You may also like
B-Line Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90
Model: BLN-B236LGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, DURA GREEN
B-LINE
$6,629.50
B-Line B236RZN Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Electro-plated
Model: BLN-B236RZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Electro-plated
B-LINE
$96.84
$63.66
B-Line B236RGRN Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, DURA GREEN
Model: BLN-B236RGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, DURA GREEN
B-LINE
$99.09
$65.59
B-Line B236RSS4 Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Stainless steel type 304
Model: BLN-B236RSS4
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Stainless steel type 304
B-LINE
$198.67
B-Line B236RSS6 Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Stainless steel type 316
Model: BLN-B236RSS6
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Stainless steel type 316
B-LINE
$352.99
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 2.06 in
- Product Weight:
- .65 lb
- Product Width:
- 1.87 in
- Department:
- Electrical
- Product Type:
- Right hand three hole offset bent angle, 90 deg
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Right hand three hole offset bent angle, 90 deg
- Product Material:
- Steel
B-LINE B236RHDG – Frequently Asked Questions
1) Is the Eaton B-Line B236RHDG bent angle right hand or left hand?
B236RHDG is the right hand version of the three hole offset bent angle. Handing on an offset fitting matters because the offset leg breaks to one side only, so a left hand opening needs the left hand part number instead. Figure out which way your strut run turns before you order.
2) Can the B-Line B236RHDG angle fitting be used outdoors or in a wet area?
The finish is hot-dipped galvanized steel, which is the finish B-Line uses for exterior, damp, and corrosive locations. Plain electro-galvanized fittings are the indoor dry equivalent, so if this is a rooftop, parking structure, tunnel, or wash-down area, the hot-dipped part is the one you want.
3) What does a three hole offset bent angle do that a flat 90 degree angle bracket doesn't?
An offset bent angle puts a step in the bracket so the two strut runs it joins sit in different planes rather than face to face. That is what you reach for when the connecting channel has to clear the first run, a flange, or a wall surface. A straight 90 degree corner angle keeps both members in the same plane. The B236RHDG is the offset type, bent at 90 degrees, with three bolt holes.
4) Do bolts, nuts, or channel nuts come with the B-Line B236RHDG bracket?
You get the steel bracket only. Strut fittings are sold bare, so order your channel nuts, hex head bolts, and washers separately, and match the hardware finish to the hot-dipped galvanized bracket so you are not mixing coatings in a corrosive location.
5) What is the Eaton B-Line part number for this right hand offset angle?
Order it as B236RHDG from Eaton's B-Line series. The RHDG suffix reads as right hand, hot-dipped galvanized. The UPC on the carton is 781011859954.
How fast can I get the B-LINE B236RHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B236RHDG come with a warranty?
Absolutely. The B-LINE B236RHDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B236RHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B236RHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.