You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Application:
- Used in dove-tail side, Installs with quarter turn
- Bolt Thread Rod Size:
- 5/16"-16
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 490 lbs
- Load Rating Slip Strength:
- 300 lbs
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .259 IN
- Product Length Depth:
- 1.26 IN
- Product Weight:
- .042 LB
- Product Width:
- .827 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Stainless steel type 316
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
B-LINE 4DTN223SS6 – Frequently Asked Questions
1) What thread size bolt does the B-Line 4DTN223SS6 channel nut take?
The 4DTN223SS6 dove-tail combo nut washer is tapped 5/16"-16. Your bolts, rod, or threaded hangers have to match that thread exactly, so order 5/16 hardware to go with it and don't assume a standard 5/16-18 bolt will run in.
2) How does the 4DTN223SS6 strut nut install in the channel?
It slides into the dove-tail side of the channel and locks with a quarter turn. No spring to compress and no separate washer to fumble, since the nut and washer are a single combo piece. That makes it a one-handed install overhead, which is where most of these go in.
3) Will a 4Dimension dove-tail nut work in standard strut channel?
No. The 4DTN223SS6 is a dove-tail slide-in nut made for the dove-tail side of Eaton B-Line 4Dimension channel. Standard slotted strut takes a spring nut or a conventional channel nut instead. If the channel you are working with doesn't have a dove-tail profile, this is the wrong nut.
4) Is the 4DTN223SS6 suitable for outdoor or corrosive locations?
Type 316 stainless is what you want for wet, coastal, chemical, or wash-down areas, and that is the finish on this nut. Pair it with 316 stainless bolts and 316 channel so you aren't mixing metals at the connection.
5) Do I need a separate washer with this Eaton B-Line channel nut?
No separate washer required. The 4DTN223SS6 is a combo nut washer, so the bearing surface is built into the part. All you add is the 5/16"-16 bolt and whatever fitting or bracket you are attaching.
6) What is the correct part number to reorder these dove-tail strut nuts?
Order by MPN 4DTN223SS6, Eaton B-Line 4Dimension series. That number carries the 316 stainless material and the 5/16"-16 thread, so quoting it to a distributor gets you the same nut every time across a standardized facility.
How fast can I get the B-LINE 4DTN223SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DTN223SS6 come with a warranty?
Absolutely. The B-LINE 4DTN223SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DTN223SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DTN223SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.