DynaLock 2022-TJ22 Double Elec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,410.00
$1,161.11
DynaLock DynaLock 2022-TJ22 Double Electromagnetic Inswing Lock With Dual Armature 1200LB, 2000 Series Surface Mount DYK-2022-TJ22

DynaLock 2022-TJ22 Double Electromagnetic Inswing Lock With Dual Armature 1200LB, 2000 Series Surface Mount

(No reviews yet) Write a Review

Model: 2022TJ22
$1,410.00
$1,161.11

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,410.00
$1,161.11
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

DynaLock 2000 Series Electromagnetic locks

Model 2022-TJ22

2022-TJ22 Double Inswinging Door
Double coil. Mounts to the face of the frame header.
1200 Lbs. holding force per leaf

The 2000 Series is a full size 1200 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings when low cost and highsecurity are required

All 2000 Series locks are designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate “door contacts”.
The 2000 Series is offered in single, double, and split armature models for both outswinging and inswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.

Standard Features

• Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections.
• Low power consumption conserves energy, reduces operation cost, and extends battery backup time.
• A totally plated coil and armature provides protection against corrosion.
• A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates.
• No residual magnetism - the door releases without delay when lock is de-energized.
• Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment.
• Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized.
• Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.

Electromagnetic locks, surface mounted for outswing or inswing single or double doors.
Size: 1-1/2”D x 2-3/4”H x 11”L Single or 22”L Double
Multi-voltage auto-sensing 12/24 VAC/VDC
Current Draw: 374 mA @ 12VDC Single / 748 mA Double
                           210 mA @ 24VDC Single / 420mA Double
Adjustable Relock Time Delay (Former TD Option) is standard on all models

DynaLock_Corp-2022-A-Catalog_HQ_Print_20211027.pdf

http://www.dynalock.com/

Manufacturer Resources

Product Specs

Subcategory:
Electromagnetic Locks
Series:
2000 Series
Holding Force:
1200 lbs.
Product Group:
Electronic Access Controls
Product Subgroup:
Electromagnetic Locks
Commercial/Residential:
Commercial
Battery Operated:
No
Door Type:
Inswing
Electronic:
Yes
Product Type:
Electromagnetic Locks
Warranty:
Lifetime Warranty
Product Model:
2022-TJ22
Product Voltage:
12/24 VDC
Product Size:
1-3/4"D x 2-3/4"H x 22"L
Mounting Method:
Surface
Product Category:
Electronic Access Controls
Department:
Door Hardware

