You may also like
DynaLock 4000 Series - Filler & Spacer Plates Angle Brackets
Manufacturer Resources
Product Specs
- Subcategory:
- Accessories
- Series:
- 4025
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Filler Plates
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 4425 – Frequently Asked Questions
1) What is a DynaLock 4025 filler plate used for on a 2268-20 magnetic lock install?
The 4025 filler plate is an installation accessory that shims a DynaLock 2268-20 magnetic lock down from the frame or header so the armature and magnet meet flush. When the door is set back from the header face, or a stop or weatherstrip holds the magnet off its plane, you stack the plate behind the lock body to take up that gap. It is sized to the 28 inch lock body, so it runs the full length of the magnet rather than spot-shimming at the fasteners.
2) My mag lock gap is deeper than 3/4 inch, or the door swings the wrong way for a flat shim. What do I need?
Flat filler plates top out at 3/4 inch thickness in the 28 inch size, and they only correct a gap in one plane. If the armature sits on a face perpendicular to the header, or you need to bring the magnet out past what a stack of plates will cover, use an angle bracket from the same DynaLock 4000 Series accessory line rather than more filler plates.
3) How do I figure out which filler plate thickness to order for my 2268-20?
Mount the armature on the door first, close the door, and measure the clear distance from the magnet mounting surface to the armature face. That gap is your plate thickness. Round to the nearest available size (1/8 through 3/4 inch) and combine two plates if the number falls between, for example 1/8 plus 1/4 for a 3/8 gap. The magnet and armature must sit face to face with no residual air gap or holding force drops off.
4) I only need to shim the mag lock out a small amount - do I have to step up to a thicker plate or a different brand?
No. The DynaLock 4025 plate for the 2268-20 is stocked in six thicknesses, starting at 1/8 inch and stepping through 1/4, 3/8, 1/2, 5/8 and 3/4 inch, so a small standoff is handled within the same 28-inch by 1-1/4 inch plate rather than by switching to another line such as the Locknetics MFP or WFP aluminum plates, which are built for the MG and WMG Series locks.
5) Is the DynaLock 4025 filler plate rated for commercial door openings?
Yes, it is a commercial door hardware accessory, part of the electronic access control line rather than a residential item. Typical use is a mag-locked commercial entry, stairwell, or secured corridor door where the mag lock needs to be packed out from the header.
6) Does a filler plate for a mag lock need any wiring or electrical connection?
No. The plate is a solid spacer with no electrical function. It sits behind the magnet body and the lock's existing wiring is routed through as it normally would be. It is catalogued alongside electronic access control hardware because that is what it mounts, not because it is powered.
How fast can I get the DynaLock 4425 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 4425 come with a warranty?
Absolutely. The DynaLock 4425 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 4425?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 4425 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.