You may also like
Eaton B-Line series wireway elbow fitting, Lay-in, 90° elbow, outisde opening, NEMA 1, Steel, ANSI 61 gray painted finish, 8" X 8"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 8 in
- Product Length Depth:
- 8 in
- Product Weight:
- 9.139 lb
- Product Width:
- 12.294 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° elbow, outisde opening
- Product Details:
- 90° elbow, outisde opening
- Product Material:
- Steel
B-LINE 88 HSLOUT – Frequently Asked Questions
1) Will the B-Line 88 HSLOUT elbow fit 8 x 8 wireway?
Yes. The 88 HSLOUT is sized for 8 inch by 8 inch lay-in wireway, matching an 8 inch height and 8 inch depth at the openings. Overall the fitting measures 12.294 inches wide and weighs 9.139 lb, so plan the run length and support accordingly.
2) What does outside opening mean on a 90 degree wireway elbow, and how do I know if I need it instead of an inside opening?
An outside opening 90 degree elbow turns the wireway with the access cover on the outside of the turn, the long side of the corner. Inside opening elbows put the cover on the short side. Pick based on which face you can reach once the wireway is mounted: if the run turns away from the wall or obstruction and the outer face of the corner is accessible, the 88 HSLOUT outside opening elbow is the one to order.
3) Is this B-Line elbow suitable for outdoor or washdown locations?
No. The 88 HSLOUT carries a NEMA 1 degree of protection, which is indoor, general purpose only, with no protection against water or dust ingress. For wet, outdoor, or hosedown areas you need NEMA 3R, 4, or 4X rated wireway and fittings instead.
4) Can I lay conductors into this elbow instead of pulling them through?
Yes, it is a lay-in fitting. The cover comes off so conductors drop into the corner and get laid around the turn, then the cover goes back on. That is the main reason to use wireway over conduit at a 90 on a large feeder or a control run, since it avoids a hard pull at the corner.
5) Does the finish on this elbow match standard gray wireway sections?
It is painted ANSI 61 gray over steel, the same standard gray used across B-Line lay-in wireway, so a corner added to an existing run will match rather than stand out. ANSI 61 is also the common gray on switchgear and control enclosures, which keeps a panel room consistent.
6) Does this wireway elbow come with a cover and the hardware to join it to the wireway?
The 88 HSLOUT is a lay-in fitting, so it ships as the elbow body with its removable cover. Connectors and any additional mounting or support hardware for the run are separate items, so add those to the order if you do not already have them on the job.
How fast can I get the B-LINE 88 HSLOUT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 88 HSLOUT come with a warranty?
Absolutely. The B-LINE 88 HSLOUT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 88 HSLOUT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 88 HSLOUT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.