You may also like
Eaton B-Line series 4Dimension strut channel nuts
Manufacturer Resources
Product Specs
- Application:
- Used in openside only
- Bolt Thread Rod Size:
- 3/8”-16
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 904 lbs
- Load Rating Slip Strength:
- 330 lbs
- Product Category:
- Dove-tail slide-in nut
- Product Height:
- .35 IN
- Product Length Depth:
- 1.992 IN
- Product Weight:
- .081 LB
- Product Width:
- .75 IN
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Dove-tail combo nut washer
- Product Finish:
- Electro-plated
- Product Details:
- Dove-tail combo nut washer
- Product Material:
- Steel
B-LINE 4DWN224ZN – Frequently Asked Questions
1) What thread size bolt does the B-Line 4DWN224ZN strut nut take?
The 4DWN224ZN 4Dimension channel nut is tapped 3/8"-16, so it pairs with 3/8"-16 threaded rod, hex bolts, or all-thread hangers. If your rod is 1/2"-13 or 1/4"-20, this is the wrong nut for the run.
2) Can this dove-tail nut be used in closed-side or back-to-back strut?
No. The 4DWN224ZN is specified for openside channel only. It is a dove-tail slide-in design, meaning it feeds into the open slot of the strut rather than being turned and locked like a spring nut, so it will not work in a closed or back-to-back section.
3) Do I need a separate washer with this B-Line strut nut?
No separate washer is needed. The 4DWN224ZN is a combo nut washer, so the bearing surface is built into the nut body. One nut and your 3/8"-16 bolt completes the connection.
4) Is the 4DWN224ZN channel nut suitable for damp or outdoor locations?
It is steel with an electro-plated zinc finish, which suits dry interior electrical and mechanical work. For wet, corrosive, or exterior exposure, specify a stainless or hot-dip galvanized channel nut instead.
5) Is a dove-tail slide-in nut better than a spring nut for my strut run?
They install differently. A dove-tail slide-in nut like the 4DWN224ZN feeds into the channel opening and slides to position, which is quick when you are laying out many hangers on an open run of strut. A spring nut is inserted anywhere along the channel and turned a quarter turn to lock, which is what you want when the strut is already installed and both ends are captured. Choose the dove-tail where you have access to slide it in from an open end or along an open face.
How fast can I get the B-LINE 4DWN224ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4DWN224ZN come with a warranty?
Absolutely. The B-LINE 4DWN224ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4DWN224ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4DWN224ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.