Emtek 1485 Multi Point Lock Trim (Door Config #4) - Brass Plates, Concord Style (2" x 10.5"), Dummy Pair

No. The 1485 Concord set is trim only: plates and handles. The multipoint mortise lock box is a separate order, so you need the lock already in the door or bought alongside. Because it's the dummy pair, both sides are inactive handles, which is what goes on the fixed leaf of a swinging patio door or an inactive panel.

It's built to Emtek's Door Configuration #4 layout, with 3-5/8 inch center-to-center between handle and cylinder position and the cylinder location above the handle. Match that config and spacing to what's in your door before ordering. Emtek references this trim against multipoint doors from Ashland, G-U, Caradco, JELD-WEN, Jeldwen Custom Collection (formerly Pozzi), Marvin, PGT, Premium Collection (formerly Norco) and Weathershield.

No new prep. The 1485 plates are surface mount, so they land over the existing multipoint lock prep rather than requiring their own bore. That's what makes this a practical swap on an already-installed patio door where you only want to change the look.

Not keyed. The dummy pair has no cylinder and no locking function, so it's for the inactive or fixed leaf. If you need the leaf to lock, you want the keyed version of the Config #4 trim instead, which takes an American standard cylinder.

Yes, handing is required at order: right hand or left hand. Even though a dummy doesn't operate a latch, the lever and plate geometry is handed, so a wrong call means the lever points the wrong way on the door. Determine the hand from outside the door, standing on the exterior side of the patio slab.

The Concord plate measures 2 x 10-1/2 inches. That's a narrow, tall plate, so it covers a vertical run of old fastener holes well but won't hide anything wider than 2 inches across. Measure the footprint of what's coming off the door before you count on it concealing the previous marks.

Lever style is a required choice and the range is wide: L-Square, T-Bar and R-Bar bars in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, plus cast levers like Athena, Helios, Hermes, Luzern, Poseidon, Stuttgart, Cortina, Milano, Merrimack, Turino, Coventry, Rope, Rustic, Santa Fe, Wembley, Arts and Crafts and Hammered. Any brass lever pairs with these brass plates, so you can match the lever already used on the interior doors of the house.

It's a residential product. Emtek lists the Concord multipoint trim as residential, solid brass, for swinging patio doors. For a multi-family common entry or a commercial opening on a high cycle count, spec commercial-grade hardware rather than this line.

Eight: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A), Flat Black (US19), Polished Chrome (US26), Polished Brass Lifetime (US3), Unlacquered Brass (US3NL) and French Antique (US7). Unlacquered brass is the one to note if you're matching a fleet of units, it patinas over time rather than holding its as-shipped colour.

Purely mechanical. There's no electronics in the 1485 trim, no wiring, no power. It's plates and levers over a mechanical multipoint mortise lock, so nothing drops out if the building loses power.