Emtek 3347 Mormont Mortise Entrance Handleset, Brass - Entryset

Emtek 3347 Mormont Mortise Entrance Handleset - Entry Set 3347

• Can be ordered with any Brass Knob or Lever for the inside trim
• Sold as complete set. Includes Latch and Strike Plate
• 2-1/2" or 2-3/4" Backsets
• Standard Mortise Door Prep ANSI A115.1
• UL Listed Mortise with ANSI F20 or F13 Function
• Schlage C Keyway
• Handing required for All Mortise Locks

NOTE: This Mortise Handleset is designed to be used with doors prepped for a Mortise Lock, these will NOT work with a standard tubular latch prepped door. Please see the measurements tab for more information on preparing your door for a mortise lock.

Keying Alike

• Order multiple locks on your order re-keyed to the same code by indicating "Keyed Alike" next to applicable locks
• Note: Locks must use the same keyway to be Keyed Alike (ex: locks using a Schlage C Keyway cannot use the same key as Kwikset)

Keying to Code

• Order by indicating "Key Code XXXXX" next to applicable locks
• If ordering multiple groups (houses) indicate "Keyed Alike Group #_" next to applicable locks in Key Code field for each lock

This Mortise Lock Handleset is available in 3 Functions:

Single Cylinder Mortise Sideplates are locked/unlocked with a key from the exterior and locked/unlocked from the inside of the home with a thumbturn.

• The F20 Function Mortise box has buttons on the edge of the door that allow you to set the box to lock behind you as you leave the home, or another button to keep the door unlocked. This button setting is reset each time the door is locked.
• The F13 Function Mortise Box does not have the buttons on the edge of the box. This set will only lock when activated with a key outside or thumbturn inside.

Dummy: If you have a double front door where one side is generally inactive while the other is always active, you will need a combination of two sideplate locks. For the active side, you'll need a single cylinder sideplate. For the inactive door, you'll want to order a dummy sideplate. This gives you the look of a complete working set, but doesn't have all of the mechanisms - perfect for an inactive door.

Emtek Mortise Handlesets include:

• Large handleset for the exterior side of the door.
• Interior lever or knob style and backplate for the interior side.
• Mortise lock box with mounting hardware and faceplate.
• Strike plate for door jamb.
• Other required mounting screws or hardware.

Warranty

Emtek covers it's door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Returns

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a restocking fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it's original packaging to assure that it arrives undamaged. For more return information see our Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.