Don-Jo CFC7015 Pull Plate for ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$59.16
$51.96
Don-Jo CFC7015 Pull Plate for Models 70 & 71 — 15" x 3-1/2", 2-1/4" Projection, 6" CTC, 1-1/2" Clearance

Don-Jo CFC7015 Pull Plate for Models 70 & 71 — 15" x 3-1/2", 2-1/4" Projection, 6" CTC, 1-1/2" Clearance

(No reviews yet) Write a Review

Model: CFD7115-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$59.16
$51.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Don-Jo CFC7015 Pull Plate for Models 70 & 71 — 15" x 3-1/2", 2-1/4" Projection, 6" CTC

The Don-Jo CFC7015 Pull Plate is a commercial-grade door trim accessory engineered for compatibility with Don-Jo Models 70 and 71. Measuring 15" in length and 3-1/2" in width, this pull plate features a 2-1/4" projection, a 6" center-to-center (CTC) spacing, a 3/4" diameter, a 1-1/2" clearance, and a 1-1/4" hole size. Available in a wide selection of finishes — including 605, 606, 612, 613, 628, 629, and 630 — this plate delivers both functional performance and aesthetic versatility for demanding commercial door applications.

Key Features

  • Precise Dimensions: 15" length x 3-1/2" width with a 2-1/4" projection and 1-1/2" clearance, engineered for accurate fit on compatible door preparations.
  • Center-to-Center Spacing: 6" CTC measurement ensures proper alignment with standard door hardware preparations for Models 70 and 71.
  • Hole Size: 1-1/4" hole size (model CFC7015) accommodates standard cylinder and pull configurations; companion models offer 1-1/2" (CFD7015), 2-1/8" (CFK7015), and 2-1/8" with Lever Prep (CFL7015) options.
  • 3/4" Diameter Pull: Consistent 3/4" diameter across the model family provides a comfortable, professional grip suited for high-traffic commercial environments.
  • Broad Finish Selection: Available in finishes 605, 606, 612, 613, 628, 629, and 630 to coordinate with a wide range of commercial door hardware and architectural styles.
  • Model Family Compatibility: Designed for use with Don-Jo Pull Plate Models 70 and 71; companion 16" x 4" variants (CFC7115, CFD7115, CFK7115, CFL7115) available for larger door preparations.
  • Commercial Application Ready: Sold individually (shelf pack of 1), making it straightforward to specify and order for single-door or multi-door commercial projects.

Technical Specifications

  • Subcategory: Pulls and Push Plates
  • Product Group: Door Trim and Accessories
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Push and Pull Plates
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Don-Jo CFC7015?

Don-Jo pull plates are purpose-built for commercial door hardware applications, offering consistent dimensional accuracy across a full model family — from the 15" x 3-1/2" CFC7015 to the 16" x 4" CFC7115 — with multiple hole-size configurations to suit varied door preparations. With seven available finishes and compatibility with Models 70 and 71, the CFC7015 delivers the flexibility and reliability that commercial door hardware professionals demand.

Product Specs

Subcategory:
Pulls and Push Plates
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Don-Jo CFD7115-628 – Frequently Asked Questions

