
  • Built-In Shelving and Storage Units
  • Multi-Unit Residential Renovation Projects

Why Don-Jo 66?

Don-Jo cabinet pulls are crafted with cast construction to deliver consistent quality and a solid, dependable feel in residential settings. The 66 model's precise 4" CTC and 4-5/16" overall dimensions make it a reliable choice for homeowners and contractors seeking a well-proportioned, ANSI B22011-compliant pull that installs cleanly and performs dependably over time.

Product Specs

Product Group:
Cabinet Hardware
Subcategory:
Pulls and Push Plates
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Commercial/Residential:
Residential
Product Model:
66
Product Category:
Cabinet Hardware
Department:
Door Hardware

Don-Jo 66-626 – Frequently Asked Questions

1) Will the Don-Jo 66 cabinet pull cover the existing holes on my cabinet doors?
Only if your existing holes are drilled 4 inches apart. The Don-Jo 66 is a fixed 4 inch center-to-center pull, so it drops onto cabinet doors and drawer fronts already bored at 4 inch centers and will not span a 3 inch or 3-1/2 inch pattern. Measure hole center to hole center before ordering. If your cabinets are on 3 inch centers, the Trimco 553 Series drawer pull is a 3 inch CTC option, and the Trimco 562 Series covers 3-1/2 inch, 4 inch, and 96mm centers.
2) How much wider than the hole spacing is the Don-Jo 66 pull?
The 66 runs 4-5/16 inches overall against its 4 inch centers, so it extends about 5/32 of an inch past each screw hole. That matters on narrow drawer fronts and on cabinet doors where the pull sits close to a stile or a neighboring door. The bar itself is 5/16 inch diameter and 5/16 inch wide, so it stays a slim profile against the face.
3) What finishes does the Don-Jo 66 cabinet pull come in?
Three: 605 polished brass, 625 polished chrome, and 626 satin chrome. Those are standard BHMA finish numbers, so 626 satin chrome will read the same as satin chrome on your existing lever trim or hinges, and 625 gives you the bright chrome match. There is no oil-rubbed bronze or black option in the 66.
4) Is the Don-Jo 66 pull rated for commercial cabinetry or apartment turns?
Don-Jo lists the 66 as a residential pull, and it is built cast rather than as a heavy commercial pull. For apartment unit kitchens, vanities, and multi-unit renovation work it is in its intended use. For a high-traffic commercial casework job, a heavy-duty solid brass pull like the Deltana SBP35 modern square bar pull is the direction to look.
5) Is the Don-Jo 66 a knob or a bar pull?
It is a two-screw bar pull, not a knob. The 66 mounts on two holes at 4 inch centers with a 5/16 inch diameter grip bar between them. If you want a single-screw knob instead, the Orca Hardware Bachelor Collection round cabinet knob is a 1-1/4 inch diameter knob, and the Blackcomb Collection square knob is 25mm.
6) What is a 4 inch center-to-center solid brass alternative to the Don-Jo 66?
The Omnia 1968/102 is a forged solid brass modern cabinet pull at the same 4 inch center-to-center spacing, so it lands on the same hole pattern with a different construction and look. Within Omnia's modern pull line the 1969 and 1971 carry a 1-3/16 inch projection and the 1970 a 1-1/4 inch projection, which is worth checking if knuckle clearance in a tight galley matters to you.
7) Can I use the Don-Jo 66 on a refrigerator panel or an appliance door?
No. At 4-5/16 inches overall the 66 is sized for cabinet doors and drawer fronts, not appliance fronts, which take a long grip pull. For a panel-ready appliance the Schaub 79-8 Steamworks is an 8 inch appliance pull.
8) I need a flush pull for a sliding cabinet door. Is the Don-Jo 66 what I want?
No. The 66 is a surface-mounted bar pull that stands proud of the face, so it will foul a bypass or pocket door. For a recessed application look at the Schaub Sabre edge pull line, offered at 3 inch (10010), 4 inch (10011), and 5 inch (10012) center to center.
9) Do I get mounting screws with the Don-Jo 66 cabinet pull, and how many pulls per order?
The 66 is sold individually, one pull per shelf pack, so order one per door or drawer front and count your openings before you buy. Screw length is the thing to check on your own cabinets, since face frame doors and thicker drawer fronts often need a longer machine screw than a standard 8-32 that ships with cabinet hardware.
10) Does the Don-Jo 66 meet ANSI B22011?
Yes, the 66 cabinet pull is listed to ANSI B22011.
How fast can I get the Don-Jo 66-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 66-626 come with a warranty?
Absolutely. The Don-Jo 66-626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 66-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 66-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!