Specifications:
- Door Configuration: Configuration #4
- Plate Size: 2" x 10.5"
- Material: Brass
- Plate Style: Concord
- Keyed: No
- Function: Non-Keyed – Thumbturn Inside
- Product Type: Multi Point Lock Trim
Emtek 1483 Multi Point Lock Trim (Door Config #4) - Brass Plates, Concord Style (2" x 10.5"), Non-Keyed American Style Thumbturn Inside
- Can be ordered with any Brass Levers
- Swinging Patio Door Hardware. Set includes Plates, Handles
- Multi Point Mortise Lock Box not included. Trims Only
- Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
Manufacturer Resources
Product Specs
- Subcategory:
- Multi Point Lock Trim
- Product Group:
- Mechanical Locks
- Commercial/Residential:
- Residential
- Product Type:
- Multi Point Lock Trim
- Product Subgroup:
- Multi Point Lock Trim
- Collection:
- Brass
- Cylinder Position:
- Above Handle
- Door Configuration:
- #4
- Electronic:
- No
- Keyed:
- No
- Lock Type:
- Multi Point Trim
- Ref. Door Manufacturer(s):
- Ashland, G-U, Caradco, JELD-WEN, Jeldwen Custom Collection (formerly Pozzi), Marvin, PGT, Premium Collection (formerly Norco), Weathershield
- Series:
- Concord
- Theme:
- American Classic
- MAP Policy:
- Yes
- Product Model:
- 1483
- (CTC) Center-to-Center:
- 3-5/8"
- Product Function:
- Non-Keyed American Style Thumbturn Inside
- Product Size:
- 2" x 10-1/2"
- Cylinder Classification:
- American
- Product Style:
- Concord
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 1483-US15 – Frequently Asked Questions
1) Does the Emtek 1483 Concord multi point trim include the multi point lock itself?
No. The Emtek 1483 is trim only: plates and handles. The multi point mortise lock box is a separate purchase, so you need an existing working lock body in the door or you have to source one alongside the trim.
2) Will the Emtek 1483 trim line up with my existing patio door lock prep?
It is built for Door Configuration #4 with a 3-5/8 inch center-to-center between the handle and the cylinder hole, and the cylinder sits above the handle. Measure that dimension on your door and confirm your keyhole is above, not below, the lever. If your prep is a different configuration or spacing, this plate will not land on the existing holes.
3) Which patio door brands does this Emtek multi point trim reference?
Emtek references the 1483 Concord trim against Ashland, G-U, Caradco, JELD-WEN, Jeldwen Custom Collection (formerly Pozzi), Marvin, PGT, Premium Collection (formerly Norco) and Weathershield multi point systems. Match the door configuration and the 3-5/8 inch center-to-center on your actual door before ordering.
4) Is the Emtek 1483 keyed, and how does it lock from inside?
The 1483 is the non-keyed version. Inside operation is an American style thumbturn, and the cylinder opening is sized for an American cylinder classification. If you need a key cylinder on the exterior, you want the keyed variant of this trim instead.
5) What do I have to specify when ordering Emtek 1483 trim?
Three things beyond finish: lever style, handing, and door thickness. Handing is right hand or left hand and is required. Lever choice runs across the full brass lever range, from L-Square, T-Bar and R-Bar bar levers in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through Athena, Luzern, Poseidon, Cortina, Milano, Rope, Rustic, Santa Fe, Wembley and the rest. Door thickness is entered as text so Emtek can build the spindle correctly.
6) Do Emtek multi point levers sag over time?
Emtek now builds a spring assist into every multi point lock trim set, including the 1483. It returns the lever to horizontal after each use, which is what keeps long patio door levers from drooping.
7) Is the Emtek 1483 suitable for a commercial opening?
Emtek classifies this Concord multi point trim as residential. It is swinging patio door hardware, so for a commercial entrance under a hardware schedule you should be specifying a Grade 1 or Grade 2 commercial lockset rather than this trim.
8) What finishes does the Emtek 1483 Concord trim come in?
Eight brass finishes: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL) and French Antique (US7). Unlacquered Brass is the one that will patina over time, so pick it only if you want the door hardware to age along with the rest of the house.
9) Is the Emtek 1483 an electronic or smart lock trim?
No, it is purely mechanical trim. There is no electronic component and no keyway on this version, just the lever, plates and an inside thumbturn driving the multi point lock body.
How fast can I get the Emtek 1483-US15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1483-US15 come with a warranty?
Absolutely. The Emtek 1483-US15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1483-US15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1483-US15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.