1) Will the Don-Jo CFC7015 pull plate cover the hole left by the lock I'm removing?
Match the hole size to what's in the door. The CFC7015 is a 15 x 3-1/2 inch plate with a 1-1/4 inch hole. If your door is bored for a bigger cylinder or knob, step up in the same family: CFD7015 has a 1-1/2 inch hole, CFK7015 a 2-1/8 inch hole, and CFL7015 a 2-1/8 inch hole with lever prep. All four come in the 16 x 4 inch size as well (CFC7115, CFD7115, CFK7115, CFL7115) if you need more coverage over an old prep or a scarred face.
2) Which Don-Jo pull plate works with a lever handle instead of a knob?
The CFL models are the ones prepped for a lever. CFL7015 (15 x 3-1/2 inch) and CFL7115 (16 x 4 inch) carry a 2-1/8 inch hole with lever prep. The CFK models have the same 2-1/8 inch hole but no lever prep, so if a lever passes through the plate, order a CFL.
3) I need a pull plate for an exit device push bar door. Will this Don-Jo plate work?
Not on the pull side of an exit device. The Don-Jo 70 and 71 plates are general door trim with a bored hole for a cylinder or knob, not a device trim. For Detex Value Series exit devices, the plate to order is the Detex P/PN Series pull plate, which is built for those devices.
4) Will a Trimco 1010 or 1014 pull plate drop into the same holes as a Don-Jo CFC7015?
No. The Don-Jo CFC7015 uses a 6 inch center-to-center pull. The Trimco 1010 Series cast pull plate uses a 5 inch center-to-center pull, and the Trimco 1012 cast tapered heavy duty and 1013 round heavy duty plates both use a 5.5 inch center-to-center pull, so none of those three align with a 6 inch prep. The Trimco 1014 Series half-round pull plate does use a 6 inch center-to-center pull, which is the one Trimco plate that matches the Don-Jo spacing; the 1014 pull is half-round in section where the Don-Jo pull is a 3/4 inch diameter round grip with a 2-1/4 inch projection.
5) What is the closest equivalent to a Don-Jo CFC7015 pull plate in a 3-1/2 by 15 inch size from another brand?
The Delaney 3-1/2" x 15" Door Pull Plate, DLY-4900xx, is built in the same 3-1/2 by 15 inch pull plate series footprint as the Don-Jo CFC7015, which measures 15 inches long by 3-1/2 inches wide. If the door already has a 3-1/2 by 15 inch plate on it and you are matching the opening rather than the pull geometry, that Delaney series covers the same plate outline. The Don-Jo carries a 6 inch center-to-center pull with a 3/4 inch diameter grip and a 2-1/4 inch projection, plus a bored hole through the plate sized 1-1/4 inch on the CFC, 1-1/2 inch on the CFD, and 2-1/8 inch on the CFK, so a locksmith replacing a plate that has a cylinder or knob coming through it should confirm the hole prep before treating the two as interchangeable.
6) I do not need a hole in the plate, just something to push on. What should I order instead of a Don-Jo CFC7015?
Order a push plate. The Don-Jo CFC7015 family is a pull plate: every model carries a pull with a 6 inch center-to-center spacing and a bored hole through the plate, from 1-1/4 inch on the CFC7015 up to 2-1/8 inch with lever prep on the CFL7015. For the push side of a pair of doors, the Delaney 3-1/2" x 15" Push Plate, DLY-4905xx, holds the same plate footprint without the pull, and the Delaney 4" x 16" Push Plate, DLY-490xxx, does the same in the larger size. A common commercial door pair uses the pull plate on the approach side and a flat push plate on the swing side.
7) The door is a high traffic entrance and I want something heavier than a Don-Jo CFC7015. What is the step up?
The Ives 8302, a heavy duty pull plate with through bolt mounting, and the Ives 8303, a heavy duty pull plate with 8 inch or 10 inch center-to-center mounting, are both classified heavy duty. Through bolt mounting on the 8302 carries the pull load through the door rather than into the face material, which is what a school or hospital corridor door tends to be specified with. The 8303 sets the pull at 8 or 10 inches center-to-center against the 6 inch center-to-center pull on the Don-Jo CFC7015, so the grip is longer and the mounting holes will not line up with an existing 6 inch prep.
8) My door has an exit device on it. Can I use a Don-Jo CFC7015 pull plate on the outside?
Not as an exit device trim. The Don-Jo CFC7015 is a pull plate prepped for a cylinder or knob opening through the plate, with hole sizes of 1-1/4 inch, 1-1/2 inch, 2-1/8 inch, and 2-1/8 inch with lever prep across the family. Exit device outside trim has to match the device it mounts to, and the Detex P/PN Series pull plate, DTX-01P, is made specifically for Detex Value Series exit devices. If the opening has a Detex Value Series device, order the P/PN Series trim; reserve the Don-Jo plate for openings where the pull is mounting to the door face rather than to a device.
9) Should I use a 15 x 3-1/2 inch or a 16 x 4 inch pull plate?
