Eaton B-Line series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 4"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 10 gauge
- Product Height:
- 4 in
- Product Length Depth:
- 120 in
- Product Weight:
- 11.4 lb
- Product Width:
- 7 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 34010 10 GL – Frequently Asked Questions
1) What size opening or span does the B-Line Grip Strut three diamond plank cover?
The Grip Strut plank runs 120 inches long and 7 inches wide, with a 4 inch channel depth. That 7 inch walking width is what you plan around: for a wider catwalk or platform you run planks side by side to build up the width you need, since the plank itself is a fixed 7 inch section.
2) Is this Grip Strut plank OSHA compliant for walking surfaces?
Yes. The B-Line Grip Strut three diamond plank is listed as OSHA compliant, and the diamond-punched surface is the non-slip footing it is made for. That is the reason it gets specified for catwalks, platforms and stair treads where a smooth plate would be a slip hazard.
3) Will mill-galvanized Grip Strut hold up outdoors or in a wash-down area?
The plank is steel with a mill-galvanized finish, which is the standard coating for general industrial and sheltered outdoor use. For continuously wet, chemical or coastal exposure, most specs call for a heavier hot-dip or stainless option rather than mill-galvanized, so check what the drawing calls out before you commit.
4) How heavy is a 10 foot Grip Strut plank to handle and hang?
Each 120 inch plank weighs 11.4 pounds, so it is a one-man carry and light enough to set in place before fastening. That also matters when you are totalling dead load on an existing support structure, since a run of these adds up quickly across a platform.
5) How much clearance do I need under a Grip Strut plank for the channel legs?
Plan for 4 inches of depth. The plank has a 4 inch channel size and a 4 inch overall height, so the formed legs hang that far below the walking surface. Set your support steel and any conduit or piping underneath with that in mind.
How fast can I get the B-LINE 34010 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 34010 10 GL come with a warranty?
Absolutely. The B-LINE 34010 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 34010 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 34010 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.