Eaton B-Line series wiring trough, 8" height, 12" length, 8" width, HSNK wireway, Thru holes, No knockouts, Hinged cover, NEMA 1, Steel, Hinged, ANSI 61 gray, 14 gauge
Manufacturer Resources
Product Specs
- Certifications:
- CSA C22.2.
- Closure Type:
- Hinged
- Finish Color:
- ANSI 61 gray
- Material Thickness:
- 14 gauge
- Mounting Method:
- Thru holes
- Product Height:
- 8 in
- Product Length Depth:
- 12 in
- Product Weight:
- 7.008 lb
- Product Width:
- 8 in
- Special Features:
- Cover is secured to the body with plated screws
- Department:
- Electrical
- Product Type:
- HSNK wireway
- Product Details:
- HSNK wireway
B-LINE 8812 HSNK – Frequently Asked Questions
1) What size is the Eaton B-Line 8812 HSNK wiring trough?
The 8812 HSNK trough is an 8 x 8 inch cross section, 12 inches long. That 8 x 8 opening is what determines how much conductor fill you can run through it, and the 12 inch length makes it a short jumper or pull section rather than a full run.
2) Is the 8812 HSNK trough rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure, which is indoor general purpose only. It gives protection against incidental contact and falling dirt, not rain, washdown, or dust. For an outdoor run you need a NEMA 3R raintight wireway instead.
3) Does the B-Line 8812 HSNK wireway come with knockouts for conduit?
No knockouts. The body is supplied blank, so every conduit entry gets punched or hole sawed in the field wherever your run lands. Budget time for that and for the connectors, which are not included.
4) How does the cover open on the 8812 HSNK trough, and can I get at the wiring after install?
It's a hinged cover, so the lid swings open for pulling and terminating instead of lifting away completely. The cover is secured to the body with plated screws, so you back those out and the hinge holds the cover on the trough while you work. Handy where the trough is mounted high or over equipment and a loose lid would be a nuisance.
5) Is this wireway approved for Canadian jobs?
The 8812 HSNK carries CSA C22.2 certification, so it can be specified on work requiring CSA listed enclosures.
6) What gauge steel is the 8812 HSNK trough, and what finish is it?
14 gauge steel, painted ANSI 61 gray. That is the standard industrial gray used on most panelboards and control enclosures, so it matches gear already on the wall in a typical plant or mechanical room.
How fast can I get the B-LINE 8812 HSNK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 8812 HSNK come with a warranty?
Absolutely. The B-LINE 8812 HSNK is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 8812 HSNK?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 8812 HSNK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.