Emtek 1725 Multi Point Lock Trim (Door Config #7) - Sandcast Bronze Plates, Modern Style (2" x 10"), Dummy Pair

No. The 1725 is trim only, a dummy pair: plates and handles. The multi point mortise lock box is not included, and because this is the dummy function there is no latching or locking mechanism behind it. Order the multi point lock box separately if the door needs to operate.

On a pair of swinging patio doors, only one leaf is active. The 1725 dummy pair dresses the inactive (fixed) leaf so it matches the operating door: same 2 x 10 inch Sandcast Bronze plates, same lever, but nothing moves. It is pull-only hardware, no keying and no electronics.

Yes, it covers 1-3/8 inch through 1-3/4 inch doors, which spans standard commercial-thickness and lighter residential slabs. There is also an optional door thickness entry on the order, so state your actual slab thickness when you place it.

Emtek indexes multi point trim by door configuration, and the 1725 is config #7: a cylinder opening positioned above the handle, with 6 inch center-to-center between the handle and that opening. Your existing plate or lock layout has to match that geometry, so compare the 6 inch CTC and the above-handle cylinder location against the door before ordering.

Three choices. Finish: Flat Black Bronze, Medium Bronze, or Tumbled White Bronze. Lever style, from ten Sandcast Bronze levers (Aurora, Bryce, Cimarron, Cody, Durango, Lariat, Mariposa, Montrose, Teton, Yuma). And handing, right or left. Door thickness is an optional text entry.

No door prep is required. The 1725 plates are surface mounted, which is why the dummy pair can go onto a fixed patio leaf that was never machined for hardware.

Yes, handing is a required selection, right hand or left hand. Even with no working latch, the lever throw and plate orientation are handed so the dummy leaf reads the same as the active door.

Emtek lists Trillenium, formerly W&F Manufacturing, as the reference door manufacturer for this configuration. If your patio doors came from that maker, config #7 with 6 inch CTC and the cylinder above the handle is the layout to check against.

Emtek classes the 1725 as residential. It is sandcast bronze patio door trim for homes and rustic-style interiors, not specified for commercial traffic. For an institutional or high-traffic entry, look at commercial-graded mortise trim instead.

Yes, within the same family. The 1725 uses 2 x 10 inch Modern-style Sandcast Bronze plates, 6 inch center-to-center, cylinder above the handle, and it can be ordered with any Sandcast Bronze lever. Specify the active leaf trim in the same configuration, plate size, finish, and lever so the two leaves read as one set. The dummy itself is unkeyed; cylinders are American-type on the keyed versions of this configuration.

Solid bronze plates and handles from the Sandcast Bronze collection, offered in Flat Black Bronze, Medium Bronze, and Tumbled White Bronze. Sandcast bronze is a living finish, so expect the surface to develop character with handling and exposure rather than stay uniform.