Don-Jo 7011 Pull Plate with Ro...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$38.96
$35.47
Don-Jo 7011 Pull Plate with Round Pull — 15" x 3-1/2" Commercial Door Trim

Don-Jo 7011 Pull Plate with Round Pull — 15" x 3-1/2" Commercial Door Trim

(No reviews yet) Write a Review

Model: 7011-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$38.96
$35.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 7011 Pull Plate with Round Pull — 15" x 3-1/2" Commercial Door Trim

The Don-Jo 7011 Pull Plate with Round Pull is a commercial-grade door trim accessory designed to provide a clean, professional appearance and reliable functionality on high-traffic doors. Measuring 15" in length and 3-1/2" in width, the 7011 features a round pull with a 5/8" diameter, 2" projection, 5-1/2" center-to-center spacing, and 1-3/8" clearance, conforming to ANSI J405 standards. Available in six finishes — 605, 606, 613, 628, 629, and 630 — this pull plate integrates seamlessly into a wide range of commercial door applications.

Key Features

  • Plate Dimensions: 15" length x 3-1/2" width provides a substantial, professional-grade mounting surface suited for commercial door applications.
  • Round Pull Specifications: Features a 5/8" diameter round pull with 2" projection and 1-3/8" clearance for comfortable, ergonomic grip.
  • Center-to-Center Spacing: 5-1/2" CTC measurement ensures compatibility with standard commercial door preparations and mounting configurations.
  • ANSI J405 Compliance: Meets ANSI J405 standards, confirming dimensional and performance conformance for commercial door hardware applications.
  • Versatile Finish Options: Available in six finishes — 605, 606, 613, 628, 629, and 630 — to coordinate with a wide variety of door hardware and architectural styles.
  • Commercial-Grade Construction: Engineered for demanding commercial environments where durability and consistent performance are essential.
  • Broad Model Family: Part of an extensive pull plate family (models 7011–7120) offering varied dimensions, projections, diameters, and CTC spacings to suit diverse door configurations.

Certifications & Compliance

  • ANSI J405 Compliant
  • Commercial Application Rated

Technical Specifications

  • Subcategory: Pulls and Push Plates
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 7011?

Don-Jo Pull Plate products deliver professional-grade reliability through ANSI J405-compliant construction and a broad selection of finishes designed to meet the demands of commercial door hardware installations. The 7011 model's precise dimensional specifications — including 15" x 3-1/2" plate size, 5/8" round pull diameter, and 5-1/2" CTC spacing — make it a dependable choice for architects, contractors, and facility managers seeking consistent, high-quality door trim solutions.

Product Specs

Subcategory:
Pulls and Push Plates
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 7011-628 – Frequently Asked Questions

