Don-Jo 7110 Pull Plate, 16" Le...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$49.16
$39.69
Don-Jo 7110 Pull Plate, 16" Length, 4" Width, 1-3/4" Projection, 5-1/2" CTC for Commercial Doors

Don-Jo 7110 Pull Plate, 16" Length, 4" Width, 1-3/4" Projection, 5-1/2" CTC for Commercial Doors

(No reviews yet) Write a Review

Model: 7110-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$49.16
$39.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo 7110 Pull Plate, 16" Length, 4" Width, 1-3/4" Projection, 5-1/2" CTC for Commercial Doors

The Don-Jo 7110 Pull Plate is a commercial-grade door trim accessory engineered for professional installations requiring precise dimensions and a clean, durable finish. Measuring 16" in length and 4" in width with a 1-3/4" projection and 5-1/2" center-to-center (CTC) spacing, this pull plate meets ANSI J405 standards and is available in multiple finishes including 605, 613, 628, and 630 to complement a wide range of door hardware configurations.

Key Features

  • Precise Dimensions: 16" length and 4" width provide a substantial, professional appearance suited for commercial door applications.
  • Accurate Projection & CTC: 1-3/4" projection and 5-1/2" center-to-center spacing ensure compatibility with standard commercial door preparations and mounting requirements.
  • Multiple Finish Options: Available in finishes 605, 613, 628, and 630 to coordinate with existing door hardware and architectural aesthetics.
  • ANSI J405 Compliant: Meets ANSI J405 standards, confirming suitability for commercial-grade door trim applications.
  • Commercial-Grade Construction: Designed and rated for commercial use, delivering the durability and reliability required in high-traffic environments.
  • Convenient Shelf Pack: Sold individually (shelf pack of 1) for straightforward procurement and inventory management.

Certifications & Compliance

  • ANSI J405 Compliant
  • Commercial-Grade Rated

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Subcategory: Pulls and Push Plates
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo 7110?

Don-Jo 7110 Pull Plates are built to ANSI J405 standards, ensuring consistent quality and dimensional accuracy for professional commercial door hardware installations. With a robust selection of finishes and precise 16" x 4" dimensions, the 7110 delivers the reliability and aesthetic flexibility that demanding commercial environments require.

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Model:
7110
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo 7110-628 – Frequently Asked Questions

