Service Entrance Fittings

2-1/2 INCH SERVICE ENTRANCE CAP

SVC-ENT CAP 2IN PVC

SVC-ENT CAP 1-1/2IN PVC

SVC-ENT CAP 1-1/4IN PVC

SVC-ENT CAP 3/4IN PVC

4 INCH SERVICE ENTRANCE CAP

3 INCH SERVICE ENTRANCE CAP

Zinc die-cast, 2" three letter coded Gland-type service entrance cable connector that is listed to handle different cable sizes.WTC210 - spec sheet

Zinc die-cast, 1-1/2" two letter coded Gland-type service entrance cable connector that is listed to handle different cable sizes.WTC150 - spec sheet

Zinc die-cast, 1-1/4" two letter coded Gland-type service entrance cable connector that is listed to handle different cable sizes.WTC125 - spec sheet

Roof Topper, 5" wide base only. With Strut. 4" High.RTSE405 - spec sheet

PVC Sill Plate, Wire Size (3)#4, (3)#0. Comes with screws and compound.

PVC entrace cap with galvanized steel strap. Wire Size (2)1/0, 2 4/0. Wire Hole Size, two at .69PVC662 - spec sheet

Plated steel, 2/3 wire range, 2-hole cable straps for service entrance flat cable.

PVC entrace cap with galvanized steel strap. Wire Size (2)#3, #6, #4 and #2. Wire Hole Size, two at .53PVC660 - spec sheet

4" Aluminum entrance cap, clamp on type for rigid IMC and EMT. Hole Sizes 3 at 1.73 and 4 at 1.10149 - spec sheet

3" Aluminum entrance cap, clamp on type for rigid IMC and EMT. Hole Sizes 3 at 1.73 and 4 at 1.10147 - spec sheet

Zinc die-cast, 1/2 Knockout, 45 degree angle cable connector for aluminum and steel cable. Concrete tight when taped. Secures into knockout with zinc diecast locknut.

2-1/2" Aluminum entrance cap, clamp on type for rigid IMC and EMT. Hole Sizes 3 at 1.31 and 3 at .87 and 1 at .99146 - spec sheet

Mast Kit, 2-1/2" trade size. Kit provies an assorment of service entrance mast components for installing overhead service drops in residential and commercial buildings using conduit. Includes Entrance Cap, Roof Flashing, Straps, Lag Bolts, Ampere Service.

Service entrance cable caps, zinc die-cast, 2-Hole Sizes - .80, Max wire diamter of 1/0 - 4/0662 - spec sheet

2" Aluminum entrance cap, clamp on type for rigid IMC and EMT. Hole Sizes 2 at .75 and 3 at 1.0 and 1 at .53145 - spec sheet

Service entrance cable caps, zinc die-cast, 2-Hole Sizes - .58, Max wire diamter of 7/8"660 - spec sheet

Mast Kit, 2" trade size. Kit provies an assorment of service entrance mast components for installing overhead service drops in residential and commercial buildings using conduit. Includes Entrance Cap, Roof Flashing, Wire Holder, Straps, Ampere Service.