1) Will the Don-Jo 7011 pull plate cover the holes left by my old pull?
That depends on the hole spacing. The 7011 pull plate is 15 inches long by 3-1/2 inches wide with the pull mounted on 5-1/2 inch centers, so it covers the door face in that footprint and puts fasteners at 5-1/2 inch CTC. If the pull you are removing was on 5-1/2 inch centers, the prep lines up. If your existing prep is 5 inch centers, the Trimco 1010 Series cast pull plate uses 5 inch CTC, and for wider prep the Ives 8303 is offered with 8 inch or 10 inch center-to-center mounting. A 3-1/2 inch wide plate will not hide holes that fall outside that width.
2) How much hand clearance does the Don-Jo 7011 round pull give behind the grip?
1-3/8 inches of clearance between the pull and the plate, with a 2 inch total projection off the door face and a 5/8 inch diameter round grip. That is enough room for a gloved hand, which is what matters on service corridors and back-of-house doors. The 2 inch projection is also the number to check against anything mounted near the door, such as a wall, a return, or an adjacent leaf on a pair.
3) Will a 3-1/2 inch wide pull plate fit a narrow stile aluminum storefront door?
Check the stile before you order. The 7011 plate is 3-1/2 inches wide, so the door stile has to be at least that wide with clearance to the glass stop and to any lock or exit device mounted in the same stile. Standard narrow stile storefront is roughly 2 to 2-1/2 inches of face, which is too narrow for a 3-1/2 inch plate; medium and wide stile doors take it. On a Detex Value Series exit device opening, Detex makes its own P/PN Series pull plate sized for that device rather than a generic plate.
4) What is the closest equivalent to the Don-Jo 7011 pull plate from another brand?
The Trimco 1013 is the nearest match in intent: it is a round heavy duty pull plate with a 5.5 inch center-to-center pull, the same CTC the Don-Jo 7011 uses with its 5/8 inch diameter round pull on a 15 inch by 3-1/2 inch plate. Both put a round grip on the same hole spacing, so a door prepped for one takes the other's pull spacing. The Trimco 1012 is also a 5.5 inch CTC heavy duty pull plate, but its pull is cast tapered rather than round, so the grip profile changes even though the spacing matches.
5) The doors take a lot of abuse - is there a heavier pull plate than the Don-Jo 7011?
Yes. The Ives 8302 is a heavy duty pull plate with through bolt mounting, which anchors the pull through the door rather than relying on the plate fasteners alone - the usual answer for entrances that get pulled hard all day. The Ives 8303 is also heavy duty and is built with 8 inch or 10 inch center-to-center mounting, a wider grip than the 5-1/2 inch CTC on the Don-Jo 7011, so it needs its own door prep. Trimco's 1010, 1012 and 1013 pull plates are likewise heavy duty.
6) Will a push plate work in place of the Don-Jo 7011?
No - they are different halves of the same job. The Don-Jo 7011 carries a round pull with a 2 inch projection and 1-3/8 inch clearance so a hand can wrap it and pull. A push plate such as the Delaney 3-1/2 inch by 15 inch push plate is a flat plate with no pull to grab; it protects the face of the door on the push side. The Emtek Knoxville, Modern and Petal families are sold as push and pull plates so both halves come from one series if you are trimming both sides of a door.
7) My door has an exit device on it - can I use the Don-Jo 7011 as the outside pull?
Check what the exit device expects first. Detex builds the P/PN series pull plate specifically for its Value Series exit devices, so on those openings the trim is matched to the device rather than chosen as a general pull plate. The Don-Jo 7011 is a standalone commercial door trim pull plate, 15 inch by 3-1/2 inch with a 5-1/2 inch CTC round pull, and mounts to the door on its own prep rather than to a device chassis.
8) The existing doors are drilled for a 5 inch center pull - does the Don-Jo 7011 fit that prep?
Not without redrilling. The Don-Jo 7011 pull is spaced 5-1/2 inch center to center. For a 5 inch CTC prep, the Trimco 1010 series cast pull plate is built to 5 inch CTC and is heavy duty. If the opening is drilled wider still, the Trimco 1014 half-round pull plate uses a 6 inch CTC pull, and the Ives 8303 is offered in 8 inch or 10 inch center-to-center mounting.
9) Is a pull plate or a separate pull the right call for a push/pull door?
A pull plate combines the grip and the face plate in one piece, so the Don-Jo 7011 protects the door face around the grip and covers old fastener holes at the same time. A bare pull leaves the door face exposed to knuckles and cart traffic. On a push/pull opening you normally run the pull plate on the pull side and a plain push plate on the push side; Delaney offers a matching 3-1/2 inch by 15 inch push plate to pair with a 3-1/2 inch by 15 inch pull plate if you want the two faces sized alike.
10) Does the Don-Jo 7011 pull plate meet ANSI J405?
Yes. The 7011 conforms to ANSI J405, the pull plate designation, which is the line a spec writer or institutional buyer usually needs matched on a hardware schedule. If your drawing calls out J405 pull plates, the 7011 answers it at 15 by 3-1/2 inches with 5-1/2 inch CTC.
11) I need to standardize pull plates across a whole building. Can I get other sizes and pull spacings in the same family?
Yes. The 7011 sits in the Don-Jo pull plate family running models 7011 through 7120, which vary plate dimensions, pull projection, pull diameter and center-to-center spacing. That lets you keep one manufacturer and one look across a facility while sizing each opening to its own stile and prep. The 7011 itself is the 15 by 3-1/2 inch plate with a 5/8 inch round pull on 5-1/2 inch centers.
12) Is the Don-Jo 7011 pull plate through-bolted, and what should I use on an abusive door?
On a door taking cart strikes, kicked-open traffic or vandalism, through bolting is what keeps a pull on the door, and the Ives 8302 is a heavy duty pull plate specifically offered with through bolt mounting. The Don-Jo 7011 is a commercial-grade plate at 15 by 3-1/2 inches with a 5/8 inch round pull, and it suits offices, retail, schools and multi-tenant residential openings. If the opening is a loading dock or a known abuse point, step up to a heavy duty plate such as the Ives 8302 or the Trimco 1013.
13) I need a pull plate in the same 3-1/2 by 15 inch size but simpler - what else is there?
The Delaney 4900 series is a 3-1/2 inch by 15 inch door pull plate, the same plate footprint as the Don-Jo 7011's 15 inch by 3-1/2 inch body. Delaney also builds the same footprint as the 4905 series push plate, which is the flat plate with no pull on it - that is the one to order for the push side of a pair. If the opening wants a larger plate, Delaney runs both a 4 inch by 16 inch pull plate and a 4 inch by 16 inch push plate in the same style.
14) The architect wants a decorative pull plate instead of a plain commercial one - what are the options?
Emtek runs three push and pull plate designs: Knoxville, Modern, and the Lost Wax Cast Bronze Petal series. Those are styled families intended to carry a look through the opening. The Don-Jo 7011 goes the other direction - a commercial door trim plate conforming to ANSI J405, offered in 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum and 630 satin stainless steel, so it coordinates by finish rather than by ornament.
15) What is the difference between the Don-Jo 7011 and the Trimco 1014?
Grip shape and spacing. The Don-Jo 7011 uses a round pull, 5/8 inch in diameter, on a 5-1/2 inch center-to-center spacing. The Trimco 1014 series is a half-round pull plate on a 6 inch center-to-center pull, so the hand meets a flat-backed profile and the mounting holes sit half an inch further apart. Trimco's own round-pull equivalent at 5.5 inch CTC is the 1013.
16) What finishes does the Don-Jo 7011 pull plate come in, and which holds up best in a public entry?
Six finishes are catalogued for the 7011: 605 polished brass, 606 satin brass, 613 oil rubbed bronze, 628 satin aluminum, 629 polished stainless, and 630 satin stainless. For a high-traffic public entry, 630 satin stainless and 628 satin aluminum hide handprints and scuffing better than the polished options, which is why they are the usual pick in schools, hospitals and offices. 613 oil rubbed bronze is a living finish and will change appearance where hands touch it.
17) Is the Don-Jo 7011 pull plate suitable for a residential front door?
It is built for commercial openings, not residential ones. The 7011 is a plain 15 by 3-1/2 inch plate with a 5/8 inch round pull, styled for office, healthcare, school, retail and government doors. For a house or a decorative interior door, the Emtek push and pull plate lines are the ones to look at: Knoxville, Modern, and the lost wax cast bronze Petal.
How fast can I get the Don-Jo 7011-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 7011-628 come with a warranty?
Absolutely. The Don-Jo 7011-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 7011-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 7011-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!