You may also like
Dormakaba E-Plex E5010 Electronic Push Button Exit Device Lever Trim with Key Override
Model: DOR-E5010-Exit Trim
E-Plex 5000 SeriesThe E-Plex 5000 Electronic Pushbutton Lock Series provides exterior access by combination, while allowing free egress. This electronic pushbutton lock eliminates problems and costs...
Dormakaba
Starting at
$1,390.00
$911.99
Dormakaba E3066-MSNT E-Plex Push Button Satin Chrome Narrow Stile Lock
The E-Plex 3000 Series provides exterior access by combination, while allowing free egress. This electronic pushbutton narrow stile lock eliminates problems and costs associated with issuing, controlling, and collecting keys and cards, has up to 300 Access Codes and 9,000 Audit Events.
Retrofits inside trim for Adams Rite locks 1850, 1950, 4070, 4510, 4520, 4530, 4710, 4720, 4730, 4900, 4920AN, MS 1850S, MS 1950S, and 8400 Series (not included). Adapter Kit available for various manufacturers’narrow stile Exit Devices; see accessories section.
- 300 access codes per door
- The most recent 9,000 events are recorded in memory, including use of the mechanical key override
- Locks are programmed via keypad or with optional Microsoft Excel-based software—simplifies management of doors and users as facility’s number of users and access points grow
- PIN access
- Lockout
- Passage—PIN or key enabled, can be pre-programmed to re-lock after a certain number of hours (from 1 to 24)
- Five different levels allow who has access to specific lock functions, including: Service Codes—programmed for one-time access or "come-and-go" access for 1 to 24 hours
- Code length: adjustable to accept 4 to 8 digits
- Anti-tamper lockout: adjustable from 3 to 9 invalid attempts with an adjustable period of 0 to 90 seconds
- Re-lock time: adjustable from 2 to 20 seconds
- No wire installation—eliminates wiring to or through the door—no risk of pinched wires
- Construction: Extra heavy-duty lockset, solid cast housing, solid cast lever or thumbturn wear tested for extensive use in indoor and outdoor applications
- Handing: Non-handed, easily changed in the field
- Backset: 31⁄32" (25 mm) minimum
- Minimum Stile Recommended: 2" (51 mm)
Key Override
- Mortise Cylinder: Mortise Cylinder in Schlage "C" Keyway
- Interchangeable Cores: Optional Mortise Shell accommodates small format—Best and equivalent (6-pin length)
Door Preparation: Easily installs on narrow stile doors with four mounting screws
- Door Thickness: 1¾" (44 mm)
- Accessibility Standard: American with Disabilities Act (ADA)
- Durability: Designed and fully tested to meet rigid life cycle test and operating reliability per BHMA Grade 1 requirements.
- Environmental: Indoor/Outdoor Approved
- Front Housing: -31 °F (-35 °C) to 151 °F (66 °C)
- Warranty: 3-year warranty from date of installation; built-in warranty counter in lock memory
Standard Finishes:
- Satin Chrome 26D (626) housings and levers
Manufacturer Resources
Product Specs
- Product Group:
- Exit Devices and Trim
- Series:
- E-Plex 2000 Series
- Product Type:
- Exit Device Trims
- Product Subgroup:
- Exit Devices Trim
- Subcategory:
- Push Buttons Locks
- Stile Width:
- 5"
- Commercial/Residential:
- Commercial
- Cylinder and Keyways:
- Schlage C keyway standard for XS key override option
- Electronic:
- Yes
- Stile Type:
- Wide Stile
- Lock Type:
- Exit Device Trim
- Lock Function:
- Exit Trim for Rim, Mortise, Surface Vertical Rod
- Product Attribute:
- Electronic Locks
- Door Hand Direction:
- Field Reversible
- Product Category:
- Electronic Locks
- Product Substrate:
- Brass or Bronze
- Department:
- Door Hardware
Dormakaba E3066-MSNT-626 – Frequently Asked Questions
1) Can the E-Plex E3066-MSNT replace the inside trim on my Adams Rite deadlatch?
That is exactly the retrofit it is made for. The E3066-MSNT replaces inside trim on Adams Rite 1850, 1950, 4070, 4510, 4520, 4530, 4710, 4720, 4730, 4900, 4920AN, MS 1850S, MS 1950S and 8400 Series locks. The Adams Rite lock body itself is not included, so you are reusing what is already in the door.
