Eaton B-Line series strut channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, K06 Hole pattern, B54 channel type, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B54
- Hole Pattern:
- K06
- Material Gauge:
- 14 Gauge
- Product Height:
- .81 in
- Product Length Depth:
- 240 in
- Product Weight:
- 19.4 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- DURA GREEN
- Product Material:
- Steel
- Product Length:
- 240 in
B-LINE B54KO6-240GRN – Frequently Asked Questions
1) What size is B-Line B54 strut channel, and will it fit standard 1-5/8 inch strut fittings?
The B54 channel measures 1.62 inches wide by .81 inches high, which is the standard 1-5/8 inch by 13/16 inch shallow strut profile. Fittings, nuts and clamps built for 1-5/8 inch strut seat in the throat the same way they do on any other half-height channel of that width.
2) What part number do I order to match existing green B-Line shallow strut in my building?
Order B54KO6-240GRN. That designation breaks down as B54 channel type, K06 knockout pattern, 240 inch length, GRN for the DURA GREEN finish. If the existing run is the same 1.62 by .81 inch profile in green, this matches it and your existing strut nuts and fittings carry over.
3) What does the K06 hole pattern on this B-Line strut channel mean?
K06 is a knockout pattern punched in the back of the channel rather than a solid or continuous-slot back. The knockouts let you bolt the channel flat to a wall, deck or beam at set intervals without drilling, and they give you pass-through points for threaded rod or anchors along the 240 inch run.
4) What is the DURA GREEN finish on B-Line strut, and can I use it outdoors or in a damp area?
DURA GREEN is B-Line's green epoxy-type coating over the 14 gauge steel channel, used where a painted or coated surface is wanted over plain or plated steel. It holds up in damp interior and covered service areas. For direct weather exposure or corrosive process environments, specify hot dip galvanized or stainless channel instead.
5) Does B-Line B54 strut channel come with nuts, bolts or brackets?
No. It is bare channel only, a 240 inch stick of 14 gauge steel. Strut nuts, end caps, closure strip, post bases, beam clamps, threaded rod and any angle or corner fittings are separate line items. Count your connection points before you order so the channel is not sitting on the job waiting on hardware.
6) Can I weld or cut this strut channel on site?
It is plain steel, 14 gauge, so it cuts with a bandsaw, chop saw or portable band and can be welded. Cutting or welding burns off the DURA GREEN coating at the cut, so touch up the exposed edge if the location sees any moisture.
How fast can I get the B-LINE B54KO6-240GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B54KO6-240GRN come with a warranty?
Absolutely. The B-LINE B54KO6-240GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B54KO6-240GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B54KO6-240GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.