DynaLock 2022TJ22 – Frequently Asked Questions

1) Will the DynaLock 2022-TJ22 work on a pair of inswinging doors?
That's exactly what the 2022-TJ22 is built for. It's a double-coil magnet in a single 22 inch housing that mounts to the face of the frame header, with an armature on each leaf, and it's designated for inswinging doors. For a pair of outswinging doors you need the outswing version of the 2000 Series instead, since the armature and housing geometry differ between the two.
2) Is the 1200 lbs holding force per door or split between the two leaves?
1200 lbs per leaf. The 2022-TJ22 carries two independent coils, so each door in the pair gets the full 1200 lbs of holding force rather than sharing it.
3) How much clearance do I need on the frame header for a 22 inch DynaLock mag lock?
Plan for a 22 inch run along the header, 2-3/4 inches of face height, and 1-3/4 inches of depth. The backset is narrow at 1-1/2 inches, which often lets you skip the filler plates or mounting brackets a deeper magnet would need.
4) What voltage and current do I need to size a power supply for the 2022-TJ22?
It auto-senses 12 or 24 VAC/VDC in the field, so no jumper hunting. Because it's a double magnet, budget 748 mA at 12VDC or 420 mA at 24VDC. Running it at 24V roughly halves the current, which matters if you're putting several pairs of doors on one supply with battery backup.
5) Do I still need separate door contacts if I want to monitor these doors?
No. The 2022-TJ22 can be ordered with an integrated door status switch, a high security (magnetic bond) monitor, or both, which reports door position and lock status back to your access control panel without installing separate door contacts. You can also take the Value Option Package, and any of these can be combined.
6) What is the closest double-door magnetic lock alternative to the DynaLock 2022-TJ22?
The DynaLock 2022-TJ22 is a surface mount double electromagnetic lock with dual armature rated at 1200 lbs holding force per leaf on 12/24 VDC. Two other double-door magnets to weigh against it are the Alarm Controls 1200D Series double magnetic locks and the Dorma EML320, which is a double door electromagnetic lock rated 1500 lb and listed as electrically locked (fail safe) with a fire rating. The DynaLock version is built for inswinging double doors and mounts to the face of the frame header.
7) Can the DynaLock 2022-TJ22 be used on an exterior door exposed to weather?
The 2022-TJ22 is a surface mount magnet for commercial, industrial and institutional openings, and its plated coil and armature give corrosion protection, but the models specifically built for wet locations are different parts. For exposed openings look at the Alarm Controls 1200WP Series weather resistant magnetic locks, the Locknetics WMG Series weatherproof electromagnetic lock in 600lb or 1200lb models at 12/24VDC, or the Dortronics 1000 Series industrial magnetic lock with sealed electronics and weather resistant construction on field selectable 12/24VDC.
8) I only have a single door opening - what should I order instead of the 2022-TJ22?
The 2022-TJ22 is a double lock with dual armature covering two leaves at 1200 lbs each, so it is more magnet than a single opening needs. For one leaf, options include the Alarm Controls 1200 Series single magnetic lock, the ROFU 8512 single magnet with selectable keyhole mount at 1200 lb holding force on 12/24VDC, the Dorma EML310 single door lock at 1500 lb with a door position sensor, and the Schlage M420 single door magnet at 500 lbs for lighter openings.
9) Is the relock time delay an extra option on DynaLock 2000 Series locks?
No, it comes standard. The adjustable relock time delay (formerly the TD option) is included on every 2000 Series model, so you don't specify it separately. There's also no residual magnetism, so the doors release immediately when the magnet is de-energized.
10) Can I use a magnetic lock like this on a fire rated door pair?
The 2000 Series is designed for life safety and high security on rated or nonrated doors and frames. As a fail safe magnet it drops open on power loss, which is how it belongs on an egress opening. Confirm your local AHJ's requirements for release devices on the opening before you set it.
11) Does a mag lock like this need mortising into the frame?
No mortise work. The 2022-TJ22 is surface mounted, with adjustable mounting on the housing and armatures that pivot slightly to take up door irregularities. Wiring lands on a plug-in circuit board inside the concealed compartment behind the access cover, and built-in spike suppression protects the rest of the access control electronics when the magnet drops.
12) Should I use a mag lock or a shear lock on this opening?
A surface magnet like the 2022-TJ22 sits on the face of the header with visible armatures on the doors, and it's the fastest install with no door prep. A shear lock such as the ROFU 8031-002, rated 2200 lb and monitored on 12/24VDC, mounts concealed in the header and gives higher holding force with nothing showing, but it demands accurate door alignment and frame preparation. Pick the surface magnet for retrofit speed, the shear for appearance and force.
13) What do I use if the opening needs delayed egress instead of a straight mag lock?
The DynaLock 2022-TJ22 is a standard 1200 lbs per leaf magnet with adjustable relock time delay, which is not the same as a delayed egress device. When the life safety plan calls for delayed egress on a single opening, the Alarm Controls 1200DE Series is the delayed egress magnetic lock for single doors.
14) Is a shear lock or mortise magnet a substitute for the 2022-TJ22?
No - they solve a different mounting problem. The 2022-TJ22 surface mounts to the face of the frame header with the armature on the door face. The ROFU 8031-002 is a shear lock rated 2200 LB holding force on 12/24VDC and monitored, and the Schlage 320M is a compact mortise lock for sliding doors at 1500 lbs holding force. Both are concealed-style installs that require door and frame preparation rather than a surface-applied housing, so choose them when an exposed magnet on the header is not acceptable.
15) How does the monitoring on the DynaLock 2022-TJ22 compare with other monitored magnets?
The 2022-TJ22 can be ordered with a door status switch, a high security monitor, or both, so door position and lock bond can be reported back without separate door contacts. Comparable monitored magnets include the Locknetics MG Series, offered in standard or monitored 600lb/1200lb models at 12/24VDC, the Dorma EML310 with a door position sensor and a bond alert version, and the Schlage M390RFK with door status monitor and magnetic bond sensor.
How fast can I get the DynaLock 2022TJ22 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 2022TJ22 come with a warranty?
Absolutely. The DynaLock 2022TJ22 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 2022TJ22?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 2022TJ22 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!