You may also like
Eaton B-Line series 4Dimension strut channel
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- 4D22
- Hole Pattern:
- SH
- Material Gauge:
- 18 Gauge
- Product Height:
- 2.12 IN
- Product Length Depth:
- 240 IN
- Product Weight:
- 32.06 LB
- Product Width:
- 2.12 IN
- Department:
- Electrical
- Product Finish:
- Yellow zinc chromate
- Product Material:
- Steel
B-LINE 4D22SH-240YZN – Frequently Asked Questions
1) Can I use yellow zinc chromate strut channel outdoors or in a wet area?
Yellow zinc chromate is a plated finish over steel, intended for dry indoor service. It gives corrosion resistance for interior mechanical and electrical rooms, ceilings and equipment framing, not for exterior exposure, washdown areas or corrosive process environments. For those openings you want hot dip galvanized or stainless channel instead.
2) Is 18 gauge strut channel heavy enough for my hanger and trapeze supports?
This 4D22 channel is rolled from 18 gauge steel, which is the lighter of the common strut gauges and is normally used for conduit racks, light trapeze runs, small pipe hangers and equipment mounting. For heavy trapeze spans, large diameter pipe or seismic bracing, specify a heavier gauge channel. Confirm the load against the engineer's spread and spacing for the run.
3) Will standard strut nuts and fittings fit the B-Line 4Dimension 4D22 channel?
The 4D22 is a 2.12 by 2.12 inch profile, which is the square 1-5/8 by 1-5/8 class of strut with the inturned lips that channel nuts, spring nuts, clamps and brackets engage. Hardware is not included with the channel itself, so order your nuts, washers, pipe clamps, post bases and end caps separately when you order the sticks.
4) What does the SH in 4D22SH-240YZN mean on this strut channel?
SH is the hole pattern designation on this B-Line 4Dimension channel, so the 240 inch stick comes pre-punched rather than solid back. If your run calls for a solid back channel for a continuous weld or clean face, SH is not the variant you want.
5) What is the exact part number to order for 20 foot yellow zinc B-Line strut?
Order Eaton B-Line part number 4D22SH-240YZN. That breaks down as the 4D22 channel profile, SH hole pattern, 240 inch length and YZN yellow zinc chromate finish. It is sold as a single stick of that length.
How fast can I get the B-LINE 4D22SH-240YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4D22SH-240YZN come with a warranty?
Absolutely. The B-LINE 4D22SH-240YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4D22SH-240YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4D22SH-240YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.