Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Mount: Surface Mount (no door prep required)
- Material: Brass
Emtek 1745 Multi Point Lock Trim (Door Config #7) - Lost Wax Cast Bronze Plates, Tuscany Style (1.5" x 11"), Dummy Pair
- Can be ordered with any Lost Wax Cast Bronze Levers (any Tuscany Bronze Levers)
- Swinging Patio Door Hardware. Set includes Plates, Handles
- Multi Point Mortise Lock Box not included. Trims Only
Manufacturer Resources
Product Specs
- Subcategory:
- Multi Point Lock Trim
- Product Group:
- Mechanical Locks
- Commercial/Residential:
- Residential
- Product Type:
- Multi Point Lock Trim
- Product Subgroup:
- Multi Point Lock Trim
- Collection:
- Tuscany Bronze
- Cylinder Position:
- Above Handle
- Door Configuration:
- #7
- Electronic:
- No
- Keyed:
- No
- Lock Type:
- Multi Point Trim
- Ref. Door Manufacturer(s):
- Trillenium (formerly W&F Manufacturing)
- Series:
- Tuscany
- Theme:
- Tuscany
- MAP Policy:
- Yes
- Product Model:
- 1745
- (CTC) Center-to-Center:
- 6"
- Product Function:
- Dummy
- Product Size:
- 1-1/2" x 11"
- Cylinder Classification:
- American
- Product Style:
- Tuscany Bronze
- Product Material:
- Bronze
- Product Category:
- Mechanical Locks
- Product Substrate:
- Bronze
- Department:
- Door Hardware
Emtek 1745-MB – Frequently Asked Questions
1) Does the Emtek 1745 Tuscany multi point trim include the multi point lock mechanism?
No. The 1745 is trim only: plates and handles. The multi point mortise lock box is not included, so you order the gearbox separately or use the one already in the door. Note this is the dummy pair version, meaning it does not operate a lock at all, it is fixed hardware for the inactive or non-operating leaf.
2) What door thickness does the Emtek 1745 multi point trim fit, and does the door need machining?
It fits doors 1-3/8 inch to 1-3/4 inch thick and mounts on the surface, so no door prep is required. There is also an optional door thickness field at order time if your slab is a specific dimension you want noted.
3) What is the center-to-center spacing on the Emtek 1745 Tuscany plate, and will it cover my existing holes?
Center-to-center is 6 inches, with the cylinder position above the handle. The plate itself measures 1-1/2 by 11 inches. If your existing multi point door is drilled to a 6 inch CTC with the cylinder hole above the lever, the 1745 lines up; anything else will not.
4) Do I have to specify handing on the Emtek 1745 dummy pair?
Yes, handing is required. You choose right hand or left hand at order. Even as a dummy set, the plate orientation and lever throw follow the door swing, so an incorrect call means the hardware sits backwards on the slab.
5) Which levers and finishes can I get with the Emtek 1745 Tuscany bronze trim?
Lever choice is required and covers four Tuscany lost wax cast bronze styles: Medici, Napoli, Octagon, and Padua. Finish comes in Flat Black Bronze (FB) or Medium Bronze (MB). Any Tuscany bronze lever can be paired with these plates, so you can match levers already running elsewhere in the house.
6) Is the Emtek 1745 keyed, and what cylinder does it take?
It is not keyed. As a dummy pair there is no cylinder supplied and no keying to specify. The configuration itself is set up for an American cylinder above the handle, which is what the active-leaf keyed trim in the same configuration uses.
7) Should I use a dummy trim set or a keyed set on my French patio doors?
On a pair of swinging patio doors, the active leaf gets keyed or operating multi point trim over a working gearbox; the inactive leaf takes a dummy pair like the 1745, which is fixed and gives you matching handles inside and out without any latching function. Buy the dummy only if that leaf stays shut or is secured by flush bolts.
8) Is the Emtek 1745 Tuscany trim suitable for a commercial building entrance?
It is classed residential. The Tuscany bronze multi point trim is intended for swinging patio doors in homes, not for commercial openings where graded, fire rated hardware is called for.
9) What are the Emtek 1745 plates made of?
Lost wax cast bronze plates and handles, solid bronze substrate, offered in Flat Black Bronze or Medium Bronze. Cast bronze in a living finish will patina with handling and weather exposure over time, which is typical for the Tuscany collection.
How fast can I get the Emtek 1745-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 1745-MB come with a warranty?
Absolutely. The Emtek 1745-MB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 1745-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 1745-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.