You may also like
Eaton B-Line series 4Dimension strut channel
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- 4D22
- Hole Pattern:
- SH
- Material Gauge:
- 18 Gauge
- Product Height:
- 2.12 IN
- Product Length Depth:
- 120 IN
- Product Weight:
- 16.03 LB
- Product Width:
- 2.12 IN
- Department:
- Electrical
- Product Finish:
- Pre-galvanized
- Product Material:
- Steel
B-LINE 4D22SH-120GLV – Frequently Asked Questions
1) Is the SH hole pattern on this Eaton B-Line 4Dimension channel slotted or solid?
It is the SH pattern, B-Line's short-slot punched pattern, so you get slotted holes along the channel rather than a solid back. That lets you bolt strut nuts, clamps and fittings anywhere along the run without drilling, and gives you some slide adjustment when you are lining up trapeze hangers or conduit racks.
2) Can I use pre-galvanized strut channel outdoors or in a wet area?
The 4D22SH-120GLV is pre-galvanized steel, which is a mill zinc coating suited to indoor and dry or lightly damp locations. For direct weather exposure, wash-down areas, or corrosive environments, step up to a hot-dip galvanized or stainless channel instead. Cut ends on pre-galvanized stock are bare steel, so field cuts should be touched up with a cold galvanizing compound.
3) Will standard 1-5/8 inch strut nuts and fittings fit the 4Dimension 4D22 channel?
The 4D22 is a 2.12 by 2.12 inch section, not the 1-5/8 inch single channel most generic strut nuts are cut for. Order 4Dimension series nuts, clamps and fittings sized for the 4D22 profile so the nut turns and seats correctly in the slot. Mixing in hardware made for a different channel width is the usual cause of nuts that will not lock.
4) What gauge is the B-Line 4D22 strut and is it heavy enough for a conduit trapeze?
18 gauge steel. That is the lighter of the common strut thicknesses, so the 4D22SH is aimed at conduit runs, light pipe, cable tray supports and equipment bracketing rather than heavy mechanical loads. If your drawing calls out 12 gauge strut for a duct or large pipe trapeze, this is not the substitute.
5) What is the exact part number to order this 10 foot pre-galvanized 4Dimension strut?
Order Eaton B-Line part number 4D22SH-120GLV. Reading the code: 4D22 is the channel profile, SH is the slotted hole pattern, 120 is the length in inches, and GLV is the pre-galvanized finish. Quote that full string to avoid getting a solid-back or plain-finish stick.
How fast can I get the B-LINE 4D22SH-120GLV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D22SH-120GLV come with a warranty?
Absolutely. The B-LINE 4D22SH-120GLV is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D22SH-120GLV?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D22SH-120GLV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.