2) Does the E-Plex pushbutton lock need wiring run to the door?
No wiring at all. The E3066-MSNT is a standalone battery pushbutton lock, so there is nothing to run through the hinge edge and no pinched wire risk in an aluminum door. If your job calls for a trim that ties into an access control panel, an electrified trim like the Command Access ET26 or the Von Duprin E360L-BE-03 fail safe passage trim is the wired route instead.
3) What keyway does the E-Plex key override use, and can I put my building's cores in it?
The mechanical override cylinder is a mortise cylinder in Schlage C keyway as standard. An optional mortise shell takes small format interchangeable cores, Best and equivalent, in 6-pin length, so a facility already keyed on SFIC can bring this door into the same system.
4) Can I use the E-Plex E3066-MSNT on an exit device instead of a deadlatch?
Yes, it serves as exit trim for rim, mortise and surface vertical rod devices. For narrow stile exit devices from other manufacturers, an adapter kit is required and is sold separately, so specify the adapter that matches your device brand when you order.
5) What narrow stile exit device trim can replace the Dormakaba E3066-MSNT E-Plex when no electronic access control is wanted?
The E3066-MSNT is an electronic pushbutton lock holding up to 300 access codes and 9,000 audit events, with a Schlage C keyway mortise cylinder for key override. If the opening only needs mechanical trim on a narrow stile door, the BEST Precision 2000 Series 2001 is a narrow stile exit only pull trim with a cover plate, and the BEST 2900 Series 2901 is a narrow stile exit only lever trim for 2000 Series exit devices. Both are exit only, meaning egress through the device with no coded or keyed entry from outside, so they suit a door that is entered elsewhere.
6) If access needs to be controlled from a central access control panel rather than by codes at the door, what should be used instead of the Dormakaba E3066-MSNT E-Plex?
The E3066-MSNT E-Plex is a standalone lock programmed at the keypad or with optional Excel-based software, and it installs with no wiring to or through the door. Where the door must answer to a panel, card reader, or fire alarm interface, an electrified trim is the different approach: Command Access ET15, ET25, and ET26 are electrified exit trims with 12V/24V operation and fail safe or fail secure options, the ET26 with Grade 1 construction and a field reversible design. Command Access 230L is an electrified version of the Von Duprin 230L trim for V96/36/23 Series devices. Falcon 510L-FSA/FSE is an electrified heavy duty trim for 25 Series devices, and Von Duprin E360L-BE-03 is a Grade 1 electric passage trim with an 03 lever, fail safe, for 33/35A Series devices. These require power run to the opening; the E-Plex does not.
7) What is the difference between the Dormakaba E3066-MSNT E-Plex and a keyed nightlatch trim like the Sargent 704ET or Von Duprin 110MD-NL?
Both control entry from the outside while leaving free egress through the exit device, but the credential differs. The E3066-MSNT E-Plex opens on a PIN of adjustable 4 to 8 digit length with a mechanical key override on a Schlage C keyway mortise cylinder, and records the most recent 9,000 events including use of that key override. Sargent 704ET is a Grade 1 heavy duty night latch lever trim with field reversible operation, and Sargent 704-ETL is a Grade 1 heavy duty nightlatch lever trim with a key retract function for PE Series devices. Von Duprin 110MD-NL is a Grade 1 heavy duty night latch cylinder assembly for metal and wood doors, used on 22, 55 and 98/99 exit trim. Those open on a key only, with no code administration and no event record.
8) The door is 1-3/8 inch thick - can the Dormakaba E3066-MSNT E-Plex be used, or is another trim needed?
The E3066-MSNT E-Plex is specified for a 1-3/4 inch (44 mm) door thickness. For a thinner door, several comparable exit trims cover a range: Pamex E9000 storeroom function L3 lever heavy duty trim is Grade 1 with a 1-3/8 inch to 2 inch door thickness range, and the Tell escutcheon and thumbpiece trims - EDELT53 keyed entry, EDELT80 storeroom, EDTHP53 thumbpiece keyed entry, and the EDPT pull trim with cylinder hole - are each listed for 1-3/8 inch to 1-3/4 inch doors. Those are mechanical trims, so entry is by key rather than by code.
