You may also like
Eaton B-Line series wireway end, 1.50 inch Knockout, Wireway end, NEMA 1, Steel, ANSI 61 gray painted, 2.5" X 2.5"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 2.5 in
- Product Length Depth:
- 2.5 in
- Product Weight:
- .229 lb
- Product Width:
- 2.4 in
- Special Features:
- 1.50 inch knockout
- Department:
- Electrical
- Product Type:
- Wireway end
- Product Details:
- Wireway end
- Product Material:
- Steel
B-LINE 22 HSE – Frequently Asked Questions
1) Will the B-Line 22 HSE wireway end fit a 2-1/2 inch square wireway?
Yes. The Eaton B-Line 22 HSE is sized for 2.5 x 2.5 inch wireway, with a stated height of 2.5 in and length/depth of 2.5 in. It closes off the open end of a run of that trough size. If your wireway is 4x4 or 6x6, this end plate is the wrong size.
2) Does the 22 HSE wireway end come with a knockout, and what size conduit does it take?
It has a 1.50 inch knockout in the plate. Punched out, that opening takes a 1-1/2 inch trade size conduit fitting, so you can bring a raceway straight into the end of the trough without drilling. Leave it intact and the end is closed.
3) Is this B-Line wireway end suitable for a NEMA 1 indoor installation?
Yes. The 22 HSE is rated degree of protection 1, matching NEMA 1 wireway for indoor, dry locations. It is not a raintight or NEMA 3R part, so don't use it on an outdoor or wash-down run.
4) Is the B-Line 22 HSE wireway end UL Listed?
The 22 HSE end plate is UL Listed, which is what most inspectors and institutional specs want to see on a wireway system component.
5) What is this wireway end made of and will the finish match my existing gray trough?
Steel, painted ANSI 61 gray, which is the standard gray used across Eaton B-Line NEMA 1 wireway and most panel gear. It'll blend with an existing ANSI 61 run rather than standing out as a patch.
6) What exactly does a wireway end do, and do I need one on each end of the run?
A wireway end is the closure plate that caps an open end of a square duct run. The B-Line 22 HSE caps a 2.5 x 2.5 inch trough and carries a 1.50 inch knockout if you want to feed conduit through it. Any end of the run that doesn't land on a box, panel, or another fitting needs one, so count your open ends and order accordingly.
7) How heavy is the 22 HSE end plate?
Light: .229 lb each. Carrying a box of them up a lift or stocking them on a service van is no issue.
How fast can I get the B-LINE 22 HSE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 22 HSE come with a warranty?
Absolutely. The B-LINE 22 HSE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 22 HSE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 22 HSE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.