Emtek 3017 Brisbane Brass Mortise Entrance Handleset - Dummy
- Can be ordered with any Brass Knob or Lever for the inside trim
- Sold as complete set.
- Handing required for All Mortise Locks
Specifications:
- Backset: 2-1/2" or 2-3/4"
- Door Prep: Standard Mortise ANSI A115.1
- UL Function: ANSI F20 or F13
- Door Thickness: 1-3/4" standard (specify if thicker)
- Keyway: Schlage C
- Handing: Required – specify left or right
- Fire Rating: UL 180 minute
Manufacturer Resources
Product Specs
- Subcategory:
- Mortise Entry Sets
- Collection:
- Brass
- Product Type:
- Handlesets
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Mortise Locks and Trim
- Commercial/Residential:
- Residential
- Keyed Function:
- Non-Keyed
- Lock Type:
- Mortise
- Keyed:
- No
- Lock Function:
- Dummy
- Series:
- Brisbane
- Theme:
- Contemporary
- Electronic:
- No
- Handle Type:
- Handleset
- MAP Policy:
- Yes
- Product Model:
- 3017
- Product Function:
- Dummy
- Product Style:
- Contemporary
- Product Material:
- Brass
- Product Category:
- Mechanical Locks
- Product Substrate:
- Brass
- Department:
- Door Hardware
Emtek 3017-RH-US26 – Frequently Asked Questions
1) Is the Emtek 3017 Brisbane handleset a working lock or just a dummy?
Dummy only. The Brisbane 3017 is a non-keyed, non-latching trim set, so there is no latchbolt or cylinder and nothing operates. It is meant for an inactive leaf of a pair of doors or a door that is held shut by other means. If you need a working entrance function, order the keyed mortise entrance version of the Brisbane instead.
2) Do I have to specify handing when ordering the Emtek Brisbane mortise handleset?
Yes, handing is required on all Emtek mortise sets, and the Brisbane is ordered as either LH or RH. Both hands are offered in all six finishes. Stand outside the door: if the hinges are on your left it is a left hand, hinges on the right is a right hand.
3) What backset and door prep does the Emtek Brisbane mortise handleset need?
It takes a standard mortise pocket cut to ANSI A115.1, with a 2-1/2 inch or 2-3/4 inch backset. That means a rectangular mortise in the edge of the door, not a 2-1/8 inch cross bore, so it is not a drop-in for a tubular handleset prep.
4) What is a dummy handleset equivalent to the Emtek 3017 Brisbane if I need a lever on the inactive door instead of a knob?
The Emtek 3017 Brisbane is a dummy-function brass mortise handleset, and its inside trim is chosen from the knob or lever list, so a lever such as the Stuttgart or Athena can be specified on the Brisbane itself. If you want a factory-paired lever dummy instead, the Weslock 2815 Hillcrest is a dummy handleset supplied with the New Heaven lever in the Premiere Essentials series. The Weslock covers a 1-3/8 inch to 2 inch door thickness range, while the Brisbane is built around a 1-3/4 inch door as standard with thicker doors specified at order.
5) I ordered the Emtek 3017 Brisbane dummy but the door actually needs to latch and lock. What should I use instead?
The 3017 Brisbane is a dummy, so it neither latches nor locks. For a keyed opening in a similar handleset format, the Schlage Residential F60 Addison is a single cylinder keyed entry handleset with the Accent lever, Grade 2, for doors 1-3/8 inch to 1-3/4 inch thick. If you want to stay with mortise trim, the Baldwin Estates 6542 Tremont is offered in single cylinder and double cylinder entry mortise trim for 1-3/4 inch doors.
6) Which non-keyed handleset works on a door that still needs to open and close, since the Emtek 3017 Brisbane is a dummy?
A dummy such as the 3017 Brisbane is surface-mounted trim with no latching, suited to an inactive or fixed leaf. If the door swings and needs to latch without a key, the Schlage Residential JE285 Barcelona handleset with the Seville lever is a non-keyed entry function, Grade 2, for 1-3/8 inch to 1-3/4 inch doors.
7) My door is thicker than 1-3/4 inch. Does the Emtek 3017 Brisbane still work, or is another handleset a better fit?
The 3017 Brisbane is built for a 1-3/4 inch door as standard, with a thicker door specified at the time of order. If you prefer a product whose range already spans thicker doors, the Weslock 1411 Traditionale Colonial handleset covers 1-3/4 inch to 2-1/4 inch, and the Weslock 2810 Hillcrest covers 1-3/8 inch to 2 inch.
8) For a double door where one leaf is fixed, should I use the Emtek 3017 Brisbane on both leaves?
Use the 3017 Brisbane dummy on the fixed leaf, where its non-latching trim is the point, and put an operating handleset on the active leaf. The Pamex FS7P31 Lexington is a single cylinder entry handleset for 1-3/8 inch to 1-3/4 inch doors, and the Sure-Loc Madison is a keyed entry handleset with adjustable backset. Both handlesets on the pair can be ordered in a matching finish family such as satin nickel.
9) Can I pick the inside knob or lever on the Emtek Brisbane handleset?
Yes, and it is a required choice at order. The inside trim can be any Emtek brass knob or lever, from levers like Stuttgart, Helios, Athena, Luzern and Cortina to knobs such as The Ace, Spoke, Round, Egg and the crystal knobs like Bristol and Windsor. The set ships complete with the exterior handle and the interior trim you selected.
