You may also like
B-Line Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Th
Model: BLN-B141HDG
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$4,220.30
B-Line Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Aluminium, Three hole splice plate | Pre assembled
Model: BLN-B141AL
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Aluminium, Three hole splice plate | Pre assembled, Thickness 1/4 in, Aluminum
B-LINE
$4,174.50
B-Line B141PAZN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
Model: BLN-B141PAZN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Electro-plated
B-LINE
$97.39
$55.98
B-Line Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in,
Model: BLN-B141GRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate, Thickness 1/4 in, DURA GREEN
B-LINE
$3,198.55
B-Line B141PAGRN Eaton series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
Model: BLN-B141PAGRN
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, DURA GREEN
B-LINE
$97.84
$55.98
Eaton B-Line series strut fittings and accessories, .23" Height, 5.37" Length, 1.62" Width, .55lbs, Steel, Three hole splice plate | Pre assembled, Thickness 1/4 in, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- .23 in
- Product Length Depth:
- 5.37 in
- Product Weight:
- .55 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Plates
- Product Type:
- Three hole splice plate,Pre assembled
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Three hole splice plate,Pre assembled
- Product Material:
- Steel
B-LINE B141YZN – Frequently Asked Questions
1) What is the Eaton B-Line B141YZN splice plate used for?
The B141YZN is a three hole splice plate for joining strut channel end to end, keeping a run continuous where one length stops and the next begins. It is steel, 1/4 inch thick, and ships pre assembled, so the hardware comes with the plate rather than being ordered separately.
2) Do I need to buy separate strut nuts and bolts with the B141YZN?
No. The B141YZN is supplied pre assembled, so the fastening hardware comes with the plate. You are ordering one splice point complete, not a bare plate.
3) Is the yellow zinc chromate finish on this B-Line plate okay for outdoor use?
Yellow zinc chromate is a plated finish for dry, indoor and protected environments, which is what the B141YZN carries. For wet, washdown or exterior runs, step up to a hot dip galvanized or stainless splice plate in the same three hole pattern instead.
4) What is the exact part number to order this B-Line splice plate?
Order Eaton B-Line part number B141YZN. The YZN suffix denotes the yellow zinc chromate finish; the same plate is produced in other finishes under different suffixes, so quote the full designation when specifying.
5) How many bolts hold each side of a three hole splice plate?
With three holes total on a 5.37 inch plate, the connection is split across the joint, so one channel end takes two fasteners and the other takes one, or the plate is centered per the layout on your drawing. If your spec calls for a fully symmetrical four bolt splice, use a four hole plate rather than this one.
6) Does the B141YZN splice plate carry any listings or certifications?
Certifications are marked Not Applicable for the B141YZN. It is a mechanical strut fitting, so specify it on material grade and dimensions rather than on a listing mark.
How fast can I get the B-LINE B141YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B141YZN come with a warranty?
Absolutely. The B-LINE B141YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B141YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B141YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.