You may also like
Eaton D26 Series Rear Pole Separate Contact for D26 Relays
Model: EAT-D26MP
Eaton D26 Series Rear Pole Separate Contact for D26 RelaysThe Eaton D26 Series Rear Pole Separate Contact is an auxiliary contact block engineered for use exclusively with D26 series relays, giving...
Eaton
Starting at
$68.26
Eaton D26 Relay Replacement Coil, 240V 60Hz
The Eaton D26 Relay Replacement Coil is a genuine renewal part/accessory engineered to restore proper operation to Eaton D26 series relays. Rated for 240V at 60CY (60Hz), this coil is a direct-fit replacement designed to keep control circuits and relay assemblies running reliably. With compact 4 in x 4 in x 4 in dimensions, it is sized for straightforward drop-in replacement in existing relay housings, making it an efficient solution for maintenance, repair, and panel upgrade work.
Key Features
- Voltage/Frequency Rating: Designed for 240V, 60CY (60Hz) operation, matching standard Eaton D26 relay coil specifications.
- Compact Dimensions: Measures 4 in (width) x 4 in (length/depth) x 4 in (height), supporting straightforward fitment as a renewal component.
- Genuine Renewal Part: Classified as an Eaton Renewal Parts/Accessories item, purpose-built as a replacement coil rather than a general-purpose component.
- D26 Relay Compatibility: Configured specifically for use with Eaton D26 series relays, supporting like-for-like replacement without re-engineering the control circuit.
- Maintenance-Focused Design: Intended to extend the service life of existing relay assemblies by replacing a failed or worn coil rather than the entire relay.
Technical Specifications
- Warranty: Not Applicable
- Department: Electrical
- Product Type: Coil
- Product Width: 4 in
- Product Length/Depth: 4 in
- Product Height: 4 in
- Certifications: Not Applicable
Typical Applications
- Relay Control Circuits in Commercial and Industrial Panels
- Renewal and Replacement Maintenance for Eaton D26 Relays
- Motor Control and Switching Applications
- Electrical Panel Repairs and Upgrades
- Facilities Maintenance for Existing Eaton Relay Installations
Why Eaton?
Eaton renewal parts and accessories are built to restore original equipment performance, giving facilities and contractors a reliable path to repair rather than replace entire relay assemblies. This D26 relay coil is engineered to the 240V, 60CY specification required for consistent, code-compliant operation in professional electrical control systems. Choosing genuine Eaton renewal components helps ensure long-term reliability of existing relay installations.
Manufacturer Resources
Product Specs
- Warranty:
- Not Applicable
- Department:
- Electrical
- Product Height:
- 4 in
- Product Width:
- 4 in
- Certifications:
- Not Applicable
- Product Type:
- Contactor Coil
- Voltage Rating:
- 240V
- Series:
- D26
- Product Group:
- Motor Control & Automation
- Product Subgroup:
- Contactors & Relays
Eaton 9-1989-1 – Frequently Asked Questions
1) Will the Eaton D26 replacement coil work on a 240V 60Hz control circuit?
That's exactly what it's rated for. The Eaton D26 relay coil is built to 240V, 60CY (60Hz) operation, so it drops into a control circuit already running 240V 60Hz without any re-engineering. If your panel runs the relay coil at a different control voltage, this is the wrong coil, you need the version matching that voltage.
2) Which Eaton relays does the 9-1989 coil fit?
It is configured for Eaton D26 series relays specifically. It is a genuine Eaton renewal part, not a general purpose coil, so it is a like-for-like swap into an existing D26 relay housing. It is not intended for other Eaton relay families.
3) I need a replacement contactor coil but my starter is a Square D, not Eaton. What do I use?
The Eaton D26 coil only suits Eaton D26 relays, so it is no help on a Square D starter. For Square D gear, the Square D Type S replacement coil, 31041400 series, covers NEMA size 00, 0 and 1 starters at 24VAC 60Hz. Note the control voltage difference, 24VAC versus 240V on the Eaton part, so confirm what your control transformer is putting out before you order either one.
4) Can I replace just the coil instead of the whole Eaton D26 relay?
Yes, that is the point of this part. The D26 coil is sold as a renewal component so a failed or worn coil can be swapped out and the relay body, contacts and panel wiring stay in place. For facilities maintenance on older Eaton relay installations it saves pulling and rewiring a complete relay.
5) There are two configuration options on the Eaton D26 coil, what do I order?
Two coil configurations are offered, ordered as part numbers 9-1989-1 and 9-1989-2. Both are 240V 60Hz D26 coils, so match the configuration to the coil currently in your relay, the number stamped on the old coil or on the relay nameplate is the quickest way to pin it down.
6) How much space do I need in the panel for the Eaton D26 relay coil?
The coil is a 4 x 4 x 4 inch item, so figure on that envelope when you are checking clearance in an existing relay housing or enclosure. It is sized as a drop-in for the D26 relay it belongs to.
7) Is the Eaton D26 coil suitable for motor control and switching work?
Yes. Typical use is relay control circuits in commercial and industrial panels, motor control and switching, and general panel repair or upgrade work where an existing Eaton D26 relay needs its coil renewed.
How fast can I get the Eaton 9-1989-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 9-1989-1 come with a warranty?
Absolutely. The Eaton 9-1989-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 9-1989-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton 9-1989-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.