B-Line Eaton series meter s, 2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5,402.74
Image coming soon

B-Line Eaton series meter s, 200 A, Single meter position, Ring type, 3R, Overhead, ANSI 61 gray painted, AW Hub, 010 kAIC, #6 - 250 MCM, MCB, Galvani

(No reviews yet) Write a Review

Model: 2M11R F

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5,402.74
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton B-Line series meter breakers, 200 A, Single meter position, Ring type, 3R, Overhead, ANSI 61 gray painted, AW Hub, 010 kAIC, #6 - 250 MCM, MCB, Galvanized steel, Flush mount, 4 jaws, 3 wires, 1 phase, 1Ø/3W

Manufacturer Resources

Product Specs

Amperage Rating:
200A
Application:
Single meter position
Bus Material:
Aluminum
Certifications:
UL
Compliances:
EUSERC Approved
Interrupt Rating:
10 kAIC
Main Circuit Breaker:
(2) 100 A, 2P
Phase:
Single-phase
Product Height:
32 in
Product Length Depth:
4.63 in
Product Weight:
26 lb
Product Width:
8 in
Voltage Rating:
120/240V
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE 2M11R F – Frequently Asked Questions

1) Will the Eaton B-Line 2M11R F meter breaker work on a 200 amp single-phase residential service?
Yes. The 2M11R F is rated 200 A at 120/240 V, single-phase, and is built as a single meter position socket with 4 jaws, 3 wires, 1 phase (1 phase/3 wire). That is the standard configuration for a 120/240 V single-phase service. It is not a three-phase unit.
2) Does the 2M11R F come with a 200 amp main breaker, or two smaller breakers?
It ships with two 100 A, 2-pole main circuit breakers, not a single 200 A main. The enclosure and meter socket are rated for a 200 A service, with the load split across the two 100 A 2P mains. If your drawing calls for one 200 A main disconnect, this is not the unit.
3) Can this B-Line meter breaker be installed outdoors?
Yes. The 2M11R F carries a 3R enclosure rating, which is the rain-tight outdoor rating used for service equipment on an exterior wall. The housing is galvanized steel finished in ANSI 61 gray paint.
4) Is the 2M11R F meter socket set up for an overhead service drop or underground lateral?
Overhead. It is furnished with an AW hub for the overhead service entrance. For an underground lateral you would need a unit configured for bottom entry instead.
5) Is this a ringless or ring-type meter socket?
Ring type. Utilities differ on which they will accept, and a ring-type socket will not take a ringless cover. Confirm with the serving utility before ordering, since swapping the socket after the fact means pulling the whole unit.
6) Will the 2M11R F pass utility inspection in a EUSERC jurisdiction?
It is listed as EUSERC Approved and UL certified. EUSERC approval is what most western US utilities require on service equipment, so it meets that submittal requirement.
7) What size service conductors will the lugs on this 200 A meter breaker accept?
The line terminations take #6 through 250 MCM conductors, and the bus is aluminum, so AL/CU rated conductors in that range land directly. That range covers typical copper and aluminum 200 A service entrance cable.
8) What rough opening do I need to frame for this flush mount meter breaker?
The unit is 32 in high, 8 in wide, and 4.63 in deep, and it is a flush mount design, so the wall cavity has to accept that 4.63 in depth behind the trim. It weighs 26 lb, so one person can set it.
9) Can I feed two units from this one B-Line meter breaker?
It is a single meter position with two 100 A 2-pole mains, so one meter serves the enclosure and the two breakers can feed two separate 100 A loads or panels. It does not meter those two loads separately. For separate billing you need a multi-position meter stack.
How fast can I get the B-LINE 2M11R F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 2M11R F come with a warranty?
Absolutely. The B-LINE 2M11R F is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 2M11R F?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 2M11R F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.