10) What finishes does the Emtek 3017 Brisbane brass handleset come in?
Six: Oil Rubbed Bronze (US10B), Satin Nickel (US15), Flat Black (US19), Polished Chrome (US26), Unlacquered Brass (US3NL) and Satin Brass (US4). All six are available in both left and right hand. Unlacquered brass is a living finish and will patina over time, so pick it only if you want that change.
11) If I want a matching keyed entry instead of a dummy, does the Brisbane use a Schlage key?
The Brisbane brass mortise entrance handlesets are cut to the Schlage C keyway, so a keyed version keys into an existing Schlage C system. The 3017 dummy itself has no cylinder and is non-keyed.
12) What are some other dummy handlesets if I don't want to cut a mortise pocket?
A tubular-prep dummy handleset avoids the mortise pocket entirely. The Weslock 2815 Hillcrest dummy handleset with New Heaven lever and the Weslock 6695 Belmont dummy handleset with Impresa knob are both dummy function and both list a 1-3/8 to 2 inch door thickness range, which is wider than the Brisbane's 1-3/4 inch standard. You give up the solid brass mortise construction and the Emtek trim selection.
13) Can an electronic handleset replace the Emtek 3017 Brisbane on an entry door?
No, they solve different problems. The 3017 Brisbane is a non-electronic dummy with no key and no latch. If the opening calls for electronic access, the Yale Real Living BYRD226CBARX pairs a Wi-Fi and Bluetooth touchscreen deadbolt with the Ridgefield handleset for 1-3/4 inch to 2-1/4 inch doors, and the Kwikset 815SCEHFL-CP913CNT San Clemente pairs a SmartCode keypad electronic deadbolt with a Halifax lever interior for 1-3/4 inch doors.
14) Do I still have to specify handing if I switch from the Emtek 3017 Brisbane to a tubular handleset?
Handing must be specified on the 3017 Brisbane because it is a mortise lock, and the product is stocked in left hand and right hand versions across its finishes. Tubular alternatives are ordered differently: the Sure-Loc Alta is a tubular handleset with an adjustable backset, and the Sure-Loc Aspen, Coral and Madison handlesets are likewise built with adjustable backset rather than a fixed mortise prep.
15) What is the difference between the Emtek 3017 Brisbane and a Baldwin Estates 6542 Tremont mortise trim?
Both are mortise-prepped brass trim. The 3017 Brisbane is a dummy handleset sold as a complete set with the inside knob or lever chosen at order, in left or right hand, over a standard ANSI A115.1 mortise prep with 2-1/2 inch or 2-3/4 inch backset. The Baldwin Estates 6542 Tremont is entrance function and is offered as single cylinder or double cylinder entry mortise trim for 1-3/4 inch doors.
16) Is a Kwikset Amador exterior-only handleset a substitute for the Emtek 3017 Brisbane dummy?
They are not interchangeable. The Kwikset 687AMD Amador is a single cylinder keyed entry handleset supplied as exterior trim only, Grade 3, for 1-3/4 inch doors, and it is an SC1 SmartKey keyed product. The Emtek 3017 Brisbane is a non-keyed dummy sold as a complete set including the interior knob or lever you select.
17) I need a solid brass handleset but for an entry door rather than the dummy Emtek 3017 Brisbane. What are the options?
The Brisbane is brass construction but dummy function. For solid brass entry handlesets, Deltana offers the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry function in solid brass, and the 810871 Montego handleset covers doors 1-3/8 inch to 2 inch thick.
18) Does the Emtek 3017 Brisbane carry an ANSI grade like the Schlage or Master Lock handlesets?
The 3017 Brisbane is a residential brass mortise handleset carrying a UL 180 minute fire rating and an ANSI F20 or F13 UL function over a standard ANSI A115.1 mortise prep. Peers state grade instead: the Schlage Residential F60 Addison and JE285 Barcelona are Grade 2, the Master Lock HDLB Series single cylinder deadbolt handleset is Grade 2, and the Kwikset 687BW Belleview is Grade 3.
19) We key our building to Schlage C. Which handlesets besides the Emtek 3017 Brisbane match that keyway?
The 3017 Brisbane is specified with a Schlage C keyway, though as a dummy it is supplied non-keyed. Among keyed alternatives, the Kwikset 687AMD Amador is offered in an SC1 keyway SmartKey version, which is the same Schlage-style keyway family, as well as a standard SmartKey version.
20) Is the Emtek Brisbane handleset rated for commercial use?
It is catalogued as a residential product. For a commercial opening needing a graded lock, a Schlage Residential F60 Addison is Grade 2, and the Master Lock HDLB Series single cylinder deadbolt handleset is also Grade 2, though neither is a mortise set. The Brisbane's strength is solid brass construction and finish selection on a home or high-end residential door.
21) What is the Brisbane handleset made of and what style does it suit?
Solid brass throughout, from Emtek's Brass collection, in a contemporary design. That matters for an exterior door because brass holds up outdoors and takes the plated and patina finishes offered here.
How fast can I get the Emtek 3017-RH-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Emtek 3017-RH-US26 come with a warranty?
Absolutely. The Emtek 3017-RH-US26 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Emtek 3017-RH-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Emtek 3017-RH-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.