Size to the stile and to what you're covering. The 15 x 3-1/2 inch plates (CFC7015, CFD7015, CFK7015, CFL7015) suit a narrower stile or a plainer look. The 16 x 4 inch plates (CFC7115, CFD7115, CFK7115, CFL7115) give an extra inch of length and half an inch of width, which is what you want when the old plate was larger or the door face is marked up around the prep. Hole options are identical across both sizes.
10) What finishes do the Don-Jo CFC7015 pull plates come in, and which one matches my aluminum storefront doors?
Four finishes are orderable on every model and size: 605 polished brass, 613 oil rubbed bronze, 628 satin aluminum, and 630 satin stainless steel. On aluminum storefront, 628 satin aluminum is the match for clear anodized doors; 630 satin stainless is the usual choice when the rest of the hardware on the opening is stainless.
11) Does a Don-Jo pull plate come with a push plate for the other side of the door?
No. Don-Jo CFC, CFD, CFK and CFL plates are pull plates, sold one at a time. A push-pull opening needs the push plate ordered separately, and Delaney lists matching sizes: the Delaney 3-1/2 x 15 inch push plate pairs dimensionally with the 7015 plates, and the Delaney 4 x 16 inch push plate with the 7115 plates.
12) Is a Don-Jo pull plate heavy duty enough for a high traffic entrance?
The CFC, CFD, CFK and CFL plates are commercial-rated trim and go on office, school, healthcare, retail, warehouse and government openings. Where a spec calls out heavy duty explicitly, the Ives 8302 and 8303 and the Trimco 1010, 1012 and 1013 series are the plates carried as heavy duty. The Ives 8302 is through-bolt mounted, which is what an entrance on constant pull usually wants.
13) What is a more decorative alternative to a Don-Jo CFC7015 pull plate for a lobby or tenant entry door?
Emtek's push and pull plate lines are the decorative direction: the Knoxville series, the Modern series, and the Petal series, which is lost wax cast bronze. Those suit a lobby, a leasing office, or a boutique tenant entry where the hardware is part of the design intent. The Don-Jo CFC7015 is a commercial door trim accessory with a 3/4 inch diameter grip and a 2-1/4 inch projection, offered in 605 polished brass, 606, 612, 613 oil rubbed bronze, 628 satin aluminum, 629, and 630 satin stainless steel, which is the finish range you want when the plate has to coordinate with existing commercial hardware down a corridor rather than stand out.
14) I need a pull plate with a hole for a lever. Which options actually cover that?
Within the Don-Jo family the CFL7015 and CFL7115 carry a 2-1/8 inch hole with lever prep, at 15 by 3-1/2 inch and 16 by 4 inch respectively, which is the configuration to order when a lever passes through the plate. Among other brands, the Delaney 3-1/2" x 15" and 4" x 16" pull plate series cover the same two plate footprints, and the Trimco 1014 Series half-round pull plate matches the 6 inch center-to-center pull spacing. A distributor quoting a lever-prepped plate should specify the CFL prefix explicitly, since CFC, CFD, and CFK share the same plate size and pull but differ only in the bored hole at 1-1/4 inch, 1-1/2 inch, and 2-1/8 inch.
15) Is 1-1/2 inches of clearance enough on a pull plate for gloved hands?
1-1/2 inches of clearance behind a 3/4 inch diameter grip, with the pull standing 2-1/4 inches off the door face, is a full-hand grip. That's workable with a work glove on. If your crew runs heavy winter or cut-resistant gloves, measure a fist against 1-1/2 inches before you commit across a building.
16) What's a decorative alternative to a plain commercial pull plate for a lobby or office suite door?
Don-Jo's CFC and CFD plates are plain commercial trim, sized to cover a bored prep. Where the door is on show, Emtek's push and pull plate sets are the decorative route: Knoxville, Modern, and the lost wax cast bronze Petal. Those are styled sets rather than prepped cover plates, so check the door face against what the Emtek plate covers before pulling an existing lock.
17) If I'm standardizing pull plates across a building, can I order one model in every finish?
Yes. Every one of the eight models (CFC7015, CFD7015, CFK7015, CFL7015 and the 7115 equivalents) is offered in all four finishes: 605, 613, 628 and 630. So you can hold one hole size across the building and change finish by wing or floor, or hold one finish and vary the hole size to suit each door's prep. Plates are sold individually, so quantities are per door leaf, not per pair.
How fast can I get the Don-Jo CFD7115-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Don-Jo CFD7115-628 come with a warranty?
Absolutely. The Don-Jo CFD7115-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Don-Jo CFD7115-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Don-Jo CFD7115-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!