Eaton B-Line series wall mounted panel enclosure, 30" height, 12" length, 24" width, NEMA 4X, Hinged cover, 4XSS63PT enclosure, Wall mount, Medium single door, External mounting feet, 316 stainless steel, Seamless poured in-place gasket
Manufacturer Resources
Product Specs
- Certifications:
- UL 508A
- Closure Type:
- Hinged
- Country Of Origin:
- United States
- Cover Type:
- Hinged
- Finish Color:
- #4 brushed
- Locking Provisions:
- Key lock padlock provision
- Mounting Hole Details:
- External mounting feet
- Mounting Method:
- Wall
- Nema Rating:
- 4X
- Product Height:
- 30 in
- Product Length Depth:
- 12 in
- Product Weight:
- 69.5 lb
- Product Width:
- 24 in
- Special Features:
- 3-pt latching handle
- Wall Thickness:
- 14 gauge
- Department:
- Electrical
- Product Model:
- 4XSS63PT enclosure
- Product Color:
- Grey
- Product Style:
- Medium single door
- Product Material:
- 316 stainless steel
B-LINE 302412-4XSS63PT – Frequently Asked Questions
1) Is a NEMA 4X stainless enclosure like the Eaton B-Line 302412-4XSS63PT OK for washdown and outdoor coastal use?
Yes. The 4XSS63PT is built to NEMA 4X, which covers hosedown, windblown dust and rain, and corrosion resistance, and the body is 316 stainless steel with a seamless poured in-place gasket. The 316 alloy is the reason it holds up in chloride environments like coastal sites, food plants and wastewater, where 304 stainless pits sooner.
2) How heavy is this stainless enclosure, and can one person hang it?
69.5 lb empty. That's a two-person lift to get it onto the wall, and the anchors need to carry that plus whatever panel, breakers or drives you mount inside. It hangs on external mounting feet, so the fasteners go outside the sealed body and you don't breach the 4X envelope to mount it.
3) Can I use this enclosure for an industrial control panel build?
Yes, it carries UL 508A, the standard for industrial control panels, so it's the right shell for a motor control or PLC panel build. Wall thickness is 14 gauge 316 stainless.
4) Does it come with a back panel or mounting rails inside?
No sub-panel is included with the 302412-4XSS63PT. What's listed is the enclosure itself: 316 stainless body, hinged single door with a 3-point latching handle, poured in-place gasket, and external mounting feet. Order the back panel, DIN rail, and any gland plates or hole seals separately.
5) Can this enclosure be locked out or padlocked for LOTO?
Yes. The door has a key lock and padlock provision, operated through a 3-point latching handle, so a maintenance padlock can be applied for lockout. The 3-point mechanism also pulls the tall door in evenly against the gasket top, middle and bottom, which is what keeps the 4X seal on a 30 inch door.
6) What are the actual box dimensions of the B-Line 302412-4XSS63PT enclosure?
It's a 30 inch high by 24 inch wide by 12 inch deep single-door enclosure. The model number reads the same way: 30-24-12. Plan wall space beyond the 24 inch width for the hinged door swing, and note the mounting feet stand the box off the wall surface.
7) Will drilling conduit holes in the top void the NEMA 4X rating?
Top penetrations are the weak point on a 4X box. Any hole you cut has to be closed with a 4X rated hub or fitting, and the rating only holds if every entry is sealed to that level. Standard practice is to bring conduit into the bottom or side of the 30 by 24 by 12 body and leave the top intact. The factory seal on the door itself is a seamless poured in-place gasket, so the door side needs nothing added.
8) Should I buy 316 stainless or is painted steel NEMA 4 enough for my location?
If the enclosure lives indoors, dry, away from chemicals and salt, a painted steel NEMA 4 box does the job for less. Go to a 316 stainless 4X body like the 4XSS63PT when there is washdown, chlorides, salt air, or corrosive process chemistry, because that is where painted steel fails at the seams and fasteners first. The 4X rating is specifically the corrosion-resistant tier of NEMA 4.
9) What finish is the stainless, and will it match other enclosures already on my skid?
The exterior is a #4 brushed stainless finish, the standard directional grain used across industrial stainless enclosures, so it lines up visually with other brushed 304 or 316 boxes already installed. It is unpainted stainless, not a painted grey box.
10) What is the exact part number to order this Eaton B-Line enclosure, and where is it made?
Order it as 302412-4XSS63PT, an Eaton B-Line series 4XSS63PT wall mount enclosure. Country of origin is the US.
How fast can I get the B-LINE 302412-4XSS63PT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 302412-4XSS63PT come with a warranty?
Absolutely. The B-LINE 302412-4XSS63PT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 302412-4XSS63PT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 302412-4XSS63PT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.