You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Amperage Rating:
- 800A
- Extension Size:
- 8.41 in back of breaker
- Frame Size:
- M-frame
- Series:
- Series C
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Stud Accessories
- Product Type:
- Rear Connected studs
- Product Details:
- Rear Connected studs
B-LINE 314C960G11 – Frequently Asked Questions
1) What is the Eaton B-Line 314C960G11 used for on a molded case breaker?
The 314C960G11 is a rear connected stud kit for Eaton Series C molded case circuit breakers. Instead of landing cable on the front of the breaker, the studs pass through the back so the breaker can be bolted to bus or cable connections behind the mounting pan. It is an accessory kit, not a breaker.
2) Which Eaton breaker frame does the 314C960G11 stud kit fit?
M-frame Series C breakers. The kit is rated 800A, so it matches M-frame applications at that ampere rating. It will not suit a different frame class, an F, J, K or N frame takes its own stud kit.
3) How far do the 314C960G11 rear studs extend behind the breaker?
8.41 inches back of the breaker. That extension length is what you need to check against the depth of your enclosure or switchboard cell before ordering, since the studs have to clear the mounting pan and still leave room to land the bus or lug behind it.
4) Can I use an 800A rear stud kit on a lower ampere Series C breaker?
No. The 314C960G11 is built for 800A M-frame Series C breakers and the stud size and spacing follow that rating. A 600A or smaller M-frame breaker uses the stud kit matched to its own ampere rating. Match the kit to the breaker's frame and amp rating, not just the series.
5) Should I specify rear connected studs or stick with front connections on an 800A M-frame breaker?
Rear connection makes sense when the breaker feeds vertical bus in a switchboard or panel and you want the connection behind the mounting pan for a cleaner, deeper-mounted assembly. Front connected breakers are simpler to land cable on in a straight enclosure and easier to service without pulling the breaker. The 314C960G11 converts an 800A M-frame Series C breaker to the rear connected arrangement, with studs projecting 8.41 inches back.
6) Where can I find the dimensional drawing for the 314C960G11 stud kit?
Eaton publishes a spec sheet for 314C960G11 and it is linked from the product information for the part. That sheet is the place to confirm stud pole spacing and hole pattern against your bus drawing.
7) Is the 314C960G11 a single kit or do I order one per pole?
It is ordered as one Eaton part number, 314C960G11, covering the rear connected stud accessory for the 800A M-frame Series C breaker it is matched to. There is one model configuration, so there is nothing else to specify beyond confirming the breaker frame and amp rating.
How fast can I get the B-LINE 314C960G11 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 314C960G11 come with a warranty?
Absolutely. The B-LINE 314C960G11 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 314C960G11?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 314C960G11 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.