1) What size is the Don-Jo 7110 plate, and how far does the pull stand off the door?
The plate is 16 inches long by 4 inches wide, and the pull projects 1-3/4 inches off the face. That projection is what decides clearance: on a door that swings into a tight vestibule or beside a wall return, measure 1-3/4 inches plus your hand before you commit. The 4 inch width also needs a stile at least that wide with room for the plate to sit flat, so it is not a narrow-stile aluminum storefront part.
2) Does the Don-Jo 7110 meet a recognized pull plate standard for a spec job?
It is built to ANSI J405, the designation for this pull plate configuration, and it is rated for commercial use rather than residential. If the drawing calls out J405 pull plates, the 7110 answers that line item.
3) What is the closest same-size alternative to the Don-Jo 7110 pull plate in a 4 by 16 inch plate?
The Delaney 4" x 16" Door Pull Plate (DLY-490xx0) carries the same 4 inch by 16 inch plate footprint as the Don-Jo 7110, so it covers the same area of door face and the same existing plate outline. The Don-Jo 7110 is specified with a 1-3/4" projection and 5-1/2" center-to-center pull spacing and is built to ANSI J405 for commercial openings; confirm the Delaney pull's CTC before reusing existing through-bolt holes.
4) Which pull plate matches the 5-1/2 inch center-to-center spacing of the Don-Jo 7110?
Two Trimco cast plates are built on the same 5.5" center-to-center pull spacing: the Trimco 1012 cast tapered heavy duty pull plate and the Trimco 1013 round heavy duty pull plate. Both are heavy duty cast plates, where the 1012 uses a tapered pull section and the 1013 a round pull. The Don-Jo 7110 uses 5-1/2" CTC with a 1-3/4" projection on a 16" by 4" plate, so any of the three will land on the same bolt centers.
5) If the doors on my job need a wider pull grip than the Don-Jo 7110, what should I order instead?
The Don-Jo 7110 is set at 5-1/2" center-to-center. For a wider hand hold, the Ives 8303 heavy duty pull plate is offered in 8" or 10" center-to-center mounting, and the Trimco 1014 half-round pull plate uses a 6" CTC pull. A wider CTC changes the bolt pattern, so it is a new drill on the door rather than a drop-in over the 7110 prep.
6) What finishes does the Don-Jo 7110 pull plate come in?
Four: 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel. For standardizing a building, 630 satin stainless is the usual commercial default and matches most Grade 1 lever and exit device trim; 628 satin aluminum is the one to pick if the openings are clear-anodized aluminum storefront frames.
7) Is the Don-Jo 7110 heavy enough for a high traffic school or hospital entrance?
It is a commercial-grade pull plate and the 16 inch plate spreads the load over a wide area, which is why it is used in schools, healthcare, retail, office and municipal buildings. On an abusive opening where the pull takes vehicle-cart impact, a through-bolted cast pull is the tougher route: the Ives 8302 is a heavy duty pull plate with through-bolt mounting, and Trimco's 1012 and 1013 are cast heavy duty plates that also use 5-1/2 inch CTC.
8) I need a slightly smaller pull plate than 16 x 4 for a narrower stile. What else is there?
Delaney's pull plate in 3-1/2 inch x 15 inch is the closest step down from the Don-Jo 7110's 16 x 4 footprint, with a matching 3-1/2 x 15 push plate for the opposite face. It buys you half an inch of stile width and an inch of height.
9) Can I use a push plate in place of the Don-Jo 7110 pull plate?
No. The Don-Jo 7110 has a pull bar standing 1-3/4" off the plate at 5-1/2" center-to-center, so it is the grip side of the opening. A push plate is a flat plate with no pull, such as the Delaney 4" x 16" Push Plate or the Delaney 3-1/2" x 15" Push Plate. On a push-pull opening you typically order the 7110 for the pull face and a matching flat push plate for the opposite face.
10) Will the Don-Jo 7110 work as the pull trim on an exit device door?
The Don-Jo 7110 is a standalone 16" by 4" commercial pull plate, not device-specific trim. If the opening carries a Detex Value Series exit device, the Detex P/PN Series pull plate is the pull made to pair with those devices. Match the device family first, then use the 7110 on openings where the pull mounts to the door independently.
11) I need a decorative pull plate instead of the plain commercial look of the Don-Jo 7110 - what are the options?
The Don-Jo 7110 is a plain commercial plate offered in 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum and 630 satin stainless. For a decorative face, Emtek offers push and pull plates in the Modern, Knoxville and Petal patterns, the Petal being lost wax cast bronze. Those are styled sets rather than ANSI J405 commercial trim, so verify they suit the traffic level on the opening.
12) For a high-abuse opening, is there a heavier pull plate than the Don-Jo 7110?
The Don-Jo 7110 is a commercial-grade ANSI J405 pull plate. If the opening calls for a heavy duty cast or through-bolted assembly, the Ives 8302 is a heavy duty pull plate with through bolt mounting, the Ives 8303 is heavy duty with 8" or 10" CTC, and the Trimco 1010, 1012 and 1013 are heavy duty cast plates. Through-bolting requires access to both faces of the door, which the 7110's standard commercial prep may not assume.
13) How many pull plates come in a pack of the Don-Jo 7110?
Sold one at a time, shelf pack of 1. So a two-leaf entry with a pull on each leaf is a quantity of two, and a push/pull opening needs the matching push plate ordered as its own line.
How fast can I get the Don-Jo 7110-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo 7110-628 come with a warranty?
Absolutely. The Don-Jo 7110-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo 7110-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo 7110-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!