Don-Jo 7030 Pull Plate with Fl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$52.40
$50.14
Don-Jo 7030 Pull Plate with Flat Pulls, 15" x 3-1/2", 2" Projection, 1-5/8" Clearance

Don-Jo 7030 Pull Plate with Flat Pulls, 15" x 3-1/2", 2" Projection, 1-5/8" Clearance

(No reviews yet) Write a Review

Model: 7030-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$52.40
$50.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 7030 Pull Plate with Flat Pulls, 15" x 3-1/2", 2" Projection, 1-5/8" Clearance

The Don-Jo 7030 Pull Plate with Flat Pulls is a commercial-grade door trim accessory designed to provide a clean, functional pull solution for high-traffic entryways. Measuring 15" in length by 3-1/2" in width, this pull plate features a flat pull with a 3/8" x 1-1/4" diameter, a 2" projection, and 1-5/8" clearance, with a 6" center-to-center (CTC) spacing. Compliant with ANSI J405, the 7030 is available in multiple finishes including 605, 613, 628, and 630 to suit a variety of architectural and design requirements.

Key Features

  • Plate Dimensions: 15" length by 3-1/2" width provides a substantial mounting surface suitable for commercial door applications.
  • Flat Pull Specifications: Pull diameter of 3/8" x 1-1/4" with a 2" projection and 1-5/8" clearance for comfortable, ergonomic grip.
  • Center-to-Center Spacing: 6" CTC mounting configuration (model 7030) for precise and secure installation alignment.
  • Multiple Finish Options: Available in finishes 605, 613, 628, and 630 to coordinate with existing door hardware and architectural aesthetics.
  • ANSI J405 Compliance: Meets ANSI J405 standards, ensuring consistent quality and dimensional accuracy for commercial applications.
  • Commercial-Grade Construction: Engineered for demanding commercial environments where durability and long-term performance are essential.
  • Related Model Available: The companion model 7031 offers the same 15" x 3-1/2" plate with 2" projection, 1-5/8" clearance, and 3/8" x 1-1/4" diameter pull, but with an 8" CTC spacing for alternate mounting requirements.

Certifications & Compliance

  • ANSI J405 Compliant
  • Commercial Grade

Technical Specifications

  • Subcategory: Pulls and Push Plates
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 7030?

Don-Jo Pull Plate products deliver professional-grade reliability with ANSI J405-compliant construction and a broad selection of finishes engineered to meet the demands of commercial door hardware applications. The 7030 model is purpose-built for high-traffic environments where consistent performance, dimensional precision, and aesthetic versatility are equally important.

Product Specs

Subcategory:
Pulls and Push Plates
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Model:
7030
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 7030-628 – Frequently Asked Questions

