B-Line Eaton series fastener hardware and accessories, Heavy and medium duty all purpose anchor, Zinc plated carbon steel ,5⁄8" x 5", Anchors can be i

Yes. The AWA-62-500 is designed to be installed through the fixture, so you can position your strut, bracket, or equipment base, drill through the mounting hole into the concrete, and drive the anchor without lifting the fixture back off. At 5 inches long it has the depth for a through-fixture set on a thicker base plate.

Yes, the AWA-62-500 wedge anchor carries a UL Listing, which matters on inspected electrical work where support hardware for raceway, cable tray, and equipment has to be a listed component.

The AWA-62-500 is zinc plated carbon steel, which suits dry interior work such as equipment rooms, mechanical spaces, and indoor strut and conduit support. Zinc plating is a sacrificial coating, not a corrosion-proof one, so for wet, exterior, or chemically aggressive locations a stainless anchor is the better call.

A wedge anchor like the AWA-62-500 is the choice for solid, poured concrete under heavy and medium duty loads. It expands a small clip at the base of the hole, so it wants sound concrete and a clean, correctly sized hole. Sleeve anchors spread their load over a longer expansion body and are the usual pick for block or lower strength base material. For hollow CMU or brick, a wedge anchor is the wrong part.