DynaLock 7400 Single Gang Box-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$265.22
DynaLock DynaLock 7400 Single Gang Box-Mount, Backlit 3x4 Matrix Rubber Keypad DYK-7400

DynaLock 7400 Single Gang Box-Mount, Backlit 3x4 Matrix Rubber Keypad

(No reviews yet) Write a Review

Model: DYK7400

In Stock (leaves warehouse same day if ordered before 3pm ET)

$265.22
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

DynaLock 7400 Series Stand Alone Digital Keypads

Model 7400 Single Gang Box-Mount, Backlit 3x4 Matrix Rubber Keypad

The DynaLock 7400 durable keypad that is designed to be the most cost effective access control solution for indoor and outdoor residential, commercial and institutional applications. It will store 1 to 500 user PIN codes, with up to three access levels for each. The 7400 features a user-friendly setup menu, which makes configuration and use very simple for endusers. A wide array of functions and auxiliary modes provide extra flexibility and security, allowing it to operate as a single or two-door access controller. The 7400 incorporates a UV-resistant, epoxy sealed polycarbonate housing, designed to withstand the elements. Red backlit keys enhance visibility in lowlight conditions and a flexible power input allows the unit to operate on 12-24VDC or 16-24VAC. Two Form-C relay outputs, rated at 2 Amps, as well as REX and Auxiliary inputs are provided

Standard Features
• 500 User Codes: Up to 500 codes can be programmed using one of two easy enrolling methods.
• Flexible Power Input: 12-24 VDC or 16-24VAC.
• 3 User and Access Levels: Program one to three different levels of access for each individual user or for the entire system.
• Multiple Inputs and Outputs: Unit includes a REX and Auxiliary input as well as two form C outputs rated at 2 Amps.
• Audio and Visual Recognition: Equipped with an internal sounder and two tri-colored status/programming LED’s.
• Multiple Auxiliary Modes: Ten programmable auxiliary modes including: Door Ajar, Forced Door, Alarm Shunt, and Door Monitor.
• Weather Resistant: IP65 water and UV resistant.
• Vandal Resistant: Built in optical tamper sensor.
• Installer Friendly: Includes an installation kit and self-adhesive mounting template.
• Lifetime Warranty

DynaLock_Corp-2022-A-Catalog_HQ_Print_20211027.pdf

http://www.dynalock.com/

Manufacturer Resources

Product Specs

Subcategory:
Push Buttons
Series:
7400
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Type:
Keypads
Commercial/Residential:
Commercial
Electronic:
Yes
Warranty:
Lifetime Warranty
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Product Model:
7400
Product Voltage:
12 to 24VDC
Product Category:
Electronic Access Controls
Product Substrate:
Polycarbonate
Department:
Door Hardware

DynaLock DYK7400 – Frequently Asked Questions

1) Can the DynaLock 7400 keypad be mounted outdoors?
Yes. The 7400 keypad uses a UV-resistant, epoxy sealed polycarbonate housing rated IP65 for water and UV resistance, so it holds up on exterior openings as well as interior ones. It's sold for residential, commercial and institutional use. For vandal exposure it also carries a built-in optical tamper sensor.
2) What power supply do I need for a DynaLock 7400 keypad?
The 7400 takes 12-24 VDC or 16-24 VAC, so most standard access control power supplies already on a job will run it without a separate transformer. That flexible input is useful when you're tapping an existing maglock supply rather than pulling new power.
3) Will the DynaLock 7400 control two doors, or just one?
Either. The 7400 can run as a single-door or two-door access controller. It provides two Form-C relay outputs rated at 2 Amps, which is what lets you drive a second opening or use the spare relay for an auxiliary function instead.
4) Does the DynaLock 7400 keypad fit a standard single gang box?
Yes, the 7400 is a single gang box-mount keypad. It ships with an installation kit and a self-adhesive mounting template, so you can lay out the cutout and fasteners without fabricating anything on site.
5) Can I wire a request-to-exit device and a door contact to the DynaLock 7400?
Both are supported. The 7400 has a REX input and an Auxiliary input in addition to its two relay outputs, and ten programmable auxiliary modes including Door Ajar, Forced Door, Alarm Shunt and Door Monitor. That means a door position switch on the aux input can drive a held-open or forced-door alert without a separate panel.
6) How many user codes does the DynaLock 7400 keypad hold?
Up to 500 user PIN codes, entered by either of two enrolling methods. Each user can be assigned one of three access levels, so a property manager can separate tenants, staff and maintenance on the same door without a separate credential system.
7) Does the DynaLock 7400 need a separate access control panel or software?
No. The 7400 is a stand alone digital keypad, so codes are programmed at the unit through its setup menu with no head-end panel, software or network drop. For a single door or a pair of doors that keeps the install to the keypad, the power supply and the lock.
8) Is the DynaLock 7400 keypad readable at night?
The keys are red backlit for visibility in low light, and the keypad is a 3x4 rubber matrix so the buttons are tactile as well. An internal sounder and two tri-color status LEDs confirm entries and guide programming.
How fast can I get the DynaLock DYK7400 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock DYK7400 come with a warranty?
Absolutely. The DynaLock DYK7400 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock DYK7400?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the DynaLock DYK7400 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!