B-Line Eaton series ground mounted panel enclosure, 74" height, 12" length, 60" width, 4, Hinged cover, 4FD3PT enclosure, Ground mount, Large double

It carries a NEMA 4 rating and is UL 50 listed, so it's built for outdoor use and direct hose-directed water. The seal comes from a seamless poured in-place gasket around the double doors, and the body is 12 gauge carbon steel with a painted ANSI 61 grey finish. NEMA 4 covers windblown dust, rain, splashing and hose-directed water; it does not include the corrosion resistance of a 4X stainless or non-metallic enclosure, so for coastal or chemical wash-down areas look at a 4X instead.

The box measures 74 inches high, 60 inches wide and 12 inches deep. That 12 inch depth is the number to check first: with panels, wireway and door-mounted devices, 12 inches gets tight fast, so lay out your bending space before committing. Height is the enclosure body only, and it sits on ground mount legs, so plan additional height above the pad.

It's a ground mount unit, supplied with ground mount legs rather than wall brackets. It's meant to be set and anchored on a pad or slab, not hung on a structure. If your install is a wall or strut mount, this is the wrong configuration and you want a wall mount NEMA 4 box instead.

Double doors are hinged and secured by a 3-point latching handle, which pulls the door tight against the poured gasket at top, middle and bottom. The handle includes a key lock and padlock provision, so you can secure it with a padlock for site or utility use.

It weighs 478.9 lb empty. At nearly a quarter ton before any panel or gear goes in, this is a rigging and forklift job, not a two-man lift, and the pad or slab needs to be sized and anchored accordingly. Add the weight of your backpan and installed equipment on top of that figure.

At 60 inches wide, a single door would need close to five feet of swing clearance in front of it. The large double door style on this B-Line unit splits that, which matters in a tight yard, an equipment alley or against a fence line. Both leaves are hinged and the 3-point handle secures the assembly.

Only if the entries are sealed to the same rating. The enclosure itself holds NEMA 4 through its 12 gauge welded carbon steel body and seamless poured in-place gasket at the doors, but any hole you field-cut needs a NEMA 4 rated hub or fitting to keep it. Bottom entry through the ground mount leg area is the usual approach on a ground mounted box.

Carbon steel with a painted finish in ANSI 61 grey, the standard grey used across most industrial control and switchgear enclosures, so it will match existing gear in a typical plant or utility yard without repainting.

Order it as Eaton B-Line 746012-4FD3PT, a 4FD3PT series enclosure. Country of origin is the US.