You may also like
DynaLock 4000 Series - Filler & Spacer Plates Angle Brackets
Manufacturer Resources
Product Specs
- Subcategory:
- Accessories
- Series:
- 4085
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Filler Plates
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 4085 – Frequently Asked Questions
1) What are DynaLock 4085 filler plates used for on a 2585 mag lock install?
The 4085 filler plates are shim/spacer bars that go behind a DynaLock 2585 magnetic lock to take up the gap between the lock body and the header or bracket. They're an installation accessory, not a lock or a bracket, so they only make sense as part of a 2585 mount where the armature and magnet faces don't meet flush. All six thicknesses share the same 1-1/4 inch width and 8-1/2 inch length so the plate footprint matches the 2585 mount regardless of how much you shim.
2) What thicknesses do the DynaLock 4085 filler plates come in?
Six thicknesses: 1/8, 1/4, 3/8, 1/2, 5/8 and 3/4 inch, each 1-1/4 by 8-1/2 inches. Pick by the actual measured gap at the door in the closed position. If your gap falls between two, stack thinner plates rather than forcing the larger one, since over-shimming pushes the magnet face proud and costs you holding contact.
3) What's the difference between DynaLock 4085 filler plates and Locknetics filler plates?
Both are shim plates for magnetic locks, but they're brand-matched to different lock families. The 4085 is sized for the DynaLock 2585 in six thicknesses from 1/8 to 3/4 inch. Locknetics offers the MFP50-MFP63 plates in 628 aluminum for the MG Series and the WFP50-WFP63 plates for the WMG Series. Order the set that matches the lock already on the door; filler plates aren't cross-brand parts.
4) I'm standardizing mag lock hardware across a building. Should I stock several 4085 thicknesses?
Yes, if your 2585 installs sit on varied frames. Header depth, stop projection and door reveal differ opening to opening, and the shim you need is set by that gap, not by the lock. Stocking the 1/8, 1/4 and 1/2 inch plates covers most of the range and lets a tech combine them on site instead of ordering per door.
5) Are DynaLock 4085 filler plates rated for commercial door use?
Commercial. These are part of DynaLock's electronic access control line, meant for electrically locked openings in commercial buildings, not residential retrofit hardware.
How fast can I get the DynaLock 4085 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 4085 come with a warranty?
Absolutely. The DynaLock 4085 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 4085?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 4085 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.