B-Line Eaton series ground mounted panel enclosure, 74" height, 24" length, 72" width, 4, Hinged cover, 4FD3PT enclosure, Ground mount, Large double

It carries a NEMA 4 rating, which covers outdoor use, rain, splashing water and hose-directed water. The seal is a seamless poured in-place gasket around the double doors, and the enclosure is UL 50 listed. NEMA 4 does not include corrosion resistance the way 4X does, so for salt air or chemical exposure you want a stainless or 4X enclosure instead.

74 inches high, 72 inches wide and 24 inches deep, with ground mount legs included as part of the assembly. Lay out your pad and conduit stub-ups for a 72 by 24 inch footprint plus clearance for two doors to swing.

No. It weighs 681.6 lb empty, so plan on a forklift, telehandler or crane with rigging to set it, plus a pad or steel base sized for that load. Carbon steel construction at 12 gauge is where most of that weight comes from.

The doors close on a 3-point latching handle with key lock and padlock provision, so you can run it on the key or hang your own padlock for site or utility lockout. The 3-point latch pulls the door tight at top, bottom and center, which is what keeps the gasket seal even across a 74 inch door.

Freestanding. The 4FD3PT is a ground mount design with legs, so it is set on a pad or floor rather than hung on a wall or strut rack. If your install is against a wall at working height, a wall mount enclosure is the right choice instead.

Painted ANSI 61 grey, the standard gear grey used across most switchgear and control lineups, so it matches adjacent panels on a utility or plant site without repainting.

Yes, country of origin is the United States, which matters if you are procuring under a domestic preference clause on a government or utility project.