You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, combo opening, NEMA 1 rated, Steel, ANSI 61 gray painted, 12" X 12"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 12 in
- Product Length Depth:
- 13.758 in
- Product Weight:
- 8.682 lb
- Product Width:
- 12 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, combo opening
- Product Details:
- 90° elbow, combo opening
- Product Material:
- Steel
B-LINE 121245 HSLCOMBO – Frequently Asked Questions
1) Will this B-Line 90 degree wireway elbow fit 12 x 12 lay-in wireway?
Yes. The Eaton B-Line 121245 HSLCOMBO elbow is sized for 12 inch by 12 inch wireway, with a 12 in height and 12 in width and a 13.758 in length/depth through the body. It is a lay-in wiring method fitting, so it matches lay-in trough of the same 12 x 12 cross section. It will not adapt a 12 x 12 run down to a 6 x 6 or 8 x 8 trough.
2) Is this wireway elbow rated for outdoor or wet locations?
No. It is a NEMA 1 rated fitting, which is indoor, general purpose only: it guards against contact with the enclosed conductors and falling dirt, but gives no protection against rain, washdown, or dust. For a rooftop, yard, or washdown area you need a NEMA 3R or NEMA 4 wireway and matching fittings instead.
3) What does a combo opening elbow do that a standard 90 degree wireway elbow doesn't?
The combo opening on this 90 degree elbow gives you more than one usable face, so a single fitting can serve a turn that would otherwise need a specific left, right, or up/down elbow. For a contractor stocking a job, that means fewer distinct fittings on the truck to make the corners in a 12 x 12 lay-in run.
4) Do I need to pull conductors through this elbow or can they be laid in?
Lay-in. The cover comes off and conductors drop into the elbow rather than being fished through, which is the point of a lay-in wireway system and the reason it is used for large multi-circuit gutter runs. Cover hardware for a 12 x 12 lay-in trough is what you use to close it back up.
5) What finish does this B-Line wireway elbow come in, and will it match existing gray wireway?
It is steel with an ANSI 61 gray painted finish, which is the standard gray used across most industrial wireway, panelboards, and control enclosures. If your existing trough is ANSI 61 gray B-Line or comparable, the elbow will match the run visually.
6) How much does a 12 x 12 wireway elbow weigh for overhead support planning?
This fitting weighs 8.682 lb on its own. Add that to the trough weight and conductor fill when you lay out trapeze hangers or strut supports at the corner, since a turn is usually where the run needs a dedicated support point.
How fast can I get the B-LINE 121245 HSLCOMBO delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 121245 HSLCOMBO come with a warranty?
Absolutely. The B-LINE 121245 HSLCOMBO is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 121245 HSLCOMBO?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 121245 HSLCOMBO from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.