B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,071.60
B-Line Eaton series imperial cable tray and ladder, 4" Height, 15" Length, 9" Width, Series 2-5 vertical tee down, Aluminum, 12" Radius

B-Line Eaton series imperial cable tray and ladder, 4" Height, 15" Length, 9" Width, Series 2-5 vertical tee down, Aluminum, 12" Radius

(No reviews yet) Write a Review

Model: 4A-09-VT12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,071.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 15" Length, 9" Width, Series 2-5 vertical tee down, Aluminum, 12" Radius

Manufacturer Resources

Product Specs

Certifications:
UL Classified
Product Height:
4 in
Product Length Depth:
15 in
Product Weight:
10 lb
Product Width:
9 in
Radius:
12 in
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 vertical tee down
Product Details:
Series 2-5 vertical tee down
Product Material:
Aluminum

B-LINE 4A-09-VT12 – Frequently Asked Questions

1) What does the B-Line 4A-09-VT12 vertical tee down fitting actually do in a cable tray run?
It is a three-way cable tray fitting that takes a straight run and drops a branch vertically downward while the main run continues through. The 4A-09-VT12 is a Series 2-5 vertical tee down in aluminum, built for 9 inch wide tray with a 4 inch side rail height, and the drop is formed on a 12 inch radius so cable bend radius is maintained through the turn.
2) Is the B-Line 4A-09-VT12 vertical tee down UL listed for use in an electrical installation?
It is UL Classified. That is the standard basis inspectors look for on cable tray and tray fittings used as a support system for electrical cable.
3) Aluminum or steel cable tray fittings - which should I use for an outdoor or corrosive run?
The 4A-09-VT12 is aluminum, which is the usual choice outdoors, in wash-down areas, and anywhere weight on the supports matters, since it resists corrosion without coating and is lighter than steel. Steel tray is chosen where higher load capacity or lower cost per foot drives the job. Whichever you pick, keep the fittings and the straight sections in the same material and series so the splice plates and hardware match.
4) What is the exact part number to order for a 9 inch, 4 inch deep aluminum vertical tee down?
Order B-Line (Eaton) part 4A-09-VT12. Reading the number: 4A is the 4 inch aluminum rail, 09 is the 9 inch tray width, VT is vertical tee, and 12 is the 12 inch radius.
5) Do I need a vertical tee down or a vertical elbow for my tray drop?
Use a vertical tee down like the 4A-09-VT12 when the main horizontal run has to continue straight past the point where a branch drops away. If the run simply turns down and stops going forward, that is a vertical elbow, not a tee. Both come on a stated radius, and this one is 12 inches.
6) How much does the 4A-09-VT12 tee weigh and how big is it for handling and support spacing?
It weighs 10 lb and measures 4 in height by 15 in length by 9 in width. That is a one-hand piece on a lift, but as with any tray fitting it still needs hangers or trapeze supports on both the horizontal approach and the vertical drop rather than hanging off the adjoining straight sections.
How fast can I get the B-LINE 4A-09-VT12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-09-VT12 come with a warranty?
Absolutely. The B-LINE 4A-09-VT12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-09-VT12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-09-VT12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!