Emtek 3009 Versailles Brass Mortise Entrance Handleset - Dummy

Dummy function, so there's no latch and no cylinder. The 3009 Versailles is a surface-mounted pull with an inside knob or lever that turns but operates nothing. Use it on the inactive leaf of a double door, a closet, or a pantry door held by a roller catch or ball catch. If you need the door to latch or lock, order the keyed or entrance version of the mortise handleset instead.

Standard mortise pocket to ANSI A115.1. If the door already carries a mortise lock cut to that prep, the 3009 drops into the existing pocket. It will not go into a door bored for a cylindrical lockset, that's a 2-1/8 inch cross bore and a completely different cut, so a bored door has to be re-machined for a mortise pocket first.

No, it's a complete set, but the inside trim style is a required choice on the order. There are close to 90 options across the brass knob and lever range, from the Stuttgart and Athena levers to the Round, Octagon and Windsor Crystal knobs, plus the L-Square, T-Bar and R-Bar bar-style knobs in faceted, hammered, knurled, Tribeca and white marble variants. Pick one and it ships as one set with the exterior Versailles plate.

That's the usual application. The 3009 dummy carries no latch, so the inactive leaf gets held by flush bolts top and bottom or a surface bolt, and the handleset just gives you matching hardware on both leaves. Order the keyed mortise version for the active leaf in the same finish and the same inside trim style, and the pair reads as one set.

The 3009 Versailles is a mortise lock type and handing must be called out left or right at order, which is why it comes in LH and RH across every finish. Bored handlesets do not carry that requirement in the same way. The Schlage Residential F60 Addison with Accent Lever and the JE285 Barcelona with Seville Lever are both Grade 2 sets for 1-3/8 inch to 1-3/4 inch doors, and the Kwikset 687AMD Amador and 687BW Belleview are Grade 3 exterior-only handlesets for 1-3/4 inch doors. If handing is the sticking point on a job, those bored sets sidestep it; if the door already has a mortise pocket, the Baldwin Estates 6542 Tremont mortise trim stays in the same prep.

The 3009 Versailles is a 1-3/4 inch door standard with thicker doors specified at time of order. For a 1-3/8 inch door, the Deltana 810871 Montego Handleset covers 1-3/8 inch to 2 inch, and the Pamex FS7P31 Lexington Single Cylinder Handleset in satin nickel covers 1-3/8 inch to 1-3/4 inch as an entry function. Among dummy sets, the Weslock 6695 Belmont with Impresa Knob and the Weslock 2815 Hillcrest with New Heaven Lever both list 1-3/8 inch to 2 inch, so either drops onto a thinner door without the trim standing proud.

The Weslock 6695 Belmont Dummy Handleset with Impresa Knob is the nearest peer in function: it is a dummy handleset, the same non-latching pull-and-trim arrangement as the 3009 Versailles, whose Lock Function is Dummy. The Weslock 2815 Hillcrest Dummy Handleset with New Heaven Lever is the other dummy option, with a lever rather than a knob on the interior. Both Weslock dummy sets carry a 1-3/8 inch to 2 inch door thickness range, while the 3009 Versailles is built around 1-3/4 inch doors as standard with thicker doors specified at order. The Emtek is solid brass and takes any Emtek brass knob or lever for the inside trim.

The 3009 Versailles is a dummy, so it has no latch and no cylinder. For a keyed opening, the Baldwin Estates 6542 Tremont Single Cylinder Entry Mortise Trim keeps the mortise format and is an entrance function on a 1-3/4 inch door, with the Baldwin Estates 6542 Tremont Double Cylinder version for openings that need a key on both sides. If the door is prepped for a bored lock rather than a mortise pocket, the Schlage Residential F60 Addison Single Cylinder Keyed Entry Handleset with Accent Lever is a Grade 2 entrance set for 1-3/8 inch to 1-3/4 inch doors, and the Weslock 1411 Traditionale Colonial Handleset with Eleganti Knob is a single cylinder set covering 1-3/4 inch to 2-1/4 inch doors.

Either 2-1/2 or 2-3/4 inches. That's the distance from the door edge to the center of the knob or lever hub, and it has to match the pocket already cut in the door. Measure your existing mortise lock before ordering, since a 2-1/2 body will not line up with holes drilled for a 2-3/4.

