You may also like
B-Line B281FLZN Eaton series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Electro-plated
Model: BLN-B281FLZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Electro-plated
B-LINE
$291.26
B-Line B281AFLHDG Eaton series strut fittings and accessories, 1.62" Height, 8" Length, 3" Width, 2.5lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Hot-dipped galvanized
Model: BLN-B281AFLHDG
Eaton B-Line series strut fittings and accessories, 1.62" Height, 8" Length, 3" Width, 2.5lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Hot-dipped galvanized
B-LINE
$501.50
B-Line B281FLSS4 Eaton series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Stainless steel type 304
Model: BLN-B281FLSS4
Eaton B-Line series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Stainless steel type 304
B-LINE
$734.90
B-Line Eaton series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channe
Model: BLN-B281FLGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, DURA GREEN
B-LINE
$30,371.86
B-Line B281HDG Eaton series strut fittings and accessories, 3.5" Height, 6" Length, 6" Width, 4.00lbs, Steel, Square post base, centered offset, Fits channel type B22A, B, C, Hot-dipped galvanized
Model: BLN-B281HDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 6" Length, 6" Width, 4.00lbs, Steel, Square post base, centered offset, Fits channel type B22A, B, C, Hot-dipped galvanized
B-LINE
$406.99
Eaton B-Line series strut fittings and accessories, 3.5" Height, 8" Length, 3" Width, 3.2lbs, Steel, Rectangular post base, flush to side, Fits channel type B22A, B, C, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B22A, B, C
- Product Height:
- 3.5 in
- Product Length Depth:
- 8 in
- Product Weight:
- 3.2 lb
- Product Width:
- 3 in
- Department:
- Electrical
- Product Type:
- Rectangular post base, flush to side
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Rectangular post base, flush to side
- Product Material:
- Steel
B-LINE B281FLHDG – Frequently Asked Questions
1) Which strut channel does the B-Line B281FLHDG post base fit?
The B281FLHDG rectangular post base fits B-Line channel types B22A, B and C. If the strut you are standing up is a different B-Line profile, this base is not the right fitting for it.
2) Is the B-Line B281FLHDG post base suitable for outdoor or wet locations?
It is steel with a hot-dipped galvanized finish, which is the finish normally specified for exterior, rooftop and damp indoor runs where plain or electro-plated fittings would rust at the base. Since a post base sits on the deck or slab where water collects, the hot-dip coating is the reason to pick this version over a plain finish.
3) What does flush to side mean on a B-Line rectangular post base?
Flush to side means the strut sits off to one edge of the base plate rather than centered on it, so one face of the post lines up with the edge of the base. That matters when you are setting a post tight against a curb, wall or equipment pad and need the channel face, not the plate, to be the reference line. Center-mount bases are the alternative when the post needs to be in the middle of the footprint.
4) What is the footprint of the B281FLHDG post base?
The B281FLHDG measures 8 inches length/depth, 3 inches width and 3.5 inches height, and weighs 3.2 lb. Use the 8 by 3 inch footprint when you are laying out anchor spacing on a slab or checking clearance against a curb.
5) Do anchors and bolts come with the B-Line B281FLHDG post base?
The B281FLHDG is supplied as the post base fitting only. Concrete anchors or deck fasteners to secure the base, and the channel nuts and bolts to attach the strut post, are ordered separately and sized to your substrate. For an exterior install, match the fastener finish to the hot-dipped galvanized base so you do not set up dissimilar-metal corrosion at the deck.
How fast can I get the B-LINE B281FLHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B281FLHDG come with a warranty?
Absolutely. The B-LINE B281FLHDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B281FLHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B281FLHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.