Eaton B-Line series strut fittings and accessories, 3.5" Height, 12" Length, 1.62" Width, 2.84lbs, Steel, Clevis bracket, channel opening downward, Uniform load capacity 800 lbs, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 12 in
- Product Weight:
- 2.84 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Clevis bracket, channel opening downward
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Clevis bracket, channel opening downward
- Product Material:
- Steel
- Product Length:
- 12 in
B-LINE B198A-12HDG – Frequently Asked Questions
1) How much load can the B-Line B198A-12HDG clevis bracket carry?
The B198A-12HDG clevis bracket is rated for a uniform load of 800 lbs. That is a uniform load figure, so concentrated point loads at the free end of the 12 inch arm will not carry the same value. The bracket itself weighs 2.84 lbs, which is worth adding into your hanger calculation on long runs.
2) Which way does the channel face on the B198A-12HDG bracket?
The channel opening faces downward on the B198A-12HDG. That matters because your strut nuts and spring nuts load into the open side, so with the opening down you attach hangers, rod, and trapeze components from below the bracket rather than from the top face.
3) Can the B-Line B198A clevis bracket be used outdoors or in a wet area?
Hot-dipped galvanized steel, so it suits outdoor, damp, and unconditioned locations such as rooftops, parking structures, and mechanical yards. Pair it with galvanized strut and galvanized hardware so you are not mixing finishes and setting up galvanic corrosion at the connection.
4) Do I get the threaded rod and nuts with the B198A-12HDG clevis bracket?
You are buying the bracket alone, a 12 inch galvanized steel clevis bracket. Rod, strut nuts, bolts, washers, and any anchors into the deck or structure are separate line items. For an outdoor run, order those in galvanized to match the bracket finish.
5) Is the B-Line B198A-12HDG bracket rated or listed to any standard?
The B198A-12HDG is a structural mounting bracket in Eaton's B-Line strut fittings line, and it is catalogued with certifications marked Not Applicable. Specify it on load capacity and finish rather than on a listing mark.
How fast can I get the B-LINE B198A-12HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B198A-12HDG come with a warranty?
Absolutely. The B-LINE B198A-12HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B198A-12HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B198A-12HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.