9) Do I have to order the E3066-MSNT handed?
No. Handing is set in the field on the E3066-MSNT, so one part covers left and right hand openings. Useful if you are standardizing across a building and do not want two SKUs on the shelf.
10) How many people can I give codes to on one E-Plex door, and can I see who came through?
Up to 300 access codes per door, and the lock holds the most recent 9,000 events in memory, including any use of the mechanical key override. Codes are 4 to 8 digits, adjustable. Programming is done at the keypad or through optional Excel-based software when you are managing enough doors that keypad entry gets tedious.
11) Can this pushbutton lock be left unlocked during business hours?
Yes, there is a passage mode enabled by PIN or key, and it can be pre-programmed to re-lock automatically after 1 to 24 hours so nobody has to come back and secure the door. Service codes can also be issued for one-time access or come-and-go access over a 1 to 24 hour window, which is how you handle a cleaning crew or a vendor without giving out a permanent code.
12) Will the E-Plex E3066-MSNT hold up on an exterior door in cold weather?
It is approved for indoor and outdoor use, with the front housing rated from -31 F (-35 C) to 151 F (66 C). Construction is a solid cast housing on an extra heavy duty lockset, and it is tested to BHMA Grade 1 life cycle and operating reliability requirements. It also meets ADA accessibility.
13) What is the difference between a keypad exit trim and a standard keyed lever trim?
The E3066-MSNT grants exterior access by code rather than by key or card, which takes key issue, control and collection out of the equation, and it logs entries. Free egress from inside is unaffected either way. If you only need a keyed outside lever and no credential management, mechanical trims cover it: the Design Hardware KIL storeroom trim in Schlage C keyway, the Sargent 704ET night latch trim, or the Tell EDELT80 storeroom trim. If the outside handle should only ever pull the door and never latch it, an exit only pull like the BEST Precision 2001 narrow stile pull trim is the simpler answer.
14) What should be specified instead of the Dormakaba E3066-MSNT E-Plex on a door that must stay unlocked from the outside during business hours?
The E3066-MSNT E-Plex can be put in a passage state by PIN or key that pre-programs itself to re-lock after 1 to 24 hours, so it will do this without a second product. Where a plain always-unlocked pull is wanted with no code administration, passage function trims cover it: Arrow SRX01 is a passage function Sierra lever with rose for ED910, S1150 and S1250 devices, Corbin Russwin 3310AET is a passage function trim for ED3000 Grade 1 Series rim, surface vertical rod and mortise devices, x810ET is passage function trim for the ED4000 Grade 1 Series, and x910ET is passage function heavy-duty trim for the ED5200S, ED5200, ED5400 and ED5800 Grade 1 Series. Those stay unlocked full time unless the device itself is dogged or keyed.
15) Does a dummy or blank escutcheon trim such as the Detex 02BN or Von Duprin 230DT do the same job as the Dormakaba E3066-MSNT E-Plex?
No. Detex 02BN is a dummy function S-lever trim with a blank escutcheon for Value Series exit devices, Von Duprin 230DT is a heavy duty dummy trim with a 10 gauge steel escutcheon for 22 Series, Von Duprin 210K-BE is a knob with blank escutcheon for 22 Series, and Falcon 212L is a blank escutcheon lever trim for 20 Series devices. Those are pull-only or non-operating exterior trim - they never retract a latch. The E3066-MSNT E-Plex grants exterior access by combination with up to 300 access codes per door while allowing free egress, so it is the choice where someone has to get in from outside.
16) For a classroom or lab door, how does the Dormakaba E3066-MSNT E-Plex compare with classroom function exit trim?
Classroom function trims control the outside lever with a key: Falcon 510L is a heavy duty classroom function trim with a lever handle for 24/25 Series devices, Falcon 179L is a medium duty classroom function lever control trim for 1790 Series devices, Accentra 446F is a Grade 1 classroom function exit device trim with an Augusta lever, and Dexter ED1000T-CLRM-TP-NC is a Grade 1 classroom trim with thumbpiece, pull plate and cylinder, less cylinder. The E3066-MSNT E-Plex reaches the same result by code instead of key, with five access levels, service codes for one-time or come-and-go access of 1 to 24 hours, and an anti-tamper lockout adjustable from 3 to 9 invalid attempts. It is tested to meet BHMA Grade 1 life cycle and operating reliability requirements and meets ADA.