Residential. The Versailles brass handleset is built for houses and multi-family interiors rather than commercial traffic. If you're specifying to a commercial grade, look at a Grade 2 handleset such as the Schlage Residential F60 Addison or the Master Lock HDLB Series single cylinder deadbolt handleset, though note those are keyed entrance functions, not dummies.

Not this one, the 3009 dummy is non-keyed and takes no cylinder at all. The keyed mortise handlesets in the Emtek brass line are cut to Schlage C keyway, so a keyed version can be worked into an existing Schlage C system by a locksmith. For the dummy, keying simply doesn't apply.

The 3009 Versailles is entirely mechanical with no electronic component. For a powered opening, the Kwikset 815SCEHFL-CP913CNT San Clemente Handleset pairs a Halifax lever interior with a contemporary SmartCode keypad deadbolt on a 1-3/4 inch door and ships with the RCAL latch and RCS strike. On the Yale side, the BYRD226NRRX Assure Lock is a standalone touchscreen deadbolt with the Ridgefield handleset, and the BYRD226CBARX adds Wi-Fi and Bluetooth; both cover 1-3/4 inch to 2-1/4 inch doors. The BYRD256 CBARX is the key free touchscreen version with a Ridgefield passage handleset and trim.

They are not interchangeable by function. The Baldwin Wesley Handleset x Alcott Knob and the Wesley Handleset x Carnaby Knob are both entrance function, meaning a latching, operating exterior set. The 3009 Versailles is a dummy - non-keyed, no latch, surface mounted as a pull with matching interior trim. A Wesley set will not go into a door prepped only for a dummy, and the 3009 will not secure an opening that needs to latch. If the aim is a Baldwin look on an inactive leaf, compare against the Weslock 6695 Belmont Dummy Handleset instead, which shares the dummy function.

Both are solid brass handlesets - the 3009 Versailles is brass substrate throughout, and Deltana offers the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston in solid brass. The dividing line is function: all three Deltana sets are entry function, while the 3009 Versailles is a dummy with no latch or cylinder. The Emtek also differs in inside trim: it is ordered as a complete set with any Emtek brass knob or lever specified for the interior, in finishes from unlacquered brass and polished brass through oil rubbed bronze, pewter, satin nickel, polished chrome and French antique.

A dummy like the 3009 Versailles holds the door closed with nothing more than a catch, so if the leaf needs to latch, look at a passage or non-keyed operating set. The Schlage Residential JE285 Barcelona Style Handleset with Seville Lever is a non-keyed entry function, Grade 2, for 1-3/8 inch to 1-3/4 inch doors. The Schlage Residential JI18/19 is an interconnected passage lock with a keyed deadbolt and Torino lever in satin stainless steel, Grade 2, same 1-3/8 inch to 1-3/4 inch range, for openings that want passage operation plus a separate deadbolt.

The 3009 Versailles is a residential solid brass mortise handleset in dummy function, ordered as a complete set with the interior knob or lever style specified. Peers that carry a stated grade include the Master Lock HDLBA0615/4D Grade 2 single cylinder deadbolt handleset in the HDLB Series, the Schlage Residential F60 Addison at Grade 2, and the Kwikset 687AMD Amador and 687BW Belleview at Grade 3 for 1-3/4 inch doors. Those are keyed entrance sets, so for a unit entry door needing a working cylinder they answer a different need than the dummy 3009, which handles inactive leaves and French door pairs.

The 3009 Versailles is non-keyed dummy trim, and the Versailles mortise handlesets are built around the Schlage C keyway when keyed versions are specified. The Kwikset options run a different path: the 687AMD Amador is offered as an SMT SmartKey version and as the 687AMD SMC with an SC1 keyway SmartKey cylinder, both Grade 3 exterior-only handlesets for 1-3/4 inch doors, and the 687BW Belleview is an SMT SmartKey set. An SC1 keyway Kwikset will accept a Schlage-profile key blank; an SMT-only version keys to the Kwikset system instead.

Eight, all on a solid brass body: Polished Brass Lifetime (US3), Unlacquered Brass (US3NL), French Antique (US7), Oil Rubbed Bronze (US10B), Satin Nickel (US15), Pewter (US15A) and Polished Chrome (US26). If you're matching hinges and other trim across a house, note that the unlacquered brass is meant to patina and darken with handling while the lifetime polished brass is clear-coated to hold its color.