B-Line Eaton series wireway, 2.5" height, 60" length, 2.5" width, G wireway, Thru holes, 23 top knockouts, 23 bottom knockouts, Screw cover, 1, Steel

Yes, the 2260 G is a NEMA 1 enclosure, so it's for indoor, dry locations only. It won't keep out dripping water, hose-down, or weather. For an outdoor run or a wash-down area you need a NEMA 3R or 4 raintight wireway instead. It is also CSA Certified.

It's a 2-1/2 by 2-1/2 inch trough, 60 inches long, in 16 gauge steel weighing 10.686 lb. That 2-1/2 inch square section is the smallest common wireway size, so it suits short feeder taps, control wiring, and light branch-circuit gutter work rather than large multi-circuit pulls. Step up to a 4x4 body if you're filling more than a handful of conductors.

The 2260 G comes with 23 knockouts on the top and 23 on the bottom, so conduit entries along the run are already provided and you only punch or drill if you need an entry somewhere else. Pick the knockouts you need and leave the rest closed.

Screw cover, secured with plated screws. That means you back out the screws along the full 60 inch length to open it, which is fine for a one-time pull but slower than a hinged cover if you expect to get back into the trough often. Plan on the tool access above or beside the run.

Order Eaton B-Line model 2260 G. That single number covers the 2-1/2 by 2-1/2 inch, 60 inch screw-cover NEMA 1 steel trough in ANSI 61 gray.

No. The 2260 G is the 60 inch straight trough with its screw cover only. Couplings, end plates, elbows, tees, and mounting fasteners are separate items, so size those in the same 2-1/2 inch G series to keep the run continuous.

It's finished in ANSI 61 gray, the standard gray used on most industrial panelboards, enclosures, and gutter. It will read as a match next to typical switchgear and existing wireway runs on a commercial or industrial job.