1) What is the center-to-center spacing on the Don-Jo 7030 pull plate, and will it line up with my existing pull holes?
The 7030 pull is set at 6 inch center-to-center on a 15 by 3-1/2 inch plate. If the door you're replacing was drilled for 8 inch CTC, the 7030 won't cover the old holes correctly on the pull mounting; Don-Jo's 7031 is the same 15 by 3-1/2 inch plate with the same 2 inch projection and 1-5/8 inch clearance but an 8 inch CTC pull. Match the CTC before you pull the old plate off, because the plate face is what hides the previous prep.
2) Does the Don-Jo 7030 pull plate meet ANSI J405?
Yes, the 7030 is ANSI J405 compliant. That is the door trim designation an architect or spec writer will call out on a schedule for a pull plate, so it can go in against a J405 line without substitution paperwork.
3) Do I need a push plate to go with the Don-Jo 7030 pull plate?
The 7030 is the pull side only, mounted on the pull face of the door. A pull/push pair is the normal arrangement on a commercial opening, so you order a push plate separately for the opposite face. Delaney offers a 3-1/2 by 15 inch push plate that matches the 7030's plate footprint, and a 4 by 16 inch push plate if you want a larger face. Emtek's Knoxville, Modern, and Petal lines are sold as push and pull plate sets if you want both faces from one design family.
4) Can I use the Don-Jo 7030 on a narrow stile aluminum storefront door?
The plate is 3-1/2 inches wide by 15 inches long, and a narrow stile aluminum door typically has around 2 to 3-1/2 inches of stile face to work with, so the 7030 is tight to impossible on a true narrow stile. Measure the flat stile face first. Where the stile is genuinely narrow, an offset or straight door pull sized to the stile is the right part rather than a full pull plate. On medium and wide stile aluminum doors, the 628 satin aluminum finish is the match to the anodized frame.
5) I need a pull plate with wider center-to-center spacing than 6 inches for a hand-over-hand grip. What are my options?
The Don-Jo 7030 uses 6 inch center-to-center spacing, and the companion Don-Jo 7031 keeps the same 15 inch by 3-1/2 inch plate, 2 inch projection and 1-5/8 inch clearance but moves to 8 inch CTC. Outside Don-Jo, the Ives 8303 heavy duty pull plate is offered with 8 inch or 10 inch center-to-center mounting. For a shorter grip, the Trimco 1010 uses a 5 inch CTC pull and the Trimco 1012 and 1013 both use 5.5 inch CTC.
6) What should I specify instead of the Don-Jo 7030 for a heavy abuse opening where the pull gets pried on?
The Ives 8302 pull plate is a heavy duty unit with through bolt mounting, which carries the pull load to the opposite door face rather than into screws in the plate alone. The Ives 8303 is likewise heavy duty and comes in 8 inch or 10 inch center-to-center. Trimco's cast pull plates are also rated heavy duty, including the 1010 with a 5 inch CTC pull, the 1012 cast tapered with 5.5 inch CTC and the 1013 round with 5.5 inch CTC. The Don-Jo 7030 is a commercial pull plate compliant with ANSI J405.
7) What is the closest equivalent to the Don-Jo 7030 pull plate in the same 3-1/2 by 15 inch plate size?
The Delaney 3-1/2" x 15" Door Pull Plate matches the Don-Jo 7030's 15 inch by 3-1/2 inch plate footprint, so it covers the same cutout of door face and the same visual proportion on the stile. The Don-Jo 7030 carries a flat pull with 6 inch center-to-center spacing, a 2 inch projection and 1-5/8 inch clearance. If an existing 3-1/2 by 15 plate is being replaced and the fastener pattern is being redrilled anyway, either plate suits the same opening.
8) Is a push plate the same thing as the Don-Jo 7030?
No. The Don-Jo 7030 is a plate with a flat pull standing off the face, 2 inch projection and 1-5/8 inch clearance, so a hand wraps behind it to pull the door open. A push plate such as the Delaney 3-1/2" x 15" Push Plate is a flat sheet with nothing to grip, meant for the swing side where the door is pushed. On a single-swing door the two are ordered as a pair, one leaf face each, and they are not interchangeable.
9) The existing plates on our doors are 4 by 16 inches. Will the Don-Jo 7030 cover the same area?
No, the Don-Jo 7030 plate is 15 inches long by 3-1/2 inches wide, so it sits half an inch narrower and an inch shorter than a 4 by 16 plate and will leave the old fastener holes and any paint shadow exposed. For a like-for-like cover on that opening, the Delaney 4" x 16" Door Pull Plate is the matching size, with the Delaney 4" x 16" Push Plate for the push face.
10) How much hand clearance does the Don-Jo 7030 pull give behind the grip?
1-5/8 inches of clearance behind the pull, with a 2 inch total projection off the face of the door. The grip itself is a flat pull, 3/8 by 1-1/4 inch in section. That 1-5/8 inch gap is what decides whether a gloved hand or a work glove clears the plate on an industrial or warehouse opening.
11) What finishes does the Don-Jo 7030 pull plate come in, and which one matches my other door hardware?
Four finishes: 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel. For a fleet of commercial openings, 630 satin stainless is the usual match to lever sets and push plates already spec'd in 630, and 628 satin aluminum pairs with aluminum storefront and anodized frames. 613 is the dark bronze look, 605 the bright brass.
12) What is the difference between the Don-Jo 7030 and the Trimco cast pull plates?
Grip shape and spacing are what separate them. The 7030 uses a flat pull, 3/8 by 1-1/4 inch in section, on 6 inch centers. Trimco's 1010 Series is a cast pull plate at 5 inch CTC, the 1012 is a cast tapered pull at 5.5 inch CTC, the 1013 is a round pull at 5.5 inch CTC, and the 1014 is a half-round pull at 6 inch CTC. If you're matching an existing 6 inch prep, the 7030 and the Trimco 1014 are the two that land on those centers; the round and tapered Trimco profiles are a different hand feel and a different look.
13) Will the Don-Jo 7030 pull plate work on a door with an exit device already on it?
The 7030 is a standalone pull plate for the pull face of a door, not device trim. If the opening has a value-series exit device and you need a pull that mounts to the device itself, the Detex P/PN Series pull plate is built as trim for Detex Value Series exit devices. On a door where the exit device is on the egress side and the pull side is bare, the 7030 mounts normally, but you need enough clear stile to take the 15 by 3-1/2 inch plate.
14) I'm standardizing pull plates across a whole building. Is the Don-Jo 7030 a good fleet choice?
For a fleet, the 7030 gives you one plate size at 15 by 3-1/2 inches and one grip spacing at 6 inch CTC across four finishes, so you can hold a single part per finish and cover every pull-side opening that has the stile for it. Where a door was previously prepped at 8 inch centers, the 7031 keeps the same plate and projection so the doors still look identical down the corridor. It's specified for commercial use, and ANSI J405 compliance means it drops in against a spec'd line without a substitution request.
15) The Don-Jo 7030 looks too plain for a decorative entrance. What else gives the same push and pull function?
Emtek offers push and pull plate sets in decorative patterns: the Knoxville, the Modern, and the Lost Wax Cast Bronze Petal. Those are styled sets covering the same push face and pull face duty. The Don-Jo 7030 is a commercial pull plate with a plain flat pull, ANSI J405 compliant, sold in 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum and 630 satin stainless steel, so it can also be tuned to an architectural finish schedule without changing pattern.
16) I have a plate already drilled on 6 inch centers. Which pull plates keep that spacing?
The Don-Jo 7030 uses 6 inch center-to-center spacing on a 15 by 3-1/2 inch plate with a 2 inch projection and 1-5/8 inch clearance. The Trimco 1014 half-round pull plate also uses a 6 inch CTC pull. Both hold the same grip spacing, which matters when the door already has a pattern in it and redrilling a second set of holes is not wanted.
How fast can I get the Don-Jo 7030-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 7030-628 come with a warranty?
Absolutely. The Don-Jo 7030-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 7030-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 7030-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!