Emtek 1585 Multi Point Lock Trim (Door Config #5) - Brass Plates, Concord Style (2" x 10.5"), Dummy Pair

No. The 1585 Concord set is trim only: plates and handles. The multipoint mortise lock box is a separate purchase, so you need to already have a compatible multipoint lock in the door or order one alongside. This particular set is the dummy pair, meaning both sides are fixed handles with no working spindle or latch retraction, which is what goes on the inactive leaf of a swinging patio door.

Handing matters, and you pick Right Hand or Left Hand when you order. Even on a dummy set the lever geometry and the plate orientation are handed, so the wrong hand will read backwards on the door. Stand outside the door: if the hinges are on your right it is right hand.

No door prep. The 1585 plates are surface mount, so they cover the existing face of the door and fasten over the lock. That is what makes this a practical refresh on an existing patio door where you are changing the look of the hardware but keeping the multipoint lock that is already in the stile.

The Concord plates measure 2 x 10-1/2 inches. That footprint needs a stile wide enough to take a 2 inch plate without crowding the glass stop or the door edge, so check the flat face of your patio door stile before you commit.

Yes, and it's a required choice on the order. Any Emtek brass lever works with these plates, and the list runs from the L-Square, T-Bar and R-Bar bar levers in Faceted, Hammered, Knurled, Tribeca, Straight Knurled and White Marble, through Athena, Helios, Hermes, Luzern, Poseidon and Stuttgart, to traditional patterns like Cortina, Milano, Merrimack, Turino, Coventry, Ribbon & Reed, Rope, Rustic, Santa Fe, Wembley, Arts & Crafts and Hammered. Pick the lever to match the knobs and levers on the rest of the interior doors.

The dummy pair is not keyed and comes with no cylinder. The plate is machined for a Euro profile cylinder positioned below the handle, which is what the active leaf of the same door uses, but on a dummy set that opening is not doing any locking work. If you need the keyed active side, order the keyed version of the Config #5 trim instead of this one.

Emtek classes the 1585 as residential hardware. It is meant for swinging patio doors on houses and single-family style openings. For a commercial entry, a multi-family common door, or anywhere with a code-driven egress or fire requirement, this is the wrong family of hardware, and you want a commercial-grade lockset rather than residential patio trim.

Brass through and through, both the material and the underlying substrate. That matters on an exterior patio door where a plated pot metal handle will pit at the edges, and it is why the Unlacquered Brass option can be left to age rather than needing a coating to survive.

Mechanical only. The 1585 Concord set has no electronic option, no keypad and no wiring provision, so if you want code or app entry on a patio door you need to look at an electronic multipoint solution instead of this trim.