Eaton B-Line series imperial cable tray and ladder, 4" Height, 14.97" Length, 36" Width, 36" and 24" Tray widths, Series 2-5 left reducer, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- CE
- Product Height:
- 4 in
- Product Length Depth:
- 14.97 in
- Product Weight:
- 4.6 lb
- Product Width:
- 36 in
- Radius:
- 24 in
- Special Features:
- 36" & 24" Tray widths
- Department:
- Electrical
- Product Type:
- Series 2-5 left reducer
- Product Details:
- Series 2-5 left reducer
- Product Material:
- Aluminum
B-LINE 4A-36-LR24 – Frequently Asked Questions
1) What does the Eaton B-Line 4A-36-LR24 cable tray reducer actually do in a run?
It transitions a cable tray run from 36 inch width down to 24 inch width, offset to the left side. That means the left side rail stays on the same line through the transition and all the width change happens on the right. Loading depth stays at 4 inches through the fitting.
2) Will this reducer work if my tray run steps down on the right side instead of the left?
No. Model 4A-36-LR24 is a left reducer, so the straight, unbroken rail is on the left and the taper is on the right. If your run needs the opposite geometry you need the right-hand version of the same 36 to 24 inch reducer, not this one. Getting the hand wrong puts the tray centerline in the wrong place.
3) How much straight-run length does this 36 to 24 inch tray reducer take up?
Allow 14.97 inches of run length for the fitting itself, and it is built on a 24 inch radius. Lay that out between your supports before you cut the adjoining straight sections, because the reducer has to land clear of a hanger.
4) Is this cable tray reducer aluminum or steel?
Aluminum. That keeps the fitting light, 4.6 pounds for a 36 inch wide piece, which matters when one electrician is setting it overhead on a lift. It also means you should be matching it to an aluminum tray run and using compatible hardware rather than mixing it into a galvanized steel system.
5) Which B-Line series is this reducer part of?
It belongs to the Eaton B-Line imperial cable tray and ladder line, Series 2 through 5 fittings. Order reducers, elbows and tees from the same series and depth so the rail profiles and splice holes line up at every joint.
6) Does this B-Line cable tray reducer carry any certification for a European or export job?
The 4A-36-LR24 reducer is CE marked, which is what a spec for an export or EU-standard project usually asks for on tray fittings.
How fast can I get the B-LINE 4A-36-LR24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-LR24 come with a warranty?
Absolutely. The B-LINE 4A-36-LR24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-LR24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-LR24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.