17) What lever trim matches the Dormakaba E3066-MSNT E-Plex satin chrome finish on the other doors of a building?
The E3066-MSNT E-Plex comes in 626 satin chrome, applied to both the housings and the levers. Comparable exit device trims offered in the same 26D satin chrome family include the Tell EDELT53 keyed entry escutcheon lever trim, the Tell EDELT80 storeroom function escutcheon lever trim, the Tell EDTHP53 thumbpiece entry trim, the Tell exit device pull trim with cylinder hole less cylinder, and the Design Hardware 2P-03NL pull trim with cylinder hole in night latch function. That lets a facility hold one appearance across coded, keyed, and pull-only openings.
18) What storeroom function trim is comparable to the Dormakaba E3066-MSNT E-Plex for a door that must always latch behind whoever enters?
The E3066-MSNT E-Plex re-locks on an adjustable 2 to 20 second timer after a valid code, so the door secures itself without anyone doing anything. Mechanical storeroom trims that stay locked from the outside at all times include Marks USA M195F, a storeroom function lever and rose trim with spring loaded roses for M9900 touchbar devices, Marks USA M195N, a storeroom function lever and rose trim in the M195N series, Pamex E9000, a Grade 1 storeroom function L3 lever heavy duty trim, and Design Hardware KIL storeroom function trim with a Schlage C keyway. All of those need a key on every entry rather than a code.
19) Which trims take the same Schlage C keyway as the Dormakaba E3066-MSNT E-Plex key override so a building stays on one key system?
The E3066-MSNT E-Plex uses a mortise cylinder in the Schlage C keyway for the XS key override option, and an optional mortise shell accommodates small format interchangeable cores in Best and equivalent 6-pin length. Among comparable exit trims, Design Hardware KIL entry function and KIL storeroom function trims for 1000 and 2000 Series exit devices are both specified with a Schlage C keyway and a flat lever. Keying those to the same system keeps one override key working across the coded door and the keyed doors.
20) What finish does the Dormakaba E3066-MSNT come in?
Satin chrome 26D (626) on the housing and lever, and that is the only finish it is built in. It lines up with 626 lever trims already on other openings, so a building standardized on satin chrome stays consistent.
21) Will the E-Plex lock out someone trying to guess the code?
Yes. Anti-tamper lockout triggers after an adjustable 3 to 9 invalid attempts and holds for an adjustable 0 to 90 seconds. Re-lock time after a valid entry is adjustable from 2 to 20 seconds, and there are five authority levels controlling who can reach which programming functions.
22) Both the Dormakaba E3066-MSNT E-Plex and the Sargent 744 are described as non-handed or field reversible - do they solve the same problem?
They handle handing the same way but serve different entry methods. The E3066-MSNT E-Plex is non-handed and easily changed in the field, and its lock function covers exit trim for rim, mortise, and surface vertical rod devices. Sargent 744 is a Grade 1 70 Series freewheeling night latch trim where the key retracts the latch, for surface vertical rod and mortise 8700 and 8900 Series devices, and Sargent 704ET is a Grade 1 heavy duty night latch trim with field reversible operation. Command Access ET26 is also a field reversible electrified trim with Grade 1 construction. Choose on how the door is credentialed - code, key, or panel - since field reversibility is common to all of them.
23) For a lower-traffic interior door, what is a simpler alternative to the Dormakaba E3066-MSNT E-Plex?
The E3066-MSNT E-Plex is an extra heavy-duty lockset with a solid cast housing and solid cast lever or thumbturn, tested to BHMA Grade 1 life cycle requirements for indoor and outdoor use. Where that duty level is more than the opening needs, Falcon 179L is a medium duty classroom function lever control trim for 1790 Series devices, and Falcon 212L is a medium duty escutcheon lever trim for 20 Series devices with shear pin protection. Delaney 500L entrance function exterior lever trim is offered in CT, MD, and SD lever styles for a plain keyed entry door.
How fast can I get the Dormakaba E3066-MSNT-626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Dormakaba E3066-MSNT-626 come with a warranty?
Absolutely. The Dormakaba E3066-MSNT-626 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Dormakaba E3066-MSNT-626?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Dormakaba E3066-MSNT-626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.