Eaton B-Line series strut pipe clamps and accessories, .06" height, 2.396" length, 1.25" width, 400 lbs, Steel, Pre-assembled combination recess hex head screw, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Load Capacity:
- 400 lbs
- Product Height:
- .06 in
- Product Length Depth:
- 2.396 in
- Product Weight:
- .11 lb
- Product Width:
- 1.25 in
- Special Features:
- Pre-assembled combination recess hex head screw
- Department:
- Electrical
- Product Material:
- Steel
B-LINE B2008PAYZN – Frequently Asked Questions
1) Does the B-Line B2008PAYZN pipe clamp come with the hardware, or do I have to order the screw and strut nut separately?
It ships with a pre-assembled combination recess hex head screw, so the fastener is already on the part when it comes out of the box. That saves an install step on a ladder, and the recess hex head means you can drive it with either a nut driver or a screwdriver bit.
2) Is the yellow zinc chromate finish on this B-Line strut clamp OK for a damp or outdoor location?
Yellow zinc chromate over steel is a plated coating suited to dry indoor and protected interior runs. It is not a hot-dip galvanized or stainless finish, so for exposed outdoor, wet, or corrosive areas (wash-down, coastal, chemical) specify a galvanized or stainless clamp instead.
3) Which part number do I give my supplier for this B-Line yellow zinc strut pipe clamp?
Order it as Eaton B-Line B2008PAYZN. That single catalog number covers the steel clamp, the yellow zinc chromate finish, and the pre-assembled screw, so there is no separate finish or hardware suffix to specify.
4) Is a strut pipe clamp the right choice, or should I be using a hanger or a conduit strap?
A strut clamp like the B2008PAYZN is for runs already supported on channel strut, where the clamp bolts to the strut and holds the pipe against it. If you are fastening directly to a wall or deck with no strut, a one-hole or two-hole conduit strap is the correct part. If the pipe has to hang below structure, use a rod-mounted hanger. Strut clamps make sense when you have multiple parallel runs sharing one piece of channel and want each line clamped independently.
5) What size is the Eaton B-Line B2008PAYZN clamp?
Dimensions are 2.396 x 1.25 x .06 inches, and each piece weighs .11 lb. The .06 inch material thickness and 1.25 inch width are what matter when you are checking clearance between adjacent clamps on a crowded strut run, and the light weight is why boxed quantities stay manageable for a full floor of conduit.
How fast can I get the B-LINE B2008PAYZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2008PAYZN come with a warranty?
Absolutely. The B-LINE B2008PAYZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2008PAYZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2008PAYZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.